Best Seller Items
-
-
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00
-
Keypad Flexible 12 Keys
Quick Info :
- 12-key membrane switch pad has 7 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 250.00Keypad Flexible 12 Keys
Rs 250.00 -
RGB SMD LED Board Module 5050
Quick Info :
- uses the 5050 full-color LED
- Operating voltage: 5V
- by adjusting the three primary colors can be mixed PWM get different colors
Rs 100.00RGB SMD LED Board Module 5050
Rs 100.00 -
MAX7219 8 Way Display Module
Quick Info :
- Eight 7-Segment LED Displays with 0.36″ high red digits
- LED displays mounted in sockets
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
- Can daisy-chain multiple modules together for larger displays
Rs 590.00MAX7219 8 Way Display Module
Rs 590.00 -
MAX7219 8 X 8 LED Dot Matrix Module V2
Quick Info :
- Single 8×8 LED Matrix Display with 1.3″ high bright red display
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
Please note that the Jumper Cables need to be purchased separately
Rs 900.00MAX7219 8 X 8 LED Dot Matrix Module V2
Rs 900.00 -
LCD 20×4 Character Module with I2C Adapter
Quick Info :
- Interface : I2C
- I2C Address : 0x3F
- Supply voltage : 5V
- Contrast Adjust : Through Potentiometer
- Backlight : Blue
Rs 1,190.00LCD 20×4 Character Module with I2C Adapter
Rs 1,190.00 -
TM1637 4 Digit LED Display Module
Quick Info :
- Four 7-Segment LED Displays with 0.36″ high red digits
- Built-in TM1637 LED Driver
- 2-wire serial interface for easy hookup to uC
- 3.3 and 5V compatible
Rs 390.00TM1637 4 Digit LED Display Module
Rs 390.00 -
LCD 16X2 Keypad Shield
Quick Info :
- Operating Voltage: 5V
- 5 Push buttons.
- Left, Right, Up, Down and Select buttons
- Screen contrast adjustment
- Arduino Reset button
Rs 595.00LCD 16X2 Keypad Shield
Rs 595.00 -
-
Cascaded MAX7219 4 Way LED Dot Matrix Module
Quick Info :
- A single module can drive a total of 8 * 8 dot matrix overcast
- The module voltage: 5V
- Module Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height)
Rs 1,650.00Cascaded MAX7219 4 Way LED Dot Matrix Module
Rs 1,650.00 -
DC Power Adapter Board
Quick Info :
- Module Size: 2.8cm * 1.3cm
- Applicable connector: 5.5 * 2.1mm
- Power output interface: 2 channel VCC, 2 channel GND
- Net Weight: 3.2g
Rs 100.00DC Power Adapter Board
Rs 100.00 -
USB to ESP8266 WIFI Module Adapter Board
Quick Info :
Rs 460.00USB to ESP8266 WIFI Module Adapter Board
Rs 460.00 -
X9C103S Digital Potentiometer Module
Quick Info :
- Simple 3 pin interface to control the resistance
- Supply voltage: 3V-5V
- Chip: X9C103S
- PCB board size: 2.7 * 1.3CM
- 10K span potentiometer.
Rs 590.00X9C103S Digital Potentiometer Module
Rs 590.00 -
USB to Serial RS232 Adapter
Quick Info :
- Option 1 : DB9 Connector
- Option 2 : DB9 and DB25 Connectors
Rs 850.00 – Rs 990.00 -
-
OV7670 Camera Module
Quick Info :
- Resolution 640×480 VGA
- Flicker (50/60 Hz) auto detection
- Onboard regulator, only single 3.3V supply needed
Rs 590.00Rs 925.00OV7670 Camera Module
Rs 590.00Rs 925.00 -
TDA7297 15+15W Dual Bridge Amplifier Module
Quick Info:
- Working voltage: 6 to 18V
- Dual channel 15W+15W
- on-board dial potentiometer
Rs 590.00 -
PAM8406 5W Audio Amplifier
Quick Info :
- 5W Output at 10% (Total Harmonic Distortion) THD with a 2Ω Load and 5V Power Supply at Class-D Mode
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 550.00PAM8406 5W Audio Amplifier
Rs 550.00 -
ATtiny85 Development Board
Quick Info:
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source
- Onboard 5V Regulator
- 6 I/O Pins
Rs 450.00ATtiny85 Development Board
Rs 450.00 -
Arduino Compatible Mega 2560 With USB Cable
Quick Info :
- Microcontroller : ATmega2560
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 54 (of which 15 provide PWM output)
- Analog Input Pins : 16
Rs 6,100.00Arduino Compatible Mega 2560 With USB Cable
Rs 6,100.00 -
Arduino Compatible LilyPad
Quick Info :
- Microcontroller: ATMega32u4
- Operating Voltage: 3.3V
- Digital I/O pins: 9 (4 PWM)
- Analog Input Pins: 4
Rs 1,850.00Arduino Compatible LilyPad
Rs 1,850.00