Quick Info :
16 bi-directional channels
Can be used as multiplexer or demultiplexer
Channels can handle analog or digital signals
Rs 400.00
Quick Info :
WIDE SUPPLY RANGE: 2.0V to 5.5V
PROGRAMMABLE DATA RATE: 8SPS to 860SPS
Rs 650.00Rs 950.00
Quick Info :
CAN Controller : MCP2515
CAN Transceiver : TJA1050
Operating Voltage: 5V
Interface: SPI
Rs 950.00Rs 1,250.00
Quick Info :
Type: External TV Tuner Box
Connectivity: VGA
Features: PIP function, FM Radio, Built-in Speaker
Compatibility: LCD, LED, and CRT monitors
Rs 6,250.00
Quick Info :
Perfect for experimentation and prototype work
Brings all 9 pins of a DB9 connector to screw terminal blocks
Adapter used for communication debug
9 pcs signal line was all lead out, name and number clearly labeled;
Rs 290.00
Quick Info :
Type: DB9 Male Connector Breakout Board
Terminals: 9 screw terminals (labeled)
Standards: RS232, RS485, RS422 compatible
Wire: 16-26 AWG
Use: Serial communication, PLC, industrial automation, testing
Rs 290.00Rs 350.00
Quick Info :
Module Size: 2.8cm * 1.3cm
Applicable connector: 5.5 * 2.1mm
Power output interface: 2 channel VCC, 2 channel GND
Net Weight: 3.2g
Rs 100.00
Quick Info :
Compatible: ESP-01, ESP-07, ESP-12, ESP32
Interface: USB to Serial (CH340/CP2102)
Power: 3.3V regulated output
Features: Auto-reset, GPIO breakout, boot mode switches
Programming: Arduino IDE, ESP-IDF, MicroPython
Use: ESP development, testing, firmware flashing, IoT projects
Rs 1,350.00Rs 1,450.00
Quick Info :
Compatibility: 30-pin & 38-pin ESP32 boards
Terminals: Screw terminal blocks (3.81mm pitch)
Power: No onboard regulation (uses ESP32 power)
Wire Support: 22-28 AWG
Size: ~75mm x 55mm
Assembly: Plug-and-play design
Mounting: 4 mounting holes included
Rs 750.00Rs 850.00
Quick Info :
Type: 44-pin expansion breakout board
Compatible: ESP32-S3 development boards
Terminals: Screw terminal blocks (1→2 expansion)
Spacing: 25.4mm (44-pin)
Size: 80mm x 58mm
No Soldering Required
Rs 850.00Rs 950.00
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 590.00
Quick Info :
Operation Voltage: 2.7V-5V
Operation Current: < 1.5mA
Sample rate: 10Hz
Simultaneous 50 and 60Hz supply rejection
Available Load Cells 5kg, 10kg or 20kg
Rs 290.00
Quick Info :
4 channels can convert up to 4 logic signals
Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
Bi-directional so can work with bi-directional buses such as I2C
Utilizes N-Ch MOSFET transistors for level translation
Rs 80.00
Quick Info :
Type: Bi-Directional Level Shifter
Channels: 8 Independent
Voltage: 5V ↔ 3.3V
Speed: Up to 400kHz
Applications: I2C, SPI, UART, GPIO
Rs 320.00Rs 450.00
Quick Info :
Working voltage：5V
Connect to 2P terminal on board, for wiring of RS-485 to communicate
Rs 220.00
Quick Info :
Resolution: 12 -bit (4096 steps)
Interface: I²C
Key Feature: Internal EEPROM
Voltage Range: 2.7V – 5.5 V
Use: Analog Signal Generation
Rs 450.00Rs 490.00
Quick Info :
USB Type : Micro USB
Header : 2.54mm
Material : Plastic
Size(L*W) : Approx. 26.06 x 22.93mm
Rs 60.00
