Quick Info :
Input power supply: AC 100-240V, 50-60Hz, 0.4A
Output voltage: DC 12V
Output current: DC 1.6A
Output power: 20W
Dimensions (LxWxH): 57x33x23mm
Rs 2,590.00
Quick Info :
Type : HLK-PM01
Input voltage (AC pins) : 90 – 264V AC (maximum)
Output voltage ( + Vo and -Vo pins) : 5V DC
Maxi. output current : 0.6A (continuous)
Rs 1,090.00
Quick Info :
Power Requirements: 2.7 to 6.5 VDC
Communication Interface: I²C (up to 400 kHz)
Operating temperature: -22 to +185 °F to +85 °C)
Dimensions: 0.73 x .65 in ( 1.8 x 1.7 cm)
Rs 850.00
Quick Info :
Voltage : 110-220v
Glue stick size: 11mm (Large)
On/Off Switch
Rs 1,190.00
Quick info :
Material: Plastic
Colour: Black
No. of Drawers: 33
Rs 4,950.00Rs 5,100.00
Quick Info :
Power Input : 3.0V-5.5V
Up to +26V target voltage
0.1 ohm 1% 2W current sense resistor
Rs 950.00Rs 1,150.00
Quick Info :
Sensing distance : 5mm
Operating voltage : 10 – 30 VDC
Response frequency : 800Hz
Output method : PNP, 150mA load
Rs 690.00
Quick Info :
Type of Control Channel: N -Channel
Maximum Power Dissipation (Pd): 280 W
Maximum Drain-Source Voltage |Vds|: 250 V
Maximum Gate-Source Voltage |Vgs|: 20 V
Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
Maximum Drain Current |Id|: 38 A
Rs 450.00
Quick Info :
Drain Source Voltage (Vdss) : 55V
Continuous Drain Current (Id) : 49A
Power Dissipation (Pd) : 94W
Rs 390.00
Quick Info :
Connector : Female to Female
1 Cable : Rs. 5
1 Set (40pcs) : Rs. 200
Rs 5.00
Quick Info :
Connector : Male to Female
1 Cable : Rs. 5
1 Set (40pcs) : Rs. 200
Rs 5.00
Quick Info :
Connector : Male to Male
1 Cable : Rs. 5
1 Set (40pcs) : Rs. 200
Rs 5.00
Quick Info :
Connector : Male to Male
1 Cable : Rs. 8
1 Set (40pcs) : Rs. 320
Rs 8.00
Quick Info :
12-key membrane switch pad has 7 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 250.00
Quick Info :
Operating Voltage: 5V
5 Push buttons.
Left, Right, Up, Down and Select buttons
Screen contrast adjustment
Arduino Reset button
Rs 595.00
Quick Info :
Operating Voltage is 4.7V to 5.3V
Current consumption is 1mA without backlight
Alphanumeric LCD display module, meaning can display alphabets and numbers
Consists of four rows and each row can print 16 characters.
Compatible with LCD to I2C Adapter Board
Rs 1,390.00
Quick Info :
Interface : I2C
I2C Address : 0x3F
Supply voltage : 5V
Contrast Adjust : Through Potentiometer
Backlight : Blue
Rs 1,100.00
Quick Info :
Interface : I2C
I2C Address : 0x3F
Supply voltage : 5V
Contrast Adjust : Through Potentiometer
Backlight : Blue
Rs 1,490.00
Quick Info :
Operating Voltage: 12V DC
Module Dimensions: 5cm x 2.7cm x 2cm
Sensor: Photosensitive resistance module
Rs 650.00
Quick Info :
10Watt / Cold White
Input(DC): 900mA / 9V-11VDC
Rs 330.00
Quick Info :
50Watt / Cold White
Input(AC): 220VAC
Rs 890.00
Quick Info :
Battery Type : Lithium Polymer (LiPo)
Voltage : 3.7V nominal
Capacity : 1200mAh
Size : 60mm X 25mm
Charging Voltage : 4.2V (fully charged)
Discharge Rate : 1C to 25C
Rs 1,990.00
Quick Info :
Battery Type : Lithium Polymer (LiPo)
Nominal Voltage : 3.7V DC
Capacity : 250mAh
Charging Voltage : 4.2V ± 0.05V
Discharge Cutoff Voltage : ~3.0V
Continuous Discharge Rate : ~1C – 2C
Max Discharge Current : ~250mA – 500mA
Rs 690.00
Quick Info :
Battery Type : Lithium Polymer (LiPo)
Nominal Voltage : 3.7V DC
Capacity : 500mAh
Dimensions : ~25mm x 45mm x 7mm
Charging Voltage : 4.2V ± 0.05V
Discharge Cutoff Voltage : ~3.0V
Rs 890.00
Quick Info :
Input Voltage: 5-35V
Input Voltage Must Be At Least 2V Above Output Voltage
Output Voltage: 1.25-30V (infinitely adjustable)
Constant Current Range: 0-3A (infinitely adjustable)
Rs 690.00
