Best Seller Items
-
-
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
LED 5mm Bulb Common Anode
Specification:
- 5mm Round Standard Directivity
- Color : Red, Blue, Green, White, Yellow
- UV Resistant : Eproxy
- Forward Current (IF): 30mA
- Forward Voltage (VF): 1.8V to 2.4V
Rs 4.00LED 5mm Bulb Common Anode
Rs 4.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00
-
NEO-6M GPS Module with Active Antenna
Quick Info :
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- Supply voltage: 3.3 V
Rs 1,000.00Rs 1,800.00NEO-6M GPS Module with Active Antenna
Rs 1,000.00Rs 1,800.00 -
CR2032 PCB Mount Battery Holder
Quick Info :
- Battery Supported: CR2032 (3V Coin Cell)
- Mounting Type: PCB Mount (Through Hole)
- Battery Access: Top Entry
Rs 30.00CR2032 PCB Mount Battery Holder
Rs 30.00 -
-
18650 Lithium Battery Charger 2S AC230V
Quick Info :
- Suitable for: 3.7V lithium rechargeable batteries, including 18650
- Input: AC100-240V
- Output: 4.2V/1A * 2
Rs 690.00Rs 790.0018650 Lithium Battery Charger 2S AC230V
Rs 690.00Rs 790.00 -
Micro SD card reader module
Quick Info:
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
Rs 350.00Micro SD card reader module
Rs 350.00 -
-
RGB SMD LED Board Module 5050
Quick Info :
- uses the 5050 full-color LED
- Operating voltage: 5V
- by adjusting the three primary colors can be mixed PWM get different colors
Rs 100.00RGB SMD LED Board Module 5050
Rs 100.00 -
Arduino Pro Mini (Atmega328 5V)
Quick Info :
- Microcontroller: ATmega328
- Board Power Supply: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
- Circuit Operating Voltage: 3.3V or 5V (depending on model)
- Digital I/O Pins: 14
- PWM Pins: 6
Rs 980.00Rs 1,590.00Arduino Pro Mini (Atmega328 5V)
Rs 980.00Rs 1,590.00 -
TCRT5000 Reflective Infrared Optical Sensor
Quick Info :
- Type: Reflective IR Sensor
- Package: 4-Pin Through-hole
- Components: IR LED + Phototransistor
- Optimal Range: 2.5mm
- Wavelength: 950nm
- Use: Line tracking, encoders, proximity
Rs 45.00Rs 50.00TCRT5000 Reflective Infrared Optical Sensor
Rs 45.00Rs 50.00 -
N20 DC Geared Motor Mounting Bracket Kit
Quick Info :
- Motor Type: SPG10 / N20 Gearmotors
- Material: Protective Plastic
- Included: Bracket, Screws, and Nuts
- Feature: Easy Nut Capture Tabs
- Use: Miniature Robotics
Rs 80.00Rs 100.00N20 DC Geared Motor Mounting Bracket Kit
Rs 80.00Rs 100.00 -
Rs 1,100.00
Rs 1,250.00High Speed DC Motor 12VDC – 550
Rs 1,100.00Rs 1,250.00 -
HDMI to Mini HDMI 1M
Quick Info :
- Connector Type: Mini HDMI Male (HDMI C), HDMI Male (HDMI A)
- Length : 1.5 m
Rs 890.00HDMI to Mini HDMI 1M
Rs 890.00 -
Rs 750.00
Rs 800.00Soldering Wire/Lead Reel 0.8mm 50g
Rs 750.00Rs 800.00 -
3.3V Power Supply Module AMS1117
Quick Info :
- Input: DC 4.5V – 12V
- Output: 3.3V, 800mA
- Onboard AMS1117 chip
Rs 150.00 -
MFRC522 RFID Reader Module
Quick Info :
- MFRC522 chip based board
- Operating frequency: 13.56MHz
- Supply Voltage: 3.3V
- Current: 13-26mA
Rs 360.00Rs 430.00MFRC522 RFID Reader Module
Rs 360.00Rs 430.00 -
18650 Li-ion Rechargeable Battery INR18650
Quick Info :
- Brand: Samsung INR18650-25P
- Capacity: 2500mAh (2.5Ah)
- Voltage: 3.6V nominal
- Max Discharge: 10A continuous
- Type: Flat top, no protection
- Use: Battery packs, power tools, e-bikes
Rs 950.00Rs 1,100.0018650 Li-ion Rechargeable Battery INR18650
Rs 950.00Rs 1,100.00 -
PC817 Optocoupler IC
Quick Info :
- Optocoupler Type : Phototransistor Output
- Package : 4-Pin DIP / SMD
- Input Type : Infrared LED
- Output Type : NPN Phototransistor
- Isolation Voltage : 5000V RMS
- Forward Voltage : 1.2V
Rs 20.00PC817 Optocoupler IC
Rs 20.00 -
BC557 PNP Transistor
Quick Info :
- Transistor Type: PNP Bipolar Junction Transistor (BJT)
- Voltage Ratings:
- Collector-Emitter Voltage (Vce): -45V
- Collector-Base Voltage (Vcb): -50V
- Emitter-Base Voltage (Veb): -5V
Rs 10.00BC557 PNP Transistor
Rs 10.00 -
Magnetic Reed Switch 10mm
Quick info:
- Normally Open
- Voltage:
- Switching (VDC-MAX.): 200
- Breakdown (VDC-MIN): 250
- Arc-Quench (VDC-MIN): 200
- Current:
- Switching (AMPERES-MAX.): 0.5
- Carry (AMPERES-MAX.): 1.2
Rs 90.00Magnetic Reed Switch 10mm
Rs 90.00 -
Coin Cell Vibration Motor Module
Quick Info :
- Rated Voltage: 5.0VDC
- Operating Voltage: 3.0-6.0VDC
- Rated Speed: Minimum 9000 rpm
Rs 300.00Coin Cell Vibration Motor Module
Rs 300.00 -
INMP441 MEMS Omnidirectional Microphone Module
Quick Info :
- Digital Precision : Utilize the digital I2S interface boasting high precision 24-bit data for unparalleled audio quality.
- Optimal Signal-to-Noise Ratio: Benefit from a remarkable 61 dBA signal-to-noise ratio, ensuring clear and crisp sound reproduction.
- Enhanced Sensitivity :With a high sensitivity of -26 dBFS, capture audio with precision and clarity.
Rs 1,290.00INMP441 MEMS Omnidirectional Microphone Module
Rs 1,290.00 -
5V Step-Up Power Module Board 134N3P
Quick Info :
- BAT Discharging Stop Voltage: 2.9V.
- Discharging Efficiency:85%(input 3.7V output 5V/1A).
- Charging and discharging indication.
- Internally installed charging and discharging power MOS.
Rs 165.005V Step-Up Power Module Board 134N3P
Rs 165.00 -
4S 40A Li-ion Lithium 18650 Battery BMS Protection Board
Quick Info :
- Capable Lithium battery : 18650, 26650, (Lipo) lithium polymer battery
- Product Size: 46 * 60 * 3.4mm
- Product weight: 10.3g
- Charging voltage: 16.8V – 18.1V
Rs 590.00 -
TCA9548A 1-to-8 I2C 8 Channel IIC Multiple Extensions
Quick Info :
- 1-to-8 Bidirectional Translating Switches.
- Supports Hot Insertion.
- Low Standby Current.
- 1-to-8 Bidirectional Translating Switches.
Rs 490.00 -
TB6600 42/57/86 Stepper Motor Driver Controller
Quick Info :
- Compatible Motors: Nema 17/23/34(42/57/86 Stepper Motor)
- 9V-42V DC power supply;
- H-bridge bipolar constant-phase flow-driven;
- maximum output current of 4.0A eight optional
Rs 1,990.00Rs 2,100.00TB6600 42/57/86 Stepper Motor Driver Controller
Rs 1,990.00Rs 2,100.00 -
-
TL494 Pulse-Width-Modulation Control IC
Quick Info :
- Output Voltage : 40V
- Output Current : 200mA
- Supply Voltage Min : 7V
- Supply Voltage Max : 40V
- Controller IC Case Style : DIP
Rs 60.00 -
MQ-2 Gas Sensor Module for Combustible Gas
Quick Info :
- Operating Voltage is +5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
- Analog output voltage: 0V to 5V
- Digital Output Voltage: 0V or 5V (TTL Logic)
Rs 490.00 -
Keypad Flexible 16 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 16-key membrane switch pad has 8 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 200.00Rs 290.00Keypad Flexible 16 Keys
Rs 200.00Rs 290.00 -
Volume Control Knob AG2 15x17mm
Quick Info :
- Size: 15 mm x 17 mm
- Shaft Hole: 6 mm D-shaft
- Color: Red and Green
- Material: ABS plastic
Rs 30.00Rs 50.00 -
7x7x12mm ON-OFF Self Lock Push Button
Quick Info :
- Type : Self-Lock Push Button
- Operation : ON/OFF
- Pins : 6 (DPDT)
- Rated Voltage : 12 V DC
- Rated Current : 0.5 A
Rs 25.00Rs 55.007x7x12mm ON-OFF Self Lock Push Button
Rs 25.00Rs 55.00 -
N20 Ball Caster Wheel 3PI 15mm
Quick Info :
- Type: Ball Caster Wheel
- Ball Material: 304 Stainless Steel
- Dimensions: 22mm x 15mm
- Weight: 10g
- Application: Mini robots, RC cars
Rs 180.00Rs 250.00N20 Ball Caster Wheel 3PI 15mm
Rs 180.00Rs 250.00 -
Linear Shaft Rod Support 10mm
Quick Info :
- Type : Linear Shaft Rod Support
- Material : Aluminum Alloy / Cast Iron
- Mounting Type : Flange
- Bore Diameter : 10mm
Rs 280.00Linear Shaft Rod Support 10mm
Rs 280.00 -
IC Base 14 pin DIP
Quick Info :
- Type : Dual In-Line Package (DIP) Socket
- Number of Pins : 14
- Body : High-quality thermoplastic
- Pin Pitch : 2.54mm
- Current Rating : ~1A per pin
- Voltage Rating : ~300V AC/DC
Rs 15.00IC Base 14 pin DIP
Rs 15.00
