Best Seller Items
-
-
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
LED 5mm Bulb Common Anode
Specification:
- 5mm Round Standard Directivity
- Color : Red, Blue, Green, White, Yellow
- UV Resistant : Eproxy
- Forward Current (IF): 30mA
- Forward Voltage (VF): 1.8V to 2.4V
Rs 4.00LED 5mm Bulb Common Anode
Rs 4.00
-
AHT10 High Precision Digital Temperature and Humidity Sensor
Quick Info :
- Interface Type: I2C.
- Working voltage: 3.3~5.0V DC.
- Temperature: -40ºC ~ 85ºC.
- Humidity: 0 ~ 100%.
Rs 490.00 -
-
-
Alphatronic Raspberry Pi Pico Starter Kit V1
Quick Info :
- Microcontroller : Raspberry Pi Pico
- Modules : Ultrasonic, Servo, Sound sensors
- Breadboard, Jumpers Wires and many more
Rs 6,475.00Alphatronic Raspberry Pi Pico Starter Kit V1
Rs 6,475.00 -
Analog Hall Effect Sensor Module
Quick Info :
- Operating Voltage: 5V DC
- Current Draw: 8mA
- Dimensions: 18 x 15 x 5 mm (L x W x H)
Rs 290.00Analog Hall Effect Sensor Module
Rs 290.00 -
Analog TDS Sensor Module
Quick Info :
- Wide voltage operation :3.3 ~ 5.5 V
- Operating current: 3-6mA
- Measuring Range：0-1000ppm
Rs 2,900.00Analog TDS Sensor Module
Rs 2,900.00 -
Arduino Compatible ADK USB Host Shield
Quick Info :
- Works with standard (dual 5/3.3V) and 3.3V-only
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers and external hard drives
Rs 1,990.00Arduino Compatible ADK USB Host Shield
Rs 1,990.00 -
Arduino Compatible Leonardo
Quick Info :
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
Rs 2,990.00Arduino Compatible Leonardo
Rs 2,990.00 -
Arduino Compatible LilyPad
Quick Info :
- Microcontroller: ATMega32u4
- Operating Voltage: 3.3V
- Digital I/O pins: 9 (4 PWM)
- Analog Input Pins: 4
Rs 1,850.00Arduino Compatible LilyPad
Rs 1,850.00 -
Arduino Compatible Mega 2560 CH340G Normal
Quick Info :
- CH340G replace the Atmega 16U2
- Microcontroller: ATmega2560
- Analog Input Pins: 16
- Digital I/O Pins: 54 (of which 14 provide PWM output)
Rs 4,890.00Arduino Compatible Mega 2560 CH340G Normal
Rs 4,890.00 -
Arduino Compatible Mega 2560 With USB Cable
Quick Info :
- Microcontroller : ATmega2560
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 54 (of which 15 provide PWM output)
- Analog Input Pins : 16
Rs 6,100.00Arduino Compatible Mega 2560 With USB Cable
Rs 6,100.00 -
Arduino Compatible Pro Micro
Quick Info :
Specifications:
- Microcontroller : ATmega32U4
- Operating Voltage : 5V
- Digital I/O Pins : 20
- PWM Channels : 7
- Analog Input Channels : 12
Rs 1,250.00Arduino Compatible Pro Micro
Rs 1,250.00 -
Arduino Compatible Sensor Shield
Quick Info :
- Suitable for Arduino UNO and Mega Boards
- IIC, Bluetooth, SD Card Interface
- APC220 wireless RF module communication interface
- RB URF v1.1 ultrasonic sensors interface
- 128 x 64 LCD parallel and 32 servo controller interface
Rs 550.00Arduino Compatible Sensor Shield
Rs 550.00 -
Arduino Compatible XD-204 Data Logger Shield
Quick Info :
- Real Time Clock Module : DS1307
- SD Card reader : standard SD card
- RTC battery included
Rs 690.00 -
AS5600 Magnetic Encoder Module V2
Quick Info :
- Supply Voltage : 3-3.6 and 4.5-5.5
- Temperature Range [°C] : -40 to +125
- Output : Analog out / PWM / I²C
- Interface : I²C
- Resolution [bit]: 12
Rs 790.00 -
AS608 Fingerprint Reader Sensor Module
Specifications :
- Supply voltage: 3.6 – 6.0VDC
- Operating current: 120mA max
- Peak current: 150mA max
- Fingerprint imaging time: < 1.0 seconds
- Storage capacity: 162 templates
Rs 3,500.00AS608 Fingerprint Reader Sensor Module
Rs 3,500.00 -
AT24C256 I2C interface EEPROM Memory Module
Quick Info:
- Onboard chip AT24C256 chip
- Onboard the I2C communications required pull-up resistor
- All pins are leads and marked
- PCB board Dimensions : 36.5 (mm) x12 (mm)
Rs 390.00 -
ATMEGA328P-PU DIP28
Quick Info :
- High Performance, Low Power Design
- 8-Bit Microcontroller Atmel AVR advanced RISC architecture
- Operating voltage:1.8 – 5.5V
- Operating temperature range:40°C to 85°C
Rs 1,290.00ATMEGA328P-PU DIP28
Rs 1,290.00 -
ATtiny85 Development Board
Quick Info:
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source
- Onboard 5V Regulator
- 6 I/O Pins
Rs 450.00ATtiny85 Development Board
Rs 450.00 -
ATTINY85-20PU Atmel
Quick Info :
- : 20MHz
- : 8KB
- : 512Byte
- : 8 Pins
Rs 690.00ATTINY85-20PU Atmel
Rs 690.00 - : 20MHz
-
Audio Mono Jack Mic 6.5mm Metel Gold
Quick Info :
- Connector Type : Mono Male Jack
- Plug Size : 6.5mm (1/4 inch) diameter
- Number of Conductors : 2
- Plug : Nickel
- Housing : Metal
Rs 200.00Audio Mono Jack Mic 6.5mm Metel Gold
Rs 200.00 -
Black Plastic Box 78X78X35MM C4
Quick Info :
- Material: Constructed from durable ABS plastic
- Dimensions: Measures 78 mm in length, 78 mm in width, and 35 mm in height
- Color: Black
Rs 150.00Black Plastic Box 78X78X35MM C4
Rs 150.00 -
Black Plastic Enclosure Box 86X72X40MM C5
Quick Info :
- Material: Constructed from durable ABS plastic
- Dimensions: Measures 86 mm in length, 72 mm in width, and 40 mm in height
- Color: Black
Rs 140.00 -
Bluetooth XBee Shield V3 Module Wireless Control
Quick Info :
- Stackable design, easy to plug into the ARDUINO development board.
- Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
- Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
Rs 750.00 -
BME680 Temperature, Humidity, Pressure and Gas Sensor
Quick Info :
- Interface: I²C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
- Compatible with 3.3V and 5V Systems
- Gas, humidity, pressure and temperature.
Rs 3,290.00 -
BMP180 Digital Barometric Pressure Sensor
Quick Info :
- Power : 3 to 5VDC
- Pressure sensing range : 300- 1100 h Pa (9000m to -500m above sea level)
- This board/chip uses I2C 7-bit address 0x77.
Rs 450.00 -
-
-
C4560 Dual Operational Amplifier
Quick Info :
- Model : C4560
- Package Type : DIP-8 / SOP-8
- Number of Channels : 2
- Supply Voltage : ±2V to ±18V
- Input Offset Voltage : ≤ 2 mV
- Input Bias Current : ≤ 50 nA
Rs 90.00C4560 Dual Operational Amplifier
Rs 90.00 -
Cascaded MAX7219 4 Way LED Dot Matrix Module
Quick Info :
- A single module can drive a total of 8 * 8 dot matrix overcast
- The module voltage: 5V
- Module Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height)
Rs 1,650.00Cascaded MAX7219 4 Way LED Dot Matrix Module
Rs 1,650.00 -
-