Best Seller Items
-
Raspberry Pi 4
Quick Info :
- Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model)
- 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
- Gigabit Ethernet
- 2 USB 3.0 ports; 2 USB 2.0 ports.
Rs 23,950.00 – Rs 39,950.00Raspberry Pi 4
Rs 23,950.00 – Rs 39,950.00 -
-
Rework Station 8586D
Quick Info :
- Voltage: 220V / 50Hz
- Power Consumption: 750W (maximum)
- Temperature Range:
- Hot Air Gun: 100°C to 450°C
- Soldering Iron: 200°C to 480°C
- Airflow: Up to 120 liters per minute
- Dimensions: 14.6 x 9 x 13 cm
- Weight: 2.1 kg
Rs 16,500.00Rs 18,500.00Rework Station 8586D
Rs 16,500.00Rs 18,500.00 -
Liquid PH Sensor Module With Electrode Probe
Quick Info :
Liquid pH Value Detection Sensor
- Heating voltage: 5±0.2V
- Working current: 5-10mA
Electrode Probe for Liquid pH Value Detection Sensor Module
- PH range: 0-14 PH
- Temperature range: 0-60℃
Rs 5,990.00Rs 7,100.00Liquid PH Sensor Module With Electrode Probe
Rs 5,990.00Rs 7,100.00 -
AC Rotary Colling Fan 230V 200X200X60MM
Quick Info :
- Model : FP-20060EX S1-B
- Fan Type : Rotary
- Voltage : AC 220-240V
- Dimensions : 200mm x 60mm
- Speed : 3000 RPM
- Current Draw : 0.43A
- Power Consumption : 65W
Rs 4,990.00AC Rotary Colling Fan 230V 200X200X60MM
Rs 4,990.00 -
-
-
LDR Light Sensitive Module with Relay
Quick Info :
- Operating Voltage: 12V DC
- Module Dimensions: 5cm x 2.7cm x 2cm
- Sensor: Photosensitive resistance module
Rs 650.00LDR Light Sensitive Module with Relay
Rs 650.00 -
-
Active GPS Patch Antenna (25*25)
Quick Info :
- Frequency – 1559Mhz-1609Mhz
- Active antenna noise figure < 1.5dB
- Cable – RF1.13
- Connector – I-PEX
Rs 650.00Active GPS Patch Antenna (25*25)
Rs 650.00 -
LM2596 CC/CV Li-Ion Charger/LED Power Supply Module
Quick Info :
- Input Voltage: 5-35V
- Input Voltage Must Be At Least 2V Above Output Voltage
- Output Voltage: 1.25-30V (infinitely adjustable)
- Constant Current Range: 0-3A (infinitely adjustable)
Rs 690.00 -
ATTINY85-20PU Atmel
Quick Info :
- : 20MHz
- : 8KB
- : 512Byte
- : 8 Pins
Rs 690.00ATTINY85-20PU Atmel
Rs 690.00 - : 20MHz
-
-
-
Arduino Compatible XD-204 Data Logger Shield
Quick Info :
- Real Time Clock Module : DS1307
- SD Card reader : standard SD card
- RTC battery included
Rs 690.00 -
Wire Cutter Nipper 12
Quick Info :
- Size (L x B x H) : 15 cm x 5 cm x 2 cm
- Weight : 100 g
- Size : 6 Inch
Rs 690.00Wire Cutter Nipper 12
Rs 690.00 -
-
Inductive Proximity Sensor PNP PL-05P
Quick Info :
- Sensing distance : 5mm
- Operating voltage : 10 – 30 VDC
- Response frequency : 800Hz
- Output method : PNP, 150mA load
Rs 690.00Inductive Proximity Sensor PNP PL-05P
Rs 690.00 -
SN65HVD230 CAN Module
Quick Info :
- Operates with a single 3.3 V Supply
- Bus Pin ESD Protection Exceeds ±16 kV HBM
- High Input Impedance Allows for Up to 120 Nodes on a Bus
Rs 690.00SN65HVD230 CAN Module
Rs 690.00 -
Digital Audio Power Amplifier Module HW-710
Quick info :
- Output Power: 2x50W (stereo mode) or 100W (mono mode)
- Frequency Response: 20Hz to 20kHz
- Signal-to-Noise Ratio (SNR): ≥100dB
- Chip: TPA3116D2
- Power Supply Voltage: 12-24V DC
Rs 690.00 -
LiPo Battery 3.7V 250mA
Quick Info :
- Battery Type : Lithium Polymer (LiPo)
- Nominal Voltage : 3.7V DC
- Capacity : 250mAh
- Charging Voltage : 4.2V ± 0.05V
- Discharge Cutoff Voltage : ~3.0V
- Continuous Discharge Rate : ~1C – 2C
- Max Discharge Current : ~250mA – 500mA
Rs 690.00LiPo Battery 3.7V 250mA
Rs 690.00 -
AC-DC 5V 3A SMPS Micro USB Power Adapter
Quick Info :
- Input Voltage : AC 220 ~ 240V 50/60 HZ
- Output Voltage: DC 5V
- Output Current: 3A
- Output type: Micro USB
Rs 700.00AC-DC 5V 3A SMPS Micro USB Power Adapter
Rs 700.00 -
TCS3200 Color Recognition Sensor Module
Quick Info :
- Single-Supply Operation (2.7V to 5.5V)
- Best Detection Range: 10mm
- High-Resolution Conversion of Light Intensity to Frequency
- Programmable Color and Full-Scale Output Frequency
Rs 750.00TCS3200 Color Recognition Sensor Module
Rs 750.00 -
Bluetooth XBee Shield V3 Module Wireless Control
Quick Info :
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
Rs 750.00 -
3 Channel Line TCRT5000 Tracking Module
Quick Info :
- This infrared sensor trio detector and trio output
- Build-in TCRT5000 sensor
- Number of channels : 3
Rs 750.003 Channel Line TCRT5000 Tracking Module
Rs 750.00 -
GY-BMI160 Module 6DOF 6 Axis Gyroscope
Quick Info :
- Power supply: 3-5v (Recommended 3.3v)
- Communication mode: Standard IIC/SPI communication protocol
- Chip built in AD 16bit converter, 16 bit data output
- Gyro range: ±125 ±250 ±500 ±1000 ±2000 degrees /s
Rs 750.00GY-BMI160 Module 6DOF 6 Axis Gyroscope
Rs 750.00 -
DS1302 Real Time Clock Module
Quick Info
- Supply voltage (typically): 3.3V
- Battery not included
- Battery : CR2032
Rs 790.00DS1302 Real Time Clock Module
Rs 790.00 -
AC-DC 9V 2A SMPS Power Adapter
Specifications :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 9V
- Output Current: 1A
- Plug Type : UK Plug
Rs 790.00AC-DC 9V 2A SMPS Power Adapter
Rs 790.00 -
AS5600 Magnetic Encoder Module V2
Quick Info :
- Supply Voltage : 3-3.6 and 4.5-5.5
- Temperature Range [°C] : -40 to +125
- Output : Analog out / PWM / I²C
- Interface : I²C
- Resolution [bit]: 12
Rs 790.00 -
HMC5883L GY-271 Electronic Compass Module
Quick Info :
- Power Requirements: 2.7 to 6.5 VDC
- Communication Interface: I²C (up to 400 kHz)
- Operating temperature: -22 to +185 °F to +85 °C)
- Dimensions: 0.73 x .65 in ( 1.8 x 1.7 cm)
Rs 850.00 -
Thermoelectric Peltier Cooler TEC1-12706
Quick Info:
- Current : 0A ~ 6A
- Operating Voltage : 0V ~ 15.2V
- Power : 60W
- Temperature Range : -30C to 70C
Rs 850.00Thermoelectric Peltier Cooler TEC1-12706
Rs 850.00 -
-
-
-
LiPo Battery 3.7V 500mA
Quick Info :
- Battery Type : Lithium Polymer (LiPo)
- Nominal Voltage : 3.7V DC
- Capacity : 500mAh
- Dimensions : ~25mm x 45mm x 7mm
- Charging Voltage : 4.2V ± 0.05V
- Discharge Cutoff Voltage : ~3.0V
Rs 890.00LiPo Battery 3.7V 500mA
Rs 890.00 -
MAX7219 8 X 8 LED Dot Matrix Module V2
Quick Info :
- Single 8×8 LED Matrix Display with 1.3″ high bright red display
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
Please note that the Jumper Cables need to be purchased separately
Rs 900.00MAX7219 8 X 8 LED Dot Matrix Module V2
Rs 900.00 -
Wire Pliers / Cutter Bundle Pack
Quick Info :
- 6 ” Diagonal Cutters
- 6 ” Combination Cutters
- 6 ” Needle Nose Wire Cutters
Rs 900.00Wire Pliers / Cutter Bundle Pack
Rs 900.00