Quick Info :
The working voltage: 5 ~ 12V
Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input).
Maximum output current: >=15mA (5V IN), >=35mA (12V IN)
Rs 250.00Rs 290.00
Quick Info :
Operating voltage : 2.3V – 5.5V
Battery not included
Battery : CR2032
Rs 590.00
Quick Info
Supply voltage (typically): 3.3V
Battery not included
Battery : CR2032
Rs 790.00
Quick Info:
Onboard chip AT24C256 chip
Onboard the I2C communications required pull-up resistor
All pins are leads and marked
PCB board Dimensions : 36.5 (mm) x12 (mm)
Rs 200.00Rs 390.00
Quick Info :
All SD SPI pins output, MOSI, SCK, MISO, and CS.
Support 5V/3.3V input.
This module can handle 2GB SD cards.
Rs 350.00
Quick Info:
Control Interface: GND, VCC, MISO, MOSI, SCK, CS
Size: 45 x 28mm
Net weight: 6g
Rs 350.00
Quick Info :
Acrylic Body.
Easy to install.
Compatible with HC-SR04
Rs 130.00
Quick Info :
Channels : 2
Input release voltage: 3.5 to 5V
Rated load voltage: 100V to 240V AC
Load current: 0.10 to 2A
Rs 750.00Rs 950.00
Quick Info :
Channel : 4
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 560.00Rs 790.00
Quick Info :
Channels : 4
Input release voltage: 3.5 to 5V
Rated load voltage: 100V to 240V AC
Load current: 0.10 to 2A
Rs 1,600.00
Quick Info :
Channel : 1
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 190.00Rs 290.00
Quick Info :
Channels : 1
Input release voltage: 3.5 to 5V
Rated load voltage: 100V to 240V AC
Load current: 0.10 to 2A
Rs 860.00
Quick Info :
Arduino and Raspberry Pi compatible
4-key membrane switch pad has 5 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 285.00
Quick Info :
Arduino and Raspberry Pi compatible
16-key membrane switch pad has 8 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 200.00Rs 290.00
