No products in the cart.
Best Seller Items
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 6.00Rs 8.00Jumper Wire Male-Male 20cm
Rs 6.00Rs 8.00Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 6.00Rs 8.00Jumper Wire Male-Female 20cm
Rs 6.00Rs 8.00Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 12
- 1 Set (40pcs) : Rs. 480
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 5
- 1 Set (40pcs) : Rs. 200
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00
Active GPS Patch Antenna (25*25)
Quick Info :
- Frequency – 1559Mhz-1609Mhz
- Active antenna noise figure < 1.5dB
- Cable – RF1.13
- Connector – I-PEX
Rs 650.00Active GPS Patch Antenna (25*25)
Rs 650.00ADS1115 16 Bit ADC Module
Quick Info :
- WIDE SUPPLY RANGE: 2.0V to 5.5V
- PROGRAMMABLE DATA RATE: 8SPS to 860SPS
Rs 1,750.00ADS1115 16 Bit ADC Module
Rs 1,750.00ADXL345 3-Axis Accelerometer Module
Quick Info :
- 3V-6V DC Supply Voltage
- On-board LDO Voltage regulator
- Built-in Voltage level convertor (MOSFET based)
- It can be interface with 3.3V or 5V Microcontroller.
Rs 550.00Alphatronic Raspberry Pi Pico Starter Kit V1
Quick Info :
- Microcontroller : Raspberry Pi Pico
- Modules : Ultrasonic, Servo, Sound sensors
- Breadboard, Jumpers Wires and many more
Rs 6,475.00Alphatronic Raspberry Pi Pico Starter Kit V1
Rs 6,475.00Analog Hall Effect Sensor Module
Quick Info :
- Operating Voltage: 5V DC
- Current Draw: 8mA
- Dimensions: 18 x 15 x 5 mm (L x W x H)
Rs 290.00Analog Hall Effect Sensor Module
Rs 290.00Analog TDS Sensor Module
Quick Info :
- Wide voltage operation :3.3 ~ 5.5 V
- Operating current: 3-6mA
- Measuring Range:0-1000ppm
Rs 2,900.00Analog TDS Sensor Module
Rs 2,900.00Arduino Compatible ADK USB Host Shield
Quick Info :
- Works with standard (dual 5/3.3V) and 3.3V-only
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers and external hard drives
Rs 1,990.00Arduino Compatible ADK USB Host Shield
Rs 1,990.00Arduino Compatible Leonardo
Quick Info :
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
Rs 2,990.00Arduino Compatible Leonardo
Rs 2,990.00Arduino Compatible LilyPad
Quick Info :
- Microcontroller: ATMega32u4
- Operating Voltage: 3.3V
- Digital I/O pins: 9 (4 PWM)
- Analog Input Pins: 4
Rs 1,850.00Arduino Compatible LilyPad
Rs 1,850.00Arduino Compatible Mega 2560 CH340G Normal
Quick Info :
- CH340G replace the Atmega 16U2
- Microcontroller: ATmega2560
- Analog Input Pins: 16
- Digital I/O Pins: 54 (of which 14 provide PWM output)
Rs 3,950.00Arduino Compatible Mega 2560 CH340G Normal
Rs 3,950.00Arduino Compatible Mega 2560 With USB Cable
Quick Info :
- Microcontroller : ATmega2560
- Operating Voltage : 5V
- Input Voltage (recommended) : 7-12V
- Input Voltage (limit) : 6-20V
- Digital I/O Pins : 54 (of which 15 provide PWM output)
- Analog Input Pins : 16
Rs 6,100.00Arduino Compatible Mega 2560 With USB Cable
Rs 6,100.00Arduino Compatible Pro Micro
Quick Info :
Specifications:
- Microcontroller : ATmega32U4
- Operating Voltage : 5V
- Digital I/O Pins : 20
- PWM Channels : 7
- Analog Input Channels : 12
Rs 1,250.00Arduino Compatible Pro Micro
Rs 1,250.00AS608 Fingerprint Reader Sensor Module
Specifications :
- Supply voltage: 3.6 – 6.0VDC
- Operating current: 120mA max
- Peak current: 150mA max
- Fingerprint imaging time: < 1.0 seconds
- Storage capacity: 162 templates
Rs 2,850.00AS608 Fingerprint Reader Sensor Module
Rs 2,850.00ATtiny85 Development Board
Quick Info:
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source
- Onboard 5V Regulator
- 6 I/O Pins
Rs 450.00ATtiny85 Development Board
Rs 450.00ATTINY85-20PU Atmel
Quick Info :
- : 20MHz
- : 8KB
- : 512Byte
- : 8 Pins
Rs 690.00ATTINY85-20PU Atmel
Rs 690.00- : 20MHz
BH1750 Ambient Light Sensor
Quick Info :
- Power Supply: 2.4V-3.6V (typically 3.0V)
- Less current consumption: 0.12mA
- Measuring Rang: 1-65535lx
- Communication: I2C bus
Rs 590.00BH1750 Ambient Light Sensor
Rs 590.00BMP180 Digital Barometric Pressure Sensor
Quick Info :
- Power : 3 to 5VDC
- Pressure sensing range : 300- 1100 h Pa (9000m to -500m above sea level)
- This board/chip uses I2C 7-bit address 0x77.
Rs 450.00BYV26C-TAP Avalanche Diode
Quick Info :
- Diode Configuration :Single
- Reverse Voltage (Vr) : 600V
- Forward Voltage (Vf@If) : 2.5V@1A
Rs 90.00BYV26C-TAP Avalanche Diode
Rs 90.00Cascaded MAX7219 4 Way LED Dot Matrix Module
Quick Info :
- A single module can drive a total of 8 * 8 dot matrix overcast
- The module voltage: 5V
- Module Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height)
Rs 1,650.00Cascaded MAX7219 4 Way LED Dot Matrix Module
Rs 1,650.00DB9 Female Screw Terminal to RS232 RS485 Conversion Board
Quick Info :
- Perfect for experimentation and prototype work
- Brings all 9 pins of a DB9 connector to screw terminal blocks
- Adapter used for communication debug
- 9 pcs signal line was all lead out, name and number clearly labeled;
Rs 290.00