Best Seller Items
-
1K – 100K Potentiometer
Quick Info :
- 1K, 5K, 10K, 50K, 100K Ohm
- Linear taper, carbon film type
- Single-Turn
Rs 30.00 – Rs 100.001K – 100K Potentiometer
Rs 30.00 – Rs 100.00 -
-
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
NodeMCU Wi-Fi Development Board
Quick Info :
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00NodeMCU Wi-Fi Development Board
Rs 1,150.00Rs 1,450.00 -
TP5000 Battery Charging Module
Quick info:
- Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
- Adjustable charging current: 0.5A to 2A (default 1A)
- Embedded switching regulator for efficient charging
- LED indicators: Red (charging), Green (complete)
- Multiple protection circuits: overcurrent, over-discharge, overvoltage
- Compact design with heat dissipation pad
- Easy voltage switching via F solder pad connection
Rs 390.00TP5000 Battery Charging Module
Rs 390.00 -
ESP32 S3 DevKitC-1 N16R8
Quick info:
- N16R8: 16 MB Flash and 8 MB PSRAM.
- Dual-Core Xtensa® LX7 Processor – Runs at up to 240 MHz for high-performance computing.
- Wi-Fi 4 & Bluetooth 5 (LE) – Supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE) for wireless connectivity.
- Dual USB-C Ports:
- One for power and USB-to-UART bridge communication for easy programming.
- One for native USB functionality, supporting USB OTG, device emulation, or USB mass storage applications.
Rs 2,290.00Rs 2,490.00ESP32 S3 DevKitC-1 N16R8
Rs 2,290.00Rs 2,490.00
-
Magnetic Reed Switch 10mm
Quick info:
- Normally Open
- Voltage:
- Switching (VDC-MAX.): 200
- Breakdown (VDC-MIN): 250
- Arc-Quench (VDC-MIN): 200
- Current:
- Switching (AMPERES-MAX.): 0.5
- Carry (AMPERES-MAX.): 1.2
Rs 90.00Magnetic Reed Switch 10mm
Rs 90.00 -
4S 40A Li-ion Lithium 18650 Battery BMS Protection Board
Quick Info :
- Capable Lithium battery : 18650, 26650, (Lipo) lithium polymer battery
- Product Size: 46 * 60 * 3.4mm
- Product weight: 10.3g
- Charging voltage: 16.8V – 18.1V
Rs 590.00 -
Project Enclosure 89mm X 65mm X 59mm
Quick Info :
- Dimensions: 89mm X 65mm X 59mm
Rs 490.00Project Enclosure 89mm X 65mm X 59mm
Rs 490.00 -
-
TL494 Pulse-Width-Modulation Control IC
Quick Info :
- Output Voltage : 40V
- Output Current : 200mA
- Supply Voltage Min : 7V
- Supply Voltage Max : 40V
- Controller IC Case Style : DIP
Rs 60.00 -
L293D Motor Driver IC
Quick Info :
- No. of Outputs : 4 Outputs
- : 1.2A
- : 39V
- : 4.5V
- : 36V
Rs 150.00L293D Motor Driver IC
Rs 150.00 - No. of Outputs : 4 Outputs
-
MQ-2 Gas Sensor Module for Combustible Gas
Quick Info :
- Operating Voltage is +5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
- Analog output voltage: 0V to 5V
- Digital Output Voltage: 0V or 5V (TTL Logic)
Rs 490.00 -
Micro SD card reader module
Quick Info:
- Control Interface: GND, VCC, MISO, MOSI, SCK, CS
- Size: 45 x 28mm
- Net weight: 6g
Rs 350.00Micro SD card reader module
Rs 350.00 -
Arduino Pro Mini (Atmega328 5V)
Quick Info :
- Microcontroller: ATmega328
- Board Power Supply: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
- Circuit Operating Voltage: 3.3V or 5V (depending on model)
- Digital I/O Pins: 14
- PWM Pins: 6
Rs 1,190.00Rs 1,590.00Arduino Pro Mini (Atmega328 5V)
Rs 1,190.00Rs 1,590.00 -
Linear Shaft Rod Support 10mm
Quick Info :
- Type : Linear Shaft Rod Support
- Material : Aluminum Alloy / Cast Iron
- Mounting Type : Flange
- Bore Diameter : 10mm
Rs 280.00Linear Shaft Rod Support 10mm
Rs 280.00 -
Project Enclosure 158mm X 90mm X 46mm
Quick Info :
- Dimensions: 158mm X 90mm X 46mm
Rs 980.00Project Enclosure 158mm X 90mm X 46mm
Rs 980.00 -
Double BTS7960 43A Motor Driver Module
Quick Info :
- Input Voltage: 6 ~ 27V
- Driver: Dual BTS7960 H Bridge Configuration
- Peak current: 43-Amp
Rs 1,490.00Double BTS7960 43A Motor Driver Module
Rs 1,490.00 -
NEO-6M GPS Module with Active Antenna
Quick Info :
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- Supply voltage: 3.3 V
Rs 1,290.00Rs 1,800.00NEO-6M GPS Module with Active Antenna
Rs 1,290.00Rs 1,800.00 -
Flame Sensor Module
Quick Info :
- Operating Voltage : 3.3V ~ 5.5V
- Infrared Wavelength Detection : 760nm ~ 1100nm
- Sensor Detection Angle : 60°
Rs 280.00Flame Sensor Module
Rs 280.00 -
TIP122 NPN Epitaxial Darlington Transistor
Quick Info :
- Transistor Type : NPN – Darlington
- Current – Collector (Ic) (Max) : 5 A
- Voltage – Collector Emitter Breakdown (Max) : 100 V
Rs 40.00 -
-
-
Mini DC 3A Motor PWM Speed Controller
Quick Info :
- Operating Voltage: DC 4.5V-35V
- Control Power: 90W (maximum)
- Size: 30mm x 26mm x 14mm (Without Handle)
Rs 290.00Mini DC 3A Motor PWM Speed Controller
Rs 290.00 -
MFRC522 RFID Reader Module
Quick Info :
- MFRC522 chip based board
- Operating frequency: 13.56MHz
- Supply Voltage: 3.3V
- Current: 13-26mA
Rs 430.00MFRC522 RFID Reader Module
Rs 430.00 -
Keypad Flexible 16 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 16-key membrane switch pad has 8 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 290.00Keypad Flexible 16 Keys
Rs 290.00 -
HX711 Load Cell Amplifier
Quick Info :
- Operation Voltage: 2.7V-5V
- Operation Current: < 1.5mA
- Sample rate: 10Hz
- Simultaneous 50 and 60Hz supply rejection
- Available Load Cells 5kg, 10kg or 20kg
Rs 290.00HX711 Load Cell Amplifier
Rs 290.00 -
PAM8403 3W Audio Amplifier
Quick Info:
- Supply Voltage: 5VDC
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 130.00PAM8403 3W Audio Amplifier
Rs 130.00 -
7404 Hex Inverter Gate
Quick Info:
- Logic Type : Inverter
- Number of Circuits : 6
- Number of Inputs : 1
- Voltage – Supply :4.75V ~ 5.25V
Rs 60.007404 Hex Inverter Gate
Rs 60.00 -
7400 Quad 2-Input NAND Gate
Quick Info:
- Logic Type : NAND Gate
- Number of Circuits : 4
- Number of Inputs : 2
- Voltage – Supply : 4.75V ~ 5.25V
Rs 60.007400 Quad 2-Input NAND Gate
Rs 60.00 -
HDMI to Micro HDMI 1.5m
Quick Info :
- Full HD resolution supports 480i, 480p, 720p, 1080i, and 1080p
- HDMI version 1.4
- Length : 1.5 meters
Rs 790.00HDMI to Micro HDMI 1.5m
Rs 790.00 -
2N5401 PNP Transistor
Quick Info :
- Transistor Type : PNP
- Current – Collector (Ic) (Max) : 600 mA
- Voltage – Collector Emitter Breakdown (Max) : 150 V
Rs 20.002N5401 PNP Transistor
Rs 20.00 -
DHT11 Humidity and Temperature Sensor
Quick Info :
- Working Voltage : 3 to 5V DC
- Humidity Range : 20-80% humidity; ±5% accuracy
- Temperature Range : -20°C to 50°C temperature; ±2°C accuracy
Rs 390.00DHT11 Humidity and Temperature Sensor
Rs 390.00 -
USB2.0 TO TTL SERIAL 6PIN CONVERTER CH340G
Quick Info :
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output. easy to connect to your MCU.
Rs 490.00 -
-
Arduino Uno SMD CH340G Compatible
Quick Info :
- Microcontroller: ATmega328P
- Serial IC : CH340G
- Operating Voltage: 5V
- Input Voltage: 7-12V (recommended 5V)
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- PWM Digital I/O Pins: 6
- Analog Input Pins: 6
Rs 1,200.00 – Rs 1,300.00 -
MAX98357 I2S 3W Amplifier Module
Quick Info :
- Operating voltage: 2.7 – 5.5 V
- The I2S audio input supports 3.3V and 5V levels
- 3.2W output at 10% THD,
- Speaker Spec : 4 Ω impedance of the speaker and 5 V power supply
Rs 790.00MAX98357 I2S 3W Amplifier Module
Rs 790.00 -
Voltage Sensor Module 25V
Quick Info :
- Voltage sensing range – 5v to 25v
- Voltage Analog Resolution: 0.00489V
Rs 150.00Voltage Sensor Module 25V
Rs 150.00