Best Seller Items
-
-
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00
-
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
MFRC522 RFID Reader Module
Quick Info :
- MFRC522 chip based board
- Operating frequency: 13.56MHz
- Supply Voltage: 3.3V
- Current: 13-26mA
Rs 590.00MFRC522 RFID Reader Module
Rs 590.00 -
DS3231 Real Time Clock Module
Quick Info :
- Operating voltage : 2.3V – 5.5V
- Battery not included
- Battery : CR2032
Rs 590.00DS3231 Real Time Clock Module
Rs 590.00 -
FT232RL USB to TTL Converter
Quick Info :
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
- Integrated +3.3V level converter for USB I/O
- Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 590.00FT232RL USB to TTL Converter
Rs 590.00 -
Rs 580.00
Rs 690.00Stepper Motor 28BYJ-48 5V and ULN2003A Driver Module
Rs 580.00Rs 690.00 -
-
ACS712 5A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 5A
- 5V power supply, on-board power indicator
Rs 550.00ACS712 5A Current Sensor Module
Rs 550.00 -
ACS712 20A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 20A
- 5V power supply, on-board power indicator
Rs 550.00ACS712 20A Current Sensor Module
Rs 550.00 -
Arduino Compatible Sensor Shield
Quick Info :
- Suitable for Arduino UNO and Mega Boards
- IIC, Bluetooth, SD Card Interface
- APC220 wireless RF module communication interface
- RB URF v1.1 ultrasonic sensors interface
- 128 x 64 LCD parallel and 32 servo controller interface
Rs 550.00Arduino Compatible Sensor Shield
Rs 550.00 -
UNO R3 Proto Shield Kit with Mini Breadboard
Quick Info :
- 2 LEDs
- 2 buttons circuit
- 170 mini breadboard
Rs 500.00 -
MAX7219 8-Digit LED Display Drivers
Quick Info :
- No. of Digits : 8
- No. of Segments : 7
- Supply Voltage Min : 4V
- Supply Voltage Max : 5.5V
Rs 495.00MAX7219 8-Digit LED Display Drivers
Rs 495.00 -
Capacitive Touch 8 Pad sensor TTP226
Quick Info :
- On-board TTP226 IC
- On-board 4 road level indicator.
- Working voltage: 2 V to 5.5 V DC
- PCB board size: 47.4 (mm) x 46 (mm)
Rs 495.00Capacitive Touch 8 Pad sensor TTP226
Rs 495.00 -
AHT20+BMP280 Temperature Humidity Pressure
Quick Info :
- Measuring Range (humidity): 0% to 100% RH
- Temperature Range: -40°C to +85°C
- Air pressure range : 300-1100hPa (equi. to +9000 to -500m above sea level)
- Temperature range: -40 to +85 °C
Rs 490.00 -
50N06 N Channel MOSFET
Quick Info :
- Drain Source Voltage (Vdss) : 60V
- Continuous Drain Current (Id) : 60A
- Drain Source On Resistance (RDS(on)@Vgs,Id) : 11mΩ@10V,60A
- Type : N Channel
Rs 490.0050N06 N Channel MOSFET
Rs 490.00 -
AHT10 High Precision Digital Temperature and Humidity Sensor
Quick Info :
- Interface Type: I2C.
- Working voltage: 3.3~5.0V DC.
- Temperature: -40ºC ~ 85ºC.
- Humidity: 0 ~ 100%.
Rs 490.00 -
LY2NJ 12V DC Omron Relay
Quick Info :
- Model No : LY2NJ/HH62P/JQX-13F
- Coil Voltage: 12VDC
- Control Voltage(V) :220VAC
- Contact Structure: DPDT, with LED pilot
- Terminal : 8 pins plug-in type
Rs 490.00LY2NJ 12V DC Omron Relay
Rs 490.00 -
3S 18650 20A Battery Management System BMS
Quick Info:
- Charging Voltage: 12.6V~13.6V
- Continuous Discharge Current (upper limit): 20A
- Continuous Charge Current (upper limit): 10A
Rs 490.00 -
Wire Cutter Nipper 07
Quick Info :
- Material : Steel
- Colour : Blue
- Maximum Cutting Capacity : 0.8mm to 1.2mm
Rs 490.00Wire Cutter Nipper 07
Rs 490.00 -
Project Enclosure 89mm X 65mm X 59mm
Quick Info :
- Dimensions: 89mm X 65mm X 59mm
Rs 490.00Project Enclosure 89mm X 65mm X 59mm
Rs 490.00 -
-
MQ-2 Gas Sensor Module for Combustible Gas
Quick Info :
- Operating Voltage is +5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
- Analog output voltage: 0V to 5V
- Digital Output Voltage: 0V or 5V (TTL Logic)
Rs 490.00 -
MQ-135 Gas Sensor Module for Air Quality
Quick Info :
- Operating Voltage: 2.5V to 5.0V
- Power consumption: 150mA
- Detect/Measure: NH3, Nox, CO2, Alcohol, Benzene, Smoke
- Typical operating Voltage: 5V
Rs 490.00MQ-135 Gas Sensor Module for Air Quality
Rs 490.00 -
MAX30100 Pulse Oximeter and Heart Rate Sensor Module
Quick Info :
- Optical sensor: IR and red LED combined with a photodetector
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- 3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and high-performance analog front
Rs 490.00 -
18650 Lithium Battery Charger 2S AC230V
Quick Info :
- Suitable for: 3.7V lithium rechargeable batteries, including 18650
- Input: AC100-240V
- Output: 4.2V/1A * 2
Rs 490.00Rs 690.0018650 Lithium Battery Charger 2S AC230V
Rs 490.00Rs 690.00 -
-
NRF24L01 2.4GHz Transceiver
QUICK OVERVIEW
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
Rs 490.00NRF24L01 2.4GHz Transceiver
Rs 490.00 -
LCD 16X2 Character Module
Quick Info :
- Operating Voltage is 4.7V to 5.3V
- Current consumption is 1mA without backlight
- Alphanumeric LCD display module, meaning can display alphabets and numbers
- Consists of two rows and each row can print 16 characters.
- Compatible with LCD to I2C Adapter Board
Rs 460.00 – Rs 490.00LCD 16X2 Character Module
Rs 460.00 – Rs 490.00 -
USB2.0 TO TTL SERIAL 6PIN CONVERTER CH340G
Quick Info :
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output. easy to connect to your MCU.
Rs 490.00 -
MT8870 DTMF Voice Module
Quick Info :
- MT8870 Frequency decoder chip
- Onboard 3.5mm input interface
- 5V Input
- Designed to be compatible with standard 2.54mm sockets
Rs 490.00MT8870 DTMF Voice Module
Rs 490.00 -
VHM-314 Bluetooth Audio Receiver Module
Quick Info :
- Voltage: 3.7 – 5V DC
- Bluetooth Version: 5.0 (Backward compatible with Bluetooth 4.2, 4.1, 4.0)
- Transmission Distance: 15m (Visible)
- Audio Decoding: WAV, APE, FLAC, MP3
- Dimensions: 30mm x 30mm
Rs 480.00VHM-314 Bluetooth Audio Receiver Module
Rs 480.00 -
TDA2005 20W Bridge/Stereo Amplifier
Quick Info :
- Operating voltage range: +8 to +18V
- Maximum supply voltage:+28V
- Maximum repetitive current per output: 3.5A
Rs 480.00TDA2005 20W Bridge/Stereo Amplifier
Rs 480.00 -
L298N Motor Driver Module
Quick Info
- Operating Voltage : 5 V to 35 V
- Great for 2 Gear motors
- Compatible Motor and Wheel : DC Gear Motor With Plastic Wheel
Rs 480.00Rs 590.00L298N Motor Driver Module
Rs 480.00Rs 590.00 -
915MHz Spring Antenna for RF95 LORA Module
Quick Info :
Frequency Range(MHz)：915MHz+/-5MHz
Connector Type ：solderingRs 450.00 -
Voltmeter 0-200VDC
Quick info :
Detection Voltage Range DC: 3.5-130V（max）
Rs 450.00Rs 500.00Voltmeter 0-200VDC
Rs 450.00Rs 500.00 -
2SA1941 PNP Bipolar Transistor
Quick Info :
- Transistor Type: PNP
- Collector-Emitter Breakdown Voltage (Vceo): 140V
- Power Dissipation (Pd): 100W
- Collector Current (Ic): 10A
Rs 450.002SA1941 PNP Bipolar Transistor
Rs 450.00