Skip to content
Quick Info:
Compatible MCUs : STM8 & STM32 Series
Protocols : SWIM, SWD, JTAG
Host Interface : USB 2.0 Type-A
Power Supply : Bus-Powered via USB
Compatible IDEs : STM32CubeIDE, Keil, IAR
Operating System : Windows, Linux, macOS
Rs 690.00Rs 725.00
Quick Info :
WIDE SUPPLY RANGE: 2.0V to 5.5V
PROGRAMMABLE DATA RATE: 8SPS to 860SPS
Rs 650.00Rs 950.00
Quick Info :
Total Resistance : 10KΩ
Wiper Tap Positions : 100
Step Resolution : ~101Ω per Step
Operating Voltage : 3V – 5V DC
Memory Type : Non-Volatile
Rs 640.00Rs 750.00
Quick Info :
Type: DVI-D ↔ HDMI passive adapter
Direction: Bidirectional
Resolution: Up to 1080p Full HD
Audio: Not supported
Power: None required (passive)
Compatible: PC, Raspberry Pi, monitors, projectors
Signal: Digital video only
Rs 550.00Rs 650.00
Quick Info:
Chip : ADUM1201
Channels : 2 (Bidirectional)
Data Rate : DC to 25Mbps
Isolation Voltage : 2500Vrms
Rs 490.00Rs 550.00
Quick Info :
Resolution: 12 -bit (4096 steps)
Interface: I²C
Key Feature: Internal EEPROM
Voltage Range: 2.7V – 5.5 V
Use: Analog Signal Generation
Rs 450.00Rs 490.00
Quick Info :
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00Rs 500.00
Quick Info :
16 bi-directional channels
Can be used as multiplexer or demultiplexer
Channels can handle analog or digital signals
Rs 400.00
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 400.00Rs 590.00
Quick Info :
Interface : RS232 (DB9 female) to TTL
Interface Chip : MAX3232
Supply Voltage : 3.3V to 5V DC
Baud Rate : 300 to 115200 bps
TTL Connection : 4-pin header
Rs 390.00
Quick Info :
Type: Bi-Directional Level Shifter
Channels: 8 Independent
Voltage: 5V ↔ 3.3V
Speed: Up to 400kHz
Applications: I2C, SPI, UART, GPIO
Rs 320.00Rs 450.00
Quick Info :
Type: DB9 Male Connector Breakout Board
Terminals: 9 screw terminals (labeled)
Standards: RS232, RS485, RS422 compatible
Wire: 16-26 AWG
Use: Serial communication, PLC, industrial automation, testing
Rs 290.00Rs 350.00
Quick Info :
Perfect for experimentation and prototype work
Brings all 9 pins of a DB9 connector to screw terminal blocks
Adapter used for communication debug
9 pcs signal line was all lead out, name and number clearly labeled;
Rs 290.00
Quick Info :
IC Chipset : MAX485
Operating Voltage : 5V DC
Communication Standard : RS-485 (EIA-485)
Max Nodes on Bus : 32 Transceivers
Max Communication Distance : Up to 1200m
Rs 200.00Rs 220.00
Quick Info:
IC : TXS0108E
Channels : 8 (all bi-directional, full-duplex)
VCCA (A side) : 1.2V – 3.6V (low voltage)
VCCB (B side) : 1.65V – 5.5V (high voltage)
Max Speed (Push-Pull) : 110Mbps
Max Speed (Open-Drain) : 1.2Mbps
Direction Sensing : Automatic (no DIR pin)
Protocols : UART / SPI / I²C / GPIO / SD card
Pin Pitch : 2.54mm breadboard compatible
Compatible : Arduino / ESP32 / Raspberry Pi / STM32
Rs 180.00Rs 220.00
