Specifications :
Supply voltage: 3.6 – 6.0VDC
Operating current: 120mA max
Peak current: 150mA max
Fingerprint imaging time: < 1.0 seconds
Storage capacity: 162 templates
Rs 3,500.00
Quick Info :
Four 7-Segment LED Displays with 0.36″ high red digits
Built-in TM1637 LED Driver
2-wire serial interface for easy hookup to uC
3.3 and 5V compatible
Rs 390.00
Quick Info :
Works with standard (dual 5/3.3V) and 3.3V-only
Supports HID devices, such as keyboards, mice, joysticks, etc.
Compatible with Mass storage devices, such as USB sticks, memory card readers and external hard drives
Rs 1,990.00
Quick Info:
GY-53 infrared ranging module (VL53L0X + STM32)
Module type: GY-53
Use chip: VL53L0X + STM32
Power supply: 3-5v (low dropout voltage regulator)
Range: 2 meters (dark, long distance mode)
Rs 2,950.00
Quick Info :
Working Voltage : 3 – 5.5V.
The maximum Current : 49mA 5V.
Range : 20cm to 800 cm
Rs 1,550.00
Quick Info :
Supply Voltage: 2.6V to 5.5V
Average active ranging sensor current: 19mA
Interface: I2C
Dimension: 13mm x 11mm
Rs 1,250.00
Quick Info :
Diameter: 12mm
Height: 2mm
Rs 85.00
Quick Info :
Temperature Range : -55°C to +85°C
Wire Interface : 1-wire interface
3.3 and 5V compatible
Rs 350.00
Quick Info :
The current sensor chip : ACS712
Current measuring : up to 30A
5V power supply, on-board power indicator
Rs 550.00
Quick Info :
12-key membrane switch pad has 7 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 250.00
Quick Info :
Option 1 : DB9 Connector
Option 2 : DB9 and DB25 Connectors
Rs 850.00Rs 990.00
Quick Info:
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
Power via USB or External Source
Onboard 5V Regulator
6 I/O Pins
Rs 450.00
Quick Info :
Liquid pH Value Detection Sensor
Heating voltage: 5±0.2V
Working current: 5-10mA
Electrode Probe for Liquid pH Value Detection Sensor Module
PH range: 0-14 PH
Temperature range: 0-60℃
Rs 5,990.00Rs 7,100.00
Quick Info :
240*320 pixels
Suitable for an Uno (Atmega328P) or Mega (Atmega2560) based Arduinos (other chips are not supported)
Dimensions: 72.5 mm x 53 mm
Driver: ILI9320 or ILI9341 (or compatible with one of two)
Rs 2,250.00
Quick Info :
Input: 1-5VDC
Output voltage: 5V
Output Current: 500mA
Rs 390.00
Specifications :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 24V
Output Current: 3A
Plug Type : UK Plug
Rs 1,750.00
Quick Info :
Channels : 1
Input release voltage: 3.5 to 5V
Rated load voltage: 100V to 240V AC
Load current: 0.10 to 2A
Rs 600.00
Quick Info :
Arduino and Raspberry Pi compatible
4-key membrane switch pad has 5 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 285.00
Quick Info :
Suitable for Arduino UNO and Mega Boards
IIC, Bluetooth, SD Card Interface
APC220 wireless RF module communication interface
RB URF v1.1 ultrasonic sensors interface
128 x 64 LCD parallel and 32 servo controller interface
Rs 550.00
Quick Info :
13 programmable GPIOs
Power
Digital interfaces:
Analog interfaces:
Rs 1,490.00
Quick Info :
Operates with a single 3.3 V Supply
Bus Pin ESD Protection Exceeds ±16 kV HBM
High Input Impedance Allows for Up to 120 Nodes on a Bus
Rs 690.00
Quick info :
Material: Plastic
Colour: Black
No. of Drawers: 33
Rs 4,950.00Rs 5,100.00
Quick Info :
Dual-Band 900/ 1800 MHz
GPRS multi-slot class 10/8GPRS mobile station class B
Compliant to GSM phase 2/2+
Recommended Power Supply – 5V 2A
Rs 2,850.00
Quick Info :
CPU Speed : 20MHzProgram Memory Size : 8KBRAM Memory Size : 512ByteNo. of Pins : 8 Pins
Rs 690.00
