Servo Motor
Servo motors: SG90 and MG90S micro servos, MG995 and MG996R standard servos, 20 kg TD8120MG and 25 kg 360° high-torque servos.
-
TD8120MG 20KG 180 Degree Digital Servo
Quick Info:
- Rotation Angle : 180°
- Stall Torque : 23.5 kg.cm @6.8V
- Operating Voltage : 4.8V – 6.8V
- Weight : 60g
Rs 2,950.00Rs 3,200.00TD8120MG 20KG 180 Degree Digital Servo
Rs 2,950.00Rs 3,200.00 -
SG90 Micro Servo Motor 9g
Quick Info:
- Model : SG90
- Weight : 9g
- Rotation Angle : ~180°
- Operating Voltage : 4.8V – 6V DC
- Stall Torque : 1.8 kg·cm @ 4.8V
- Speed : 0.1 sec / 60° (no load)
- Control Signal : PWM
- Connector : 3-pin (VCC, GND, Signal)
- Compatible Boards : Arduino / ESP32 / Raspberry Pi / STM32
Rs 350.00Rs 390.00SG90 Micro Servo Motor 9g
Rs 350.00Rs 390.00 -
MG90S Metal Gear Micro Servo 9g
Quick Info:
- Gear Type : Metal
- Rotation Angle : 180°
- Operating Voltage : 4.8V to 6V
- Stall Torque : 1.8kg-cm (4.8V) / 2.2kg-cm (6V)
- Operating Speed : 0.10s/60° (4.8V) / 0.08s/60° (6V)
- Weight : About 13g
Rs 580.00Rs 890.00MG90S Metal Gear Micro Servo 9g
Rs 580.00Rs 890.00 -
25Kg 360 Degree High Torque Steel Gear Servo
Quick Info :
- Type: 360° Continuous Rotation
- Torque: 25kg·cm @ 6.8V
- Voltage: 4.8-6.8V
- Gears: Full Steel Construction
- Speed: 0.13sec/60° @ 6.8V
Rs 3,750.00Rs 3,900.0025Kg 360 Degree High Torque Steel Gear Servo
Rs 3,750.00Rs 3,900.00 -
MG995 Tower Pro Digital Servo
Quick Info:
- Gear Type : Metal
- Rotation Angle : 180°
- Operating Voltage : 4.8V to 7.2V
- Stall Torque : 9.4kg-cm (4.8V) / 11kg-cm (6V)
- Operating Speed : 0.20s/60° (4.8V) / 0.16s/60° (6V)
- Weight : 55g
Rs 1,690.00MG995 Tower Pro Digital Servo
Rs 1,690.00 -
MG996R Tower Pro Digital Servo Metal
Quick Info:
- Gear Type : Metal
- Operating Voltage : 4.8V to 7.2V
- Stall Torque : 9.4kg-cm (4.8V) / 11kg-cm (6V)
- Operating Speed : 0.17s/60° (4.8V) / 0.14s/60° (6.0V)
- Stall Current : 2.5A (6V)
- Weight : 55g
Rs 1,100.00Rs 1,350.00MG996R Tower Pro Digital Servo Metal
Rs 1,100.00Rs 1,350.00
Servos that move to a set angle: the 9 g SG90 (plastic gears) and MG90S (metal gears) micro servos, the MG995 and MG996R metal-gear standard servos, the 20 kg TD8120MG digital servo and a 25 kg continuous 360° servo. Servos take one PWM signal pin. Power anything bigger than an SG90 from a separate 5V-6V supply rather than the Arduino’s 5V pin, and share the ground. To drive many at once, use the PCA9685 servo driver.





