Quick Info :
Bluetooth: 4.0 BLE
Chipset: CC2541
Interface: UART
Voltage: 3.3V Logic
Mode: Master / Slave
Rs 950.00Rs 1,250.00
Quick Info :
Bluetooth: Version 5.0
Power: USB + Battery
Features: Calls, Sound Card, Charge-while-use
Audio: Lossless FLAC/APE/WAV/MP3
Rs 880.00Rs 1,200.00
Quick Info :
Type: Bluetooth Dongle
Bluetooth Version: 5.0
Interface: USB
Features: Plug and Play, Low Energy (BLE)
Rs 850.00Rs 1,150.00
Quick info :
6.5MM Microphone function
Bluetooth version 5.0
Power supply voltage: 12V (range 7V-16V) and current not less than 2A.
SD Card function.
Music format: MP3/WMA/WAV/APE/FLAC lossless music format.
Radio FM frequency: 87.5—107.5mhz.
Rs 1,490.00
Quick Info :
Input Voltage: DC 7V – 12V
Current: ≤1.2A working / 1.5A max
Motor Support: 3-wire & 4-wire BLDC
Speed Control: Voltage-regulated
Max Speed: ~10,000 RPM
Detection: Auto 3/4-wire recognition
Protection: Reverse polarity, over-current
Size: 63mm × 45mm
Rs 980.00Rs 1,100.00
Quick Info :
CAN Controller : MCP2515
CAN Transceiver : TJA1050
Operating Voltage: 5V
Interface: SPI
Rs 950.00Rs 1,250.00
Quick Info :
Type: External TV Tuner Box
Connectivity: VGA
Features: PIP function, FM Radio, Built-in Speaker
Compatibility: LCD, LED, and CRT monitors
Rs 6,250.00
Quick Info :
Perfect for experimentation and prototype work
Brings all 9 pins of a DB9 connector to screw terminal blocks
Adapter used for communication debug
9 pcs signal line was all lead out, name and number clearly labeled;
Rs 290.00
Quick Info :
Type: DB9 Male Connector Breakout Board
Terminals: 9 screw terminals (labeled)
Standards: RS232, RS485, RS422 compatible
Wire: 16-26 AWG
Use: Serial communication, PLC, industrial automation, testing
Rs 290.00Rs 350.00
Quick Info :
Input Voltage: 12V DC
Relay Max Load: 10A
Frequency: 433MHz RF
Modes: 4 Modes (Toggle, Momentary, Latching, Delay)
Use: Remote Automation (Lights, Pumps, Gates)
Rs 1,100.00Rs 1,350.00
Quick Info :
Type: PWM Motor Speed Controller
Voltage: 6-90V DC
Current: 15A Max
Control: Potentiometer
Protection: Overcurrent & Thermal
Rs 1,250.00Rs 1,550.00
Quick Info :
Module Size: 2.8cm * 1.3cm
Applicable connector: 5.5 * 2.1mm
Power output interface: 2 channel VCC, 2 channel GND
Net Weight: 3.2g
Rs 100.00
Quick Info :
Size: 48mm x 29mm x 26mm.
Display color: Red & Blue LED (dual display).
Display: 0.28″ LED digital.
Operating voltage: DC 4.5 ~ 30V.
Measure voltage: DC 0 ~ 100V.
Measure current: 10A (direct measurement, built-in shunt).
Rs 950.00Rs 1,100.00
Quick Info :
Input Voltage: 6 ~ 27V
Driver: Dual BTS7960 H Bridge Configuration
Peak current: 43-Amp
Rs 1,190.00Rs 1,490.00
Quick Info :
Max. Operating Voltage: 45 V
Min. Operating Voltage: 8.2 V
Max. Current Per Phase: 2.5 A
Alternatives for DRV8825 : A4988 , TMC2209
Rs 590.00
Quick Info :
Compatible With: ESP32 & WiFi Modules
Bands: 2.4GHz & 5GHz
Gain: 6dBi
Cable Length: 15cm
Rs 550.00Rs 750.00
Quick Info :
Model: MX1616 Dual Motor Driver
Channels: 2 independent H-bridges
Voltage: 2V – 10V DC
Current: 1.5A continuous per channel
Control: PWM + Direction inputs
Logic: 3.3V/5V compatible
Protection: Over-current, thermal shutdown
Compatible: Arduino, Raspberry Pi, ESP32
Rs 200.00Rs 250.00
Quick Info :
Type: DVI-D ↔ HDMI passive adapter
Direction: Bidirectional
Resolution: Up to 1080p Full HD
Audio: Not supported
Power: None required (passive)
Compatible: PC, Raspberry Pi, monitors, projectors
Signal: Digital video only
Rs 550.00Rs 650.00
Specifications :
Input Voltage: 220V
Maximum Power: 2000W
Adjustable Voltage: 50V-220V
Rs 950.00Rs 1,250.00
Quick Info :
Type: SCR Voltage Regulator
Input Voltage: AC 220V
Max Power: 4000W
Max Current: 20A
Applications: Dimming, Speed Control, Temperature Control
Rs 1,800.00Rs 2,200.00
Quick Info :
Current Rating: 30 A
Input Voltage: 2 – 3S LiPo / 5 – 9 NiMH
Motor Compatibility: 540 / 550 brushed motors
BEC Output: 5 V / 2 A
Rs 1,350.00Rs 1,520.00
Quick Info :
Current Rating: 40A
Battery: 2–6S LiPo
BEC: 5V 3A
Control: Forward / Reverse
Use: RC & Thruster Applications
Rs 3,950.00Rs 4,250.00
Quick Info :
ENC28J60 Ethernet chips, SOP28 package
SPI Interface
Single Supply: +3.3 V
Rs 990.00
Quick Info :
Compatible: ESP-01, ESP-07, ESP-12, ESP32
Interface: USB to Serial (CH340/CP2102)
Power: 3.3V regulated output
Features: Auto-reset, GPIO breakout, boot mode switches
Programming: Arduino IDE, ESP-IDF, MicroPython
Use: ESP development, testing, firmware flashing, IoT projects
Rs 1,350.00Rs 1,450.00
Quick Info :
Type: 44-pin expansion breakout board
Compatible: ESP32-S3 development boards
Terminals: Screw terminal blocks (1→2 expansion)
Spacing: 25.4mm (44-pin)
Size: 80mm x 58mm
No Soldering Required
Rs 850.00Rs 950.00
Quick Info :
802.11 b/g/n
Operating Voltage: 3.3V
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Rs 590.00
Quick info:
Wide Frequency Range – Supports 87.0 MHz to 108.0 MHz for clear FM reception.
High Sensitivity – Low-noise RF input amplifier ensures strong signal reception.
Excellent Audio Quality – 50 Hz to 18 kHz frequency response for crisp sound output.
Compact & Lightweight – Ideal for integration into DIY electronics and audio projects.
Easy to Integrate – Simple pin connections for quick setup in custom applications.
Rs 1,490.00
Quick Info :
Microphone With Bluetooth Transmitter.
Experience seamless audio with wireless technology, ensuring a stable signal for your karaoke sessions.
High Signal-to-Noise Ratio:Enjoy crystal-clear sound with a 70dB signal-to-noise ratio, perfect for professional karaoke performances.
Long Range Receiving Distance.
Rs 3,990.00
Quick Info :
Low Freq. range – 820-960mHz
High Freq. range – 1710-1990mHz
Cable – RF1.13
Connector – I-PEX
Rs 150.00
Quick Info :
Working Voltage : 3.2V to 5.5V DC
Working Current:
Transmitting: 43 mA
Receiving: 19 mA
Sleep Mode: 1.8 mA
Data Interface : UART/TTL (Serial)
Working Temperature : -20°C to +70°C
Rs 1,390.00
Quick Info:
Bluetooth v2.0+EDR
2.4GHz ISM band frequency
Supported baud rate: 9600 (default), 19200,38400, 57600, 115200, 230400, 460800.
Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
Power supply: 3.6V to 6V DC
Rs 1,090.00Rs 1,350.00
Quick Info :
Bluetooth v2.0+EDR
2.4GHz ISM band frequency
Default baudrate: 9600
Power supply: 3.6V to 6V DC
Rs 1,090.00Rs 1,350.00
Quick Info :
Operation Voltage: 2.7V-5V
Operation Current: < 1.5mA
Sample rate: 10Hz
Simultaneous 50 and 60Hz supply rejection
Available Load Cells 5kg, 10kg or 20kg
Rs 290.00
Quick Info :
4mm detection distance with ±10% accuracy
Adjustable sensitivity range: 0-3.8mm
Detects magnetic and non-magnetic metals
Built-in LED indication for switched state
IP67 waterproof protection rating
3-wire connection: VCC, GND, NPN NO output
Rs 690.00
