Quick Info :
Operation Voltage: 2.7V-5V
Operation Current: < 1.5mA
Sample rate: 10Hz
Simultaneous 50 and 60Hz supply rejection
Available Load Cells 5kg, 10kg or 20kg
Rs 290.00
Quick Info:
Type of IGBT Channel: N-Channel
Maximum Power Dissipation (Pc), W: 310
Maximum Collector-Emitter Voltage |Vce|, V: 1200
Collector-Emitter saturation Voltage |Vcesat|, V: 1.48
Maximum Collector Current |Ic|, A: 40
Rs 390.00
Quick Info :
Senses Bus Voltages : 0 V to 36 V
High-Side or Low-Side Sensing
Reports Current, Voltage, and Power
Operates from 2.7-V to 5.5-V Power Supply
Rs 900.00Rs 1,650.00
Quick Info :
Power Supply Voltage : 5V
Size : 27 * 17mm
Communication Type : serial port communication (TTL level)
Rs 650.00
Quick Info :
Working Voltage : 3.3v to 5v
Detectable Distance : 2 ~ 30cm,
Detection angle : 35 °
Comparator chip: LM393
Rs 180.00
Quick Info :
Working voltage: 3.3V~5V
The output form: Digital switching outputs. (0 and 1)
Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00
Quick Info :
Digital Precision : Utilize the digital I2S interface boasting high precision 24-bit data for unparalleled audio quality.Optimal Signal-to-Noise Ratio : Benefit from a remarkable 61 dBA signal-to-noise ratio, ensuring clear and crisp sound reproduction.Enhanced Sensitivity :With a high sensitivity of -26 dBFS, capture audio with precision and clarity.
Rs 1,950.00
Quick Info :
No. of Channels : 2 Channels
Driver Configuration : Half Bridge
Power Switch Type : MOSFET
No. of Pins : 8 Pins
Rs 230.00
Quick Info :
Type of Control Channel: N -Channel
Maximum Power Dissipation (Pd): 150 W
Maximum Drain-Source Voltage |Vds|: 200 V
Maximum Drain Current |Id|: 30 A
Rs 390.00
Quick Info :
N-Channel Power MOSFET
Continuous Drain Current (ID) is 110A when VGS is 10V
Minimum Gate threshold voltage 2V
Drain to Source Breakdown Voltage: 55V
Low On-Resistance of 8.0mΩ
Gate-Source Voltage is (VGS) is ±20V
Rs 190.00
Quick Info :
Voltage: 3.3V, 5V
Output load voltage :0-24V
Output load current: <5A (1A need to add more heat sink)
Rs 250.00
Quick Info :
Transistor Polarity : N
Maximum Drain Source Voltage :100 V
Maximum Continuous Drain Current :27 A
Maximum Gate Source Voltage : ±20V
Power Dissipation : 130 W
Rs 90.00
Specifications :
Transistor type: N-channel
Maximum applied voltage from drain-to-source (VDS): 200 V
Maximum Drain current (continuous) ID: 9 A
Maximum Drain Current (Pulse): 36 A
Maximum Power dissipation: 74 W
Rs 120.00
Quick Info :
Number of Channels : 1 Channel
Transistor Polarity: N-Channel
Drain-Source Breakdown Voltage (Vds) :500V
Continuous Drain Current (Id) :8A
Rs 210.00
Quick Info :
Transistor Polarity : N ChannelDrain Source Voltage Vds : 500VContinuous Drain Current Id : 20AOn Resistance Rds(on) : 0.27ohm
Rs 690.00
Quick Info :
Transistor Polarity : N ChannelDrain Source Voltage Vds : 55VContinuous Drain Current Id : 29AOn Resistance Rds(on) : 0.04ohm
Rs 170.00
Quick Info :
Transistor Polarity : N ChannelDrain Source Voltage Vds : 55VContinuous Drain Current Id : 41AOn Resistance Rds(on) : 0.0175ohm
Rs 160.00
Quick Info :
Connector : Female to Female
1 Cable : Rs. 6
1 Set (40pcs) : Rs. 240
Rs 6.00
Quick Info :
Connector : Female to Female
1 Cable : Rs. 8
1 Set (40pcs) : Rs. 320
Rs 8.00
Quick Info :
Connector : Male to Female
1 Cable : Rs. 6
1 Set (40pcs) : Rs. 240
Rs 6.00
Quick Info :
Connector : Male to Female
1 Cable : Rs. 8
1 Set (40pcs) : Rs. 320
Rs 8.00
Quick Info :
Connector : Male to Male
1 Cable : Rs. 5
1 Set (40pcs) : Rs. 200
Rs 5.00
Quick Info :
Connector : Male to Male
1 Cable : Rs. 6
1 Set (40pcs) : Rs. 240
Rs 6.00
Quick Info :
Connector : Male to Male
1 Cable : Rs. 8
1 Set (40pcs) : Rs. 320
Rs 8.00
Quick Info :
Arduino and Raspberry Pi compatible
16-key membrane switch pad has 8 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 290.00
Quick Info :
Operating Voltage: 5V
Current Consumption: 30-60mA
Frequency: 38kHz
Wavelength: 940nm
Rs 220.00
