Quick Info :
OLED Driver IC: SSD1306
Resolution: 128 x 64
Visual Angle: >160°
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00
Quick Info :
Operating Voltage: 5V
Backlight and Contrast is adjusted by potentiometer
Compatible for 16×2 , 16×4 and 20×4 LCD
Rs 250.00Rs 390.00
Quick Info :
Size: 48mm x 29mm x 26mm.
Display color: Red & Blue LED (dual display).
Display: 0.28″ LED digital.
Operating voltage: DC 4.5 ~ 30V.
Measure voltage: DC 0 ~ 100V.
Measure current: 10A (direct measurement, built-in shunt).
Rs 950.00Rs 1,100.00
Quick Info :
Module Size: 2.8cm * 1.3cm
Applicable connector: 5.5 * 2.1mm
Power output interface: 2 channel VCC, 2 channel GND
Net Weight: 3.2g
Rs 100.00
Quick Info :
USB Type : Micro USB
Header : 2.54mm
Material : Plastic
Size(L*W) : Approx. 26.06 x 22.93mm
Rs 60.00
Quick Info :
Connector Type: USB Type -B
PCB Size: 20 x 20 mm
Weight: 4g
Rs 100.00
Quick Info :
Working voltage：5V
Connect to 2P terminal on board, for wiring of RS-485 to communicate
Rs 220.00
Quick Info :
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
TTL interface output. easy to connect to your MCU.
Rs 490.00
Quick Info :
Chipset: MAX3232
Working Voltage: 3.3V-5.5V
Port: TX RX VCC GND
Rs 390.00
Quick Info :
Fully compliant USB 2.0 standard, backward compatible with USB1.1
Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00
Quick Info :
Simple 3 pin interface to control the resistance
Supply voltage: 3V-5V
Chip: X9C103S
PCB board size: 2.7 * 1.3CM
10K span potentiometer.
Rs 590.00
Quick Info :
Operation Voltage: 2.7V-5V
Operation Current: < 1.5mA
Sample rate: 10Hz
Simultaneous 50 and 60Hz supply rejection
Available Load Cells 5kg, 10kg or 20kg
Rs 290.00
Quick Info :
Standard USB type A male and TTL 5 pin connector.
5 pins for 3.3V, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Rs 790.00
Quick Info :
Option 1 : DB9 Connector
Option 2 : DB9 and DB25 Connectors
Rs 690.00Rs 990.00
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 590.00
Quick Info :
4 channels can convert up to 4 logic signals
Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
Bi-directional so can work with bi-directional buses such as I2C
Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00
Quick Info :
Maximum output power: 3W*2(5V 4Ω)
Built with switch Potentiometer
Rs 320.00
Quick Info :
18 W mono amplifier circuit design
On-board 10K potentiometer for volume adjustment
Operating Voltage Range: 6 V to 12 V
Rs 290.00
Quick Info:
Supply Voltage: 5VDC
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 130.00
Quick Info :
MT8870 Frequency decoder chip
Onboard 3.5mm input interface
5V Input
Designed to be compatible with standard 2.54mm sockets
Rs 490.00
Quick Info :
Microcontroller: ESP8266
Operating Voltage: 3.3V
Input Voltage: 7-12V
Digital I/O Pins (DIO): 16
Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00
Quick Info:
ATmega328P chip
14 digital I/O pins
6 analog input pins,
a USB connection,
A Power barrel jack,
ICSP header and a reset button.
crystal oscillator, serial communication, voltage regulator
Rs 2,190.00Rs 2,590.00
Quick Info :
Suitable for Arduino UNO and Mega Boards
IIC, Bluetooth, SD Card Interface
APC220 wireless RF module communication interface
RB URF v1.1 ultrasonic sensors interface
128 x 64 LCD parallel and 32 servo controller interface
Rs 550.00
Quick Info :
Microcontroller: ATmega328
Board Power Supply: 3.35 -12 V (3.3V model) or 5 – 12 V (5V model)
Circuit Operating Voltage: 3.3V or 5V (depending on model)
Digital I/O Pins: 14
PWM Pins: 6
Rs 1,190.00Rs 1,590.00
Quick Info:
Microcontroller: ATmega328
Operating Voltage: 5 V
Analog I/O Pins: 8
Input Voltage: 7-12 V
Digital I/O Pins: 22
Rs 1,150.00Rs 1,390.00
Quick Info :
Realtek AMB82-Mini IoT AI Camera, Arduino Dev, 1080p Sensor, Multiple IO
Wi-Fi, Bluetooth, 1080p Sensor, H264/H265 Video, Multiple IO, Tensorflow-Lite AI
Equipped with Ultra-Low-Power AI Wi-Fi IP Camera SoC for rapid boot-up and low power consumption
Rs 19,500.00
Quick info :
WiFi controlled: Operated through a smartphone.
MPU6050 IMU for stability control.
All-in-one PCB: No need for additional 3D printed parts.
Easily upgradable: Can incorporate extra features like position hold or height hold using external modules.
Compact and lightweight.
Built-in battery charger.
Built-in USB interface for programming and debugging.
Rs 14,500.00
Quick Info :
Type: True RMS Digital Clamp Meter
Max Current: 600A (AC & DC)
Max Capacitance: 60mF
Safety Features: NCV & Live Wire Test
Extra: Temperature Measurement
Rs 14,500.00Rs 14,800.00
Quick Info :
Type: Hot Air Gun
Power: 2000W
Temperature Range: 50-650°C (two settings)
Application: DIY, Painting, Heating
Rs 4,450.00Rs 4,850.00
Quick Info :
Type: DC Geared Motor
Voltage: 12V DC
Speed: 560 RPM
Torque: 1.5 Kg.Cm
Gearbox: Metal, 30:1 Ratio
Rs 3,400.00Rs 3,750.00
