Best Seller Items
-
1K – 100K Potentiometer
Quick Info :
- 1K, 5K, 10K, 50K, 100K Ohm
- Linear taper, carbon film type
- Single-Turn
Rs 30.00 – Rs 100.001K – 100K Potentiometer
Rs 30.00 – Rs 100.00 -
-
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
NodeMCU Wi-Fi Development Board
Quick Info :
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00NodeMCU Wi-Fi Development Board
Rs 1,150.00Rs 1,450.00 -
ESP32 S3 WROOM DEVKITC
Quick info:
- Dual-Core Xtensa® LX7 Processor – Runs at up to 240 MHz for high-performance computing.
- Wi-Fi 4 & Bluetooth 5 (LE) – Supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE) for wireless connectivity.
- USB OTG (Full-Speed) – Built-in USB 1.1 OTG for flashing, communication, and JTAG debugging.
Rs 2,290.00Rs 2,490.00ESP32 S3 WROOM DEVKITC
Rs 2,290.00Rs 2,490.00 -
BMS 3S 40A Li-ion Battery Protection Board
Quick info :
- Applicable voltage: 12V
- Charge current: 20A (Max)
- Discharge current: 40A
- Overdischarge protection voltage: 2.5V ± 0.05V per cell
- Overcharge protection voltage: 4.25V ± 0.05V per cell
Rs 590.00
-
TPA3116D2 50Wx2+100W Digital Subwoofer Amplifier
Quick info :
- Input Type: Analog
- Operating voltage: DC12-24V
- Output power: 50w*2+100w subwoofer*1
- Output load : 4-8Ω
Rs 2,990.00TPA3116D2 50Wx2+100W Digital Subwoofer Amplifier
Rs 2,990.00 -
TT Gear Motor
Quick Info :
- Name: TT motor
- Type: 1:48
- Speed: 45±10%r/min 90±10%r/min
- Rated voltage: 3V/6V
Rs 200.00TT Gear Motor
Rs 200.00 -
TTP223 Red Capacitive Touch Sensor Module
Quick info :
- Model: TTP223.
- Dimensions: 15mm x 11mm.
- Input Voltage: 2 Volt – 5.5 Volts DC.
Rs 60.00 -
Turbidity Sensor Detection Module Kit
Specifications:
- Working Voltage: DC5V
- Working Current: 30mA(MAX)
- Response Time: <500mS
- Insulation Resistance: 100M¦¸(Min)
Rs 4,350.00Turbidity Sensor Detection Module Kit
Rs 4,350.00 -
-
Type C BMS 3S 2A Lithium Battery Charge Module
Quick info :
- Input voltage: DC 3-6V(Recommend DC 3.7V 5V)
- Input current: 2A (2A Version)
- Charging voltage: 12.6V
- Charging current: 0.74A (2A Version)
- USB : TYPE – C
Rs 1,290.00Type C BMS 3S 2A Lithium Battery Charge Module
Rs 1,290.00 -
UDN2981A 8-Channel Source Drivers
Quick Info :
- Switch Type : General Purpose
- Number of Outputs : 8
- Output Configuration : High Side
- Output Type : Bipolar
- Voltage – Load : 5V ~ 50V
- Current – Output (Max) : 500mA
Rs 180.00UDN2981A 8-Channel Source Drivers
Rs 180.00 -
ULN2003 Stepper Motor Driver Board Module
Quick Info :
- High Voltage Outputs: 50V
- Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
- Relay Driver Applications
Rs 230.00Rs 390.00ULN2003 Stepper Motor Driver Board Module
Rs 230.00Rs 390.00 -
ULN2803A Darlington Transistor Array IC
Quick Info:
- Transistor Type : 8 NPN Darlington
- Current – Collector (Ic) (Max) : 500mA
- Voltage – Collector Emitter Breakdown (Max) : 50V
Rs 95.00 -
-
Ultrasonic Mist Maker (113kHz 20mm)
Quick info:
- Diameter:20mm
- Operating Voltage:3.7-12V
- Frequency:113+/-3KHz
Rs 1,690.00Ultrasonic Mist Maker (113kHz 20mm)
Rs 1,690.00 -
-
UNO R3 Proto Shield Kit with Mini Breadboard
Quick Info :
- 2 LEDs
- 2 buttons circuit
- 170 mini breadboard
Rs 500.00 -
USB A 2.0 Male to Female Cable 1.5m
Quick Info :
- Type : USB A 2.0 Male and Female
- Cable Length : 1.5m
Rs 390.00USB A 2.0 Male to Female Cable 1.5m
Rs 390.00 -
-
-
USB Male Head to DIP 4 Pin
Quick Info :
- Dimensions : 31mm X 15mm X 5mm / 1.22 X 0.59 X 0.19 inch
Rs 100.00USB Male Head to DIP 4 Pin
Rs 100.00 -
USB Male to Male Cable 30cm
Quick Info :
- Type : USB A 2.0 Male and Male
- Cable Length : 15cm
Rs 220.00USB Male to Male Cable 30cm
Rs 220.00 -
USB to RS485 Converter Adapter
Quick Info :
- Fully compliant USB 2.0 standard, backward compatible with USB1.1
- Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive
- Supports Plug, Play and hot-swap ( USB side) ;
Rs 450.00USB to RS485 Converter Adapter
Rs 450.00 -
USB to TTL Converter CP2102 (5 Pin)
Quick Info :
- Standard USB type A male and TTL 5 pin connector.
- 5 pins for 3.3V, TXD, RXD, GND & 5V.
- Baud rates: 300 bps to 1.5 Mbps
Rs 790.00USB to TTL Converter CP2102 (5 Pin)
Rs 790.00 -
USB Type B to DIP Converter Module
Quick Info :
- Connector Type: USB Type -B
- PCB Size: 20 x 20 mm
- Weight: 4g
Rs 100.00USB Type B to DIP Converter Module
Rs 100.00 -
USB Type C To 3.5mm
Quick Info :
- Color: Red
- Size: 10.5*5.5*90mm
- Cable Plug: 3.5mm jack, Type C
- Wire Core: Copper
Rs 990.00USB Type C To 3.5mm
Rs 990.00 -
USB2.0 TO TTL SERIAL 6PIN CONVERTER CH340G
Quick Info :
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output. easy to connect to your MCU.
Rs 490.00 -
-
Vero Board
Specifications :
- Available Sizes :
- 7 x 9 cm
- 14.5 X 6.5 cm
- 21 x 10 cm
Rs 100.00 – Rs 180.00Vero Board
Rs 100.00 – Rs 180.00 - Available Sizes :
-
-
-
VHM-314 Bluetooth Audio Receiver Module
Quick Info :
- Voltage: 3.7 – 5V DC
- Bluetooth Version: 5.0 (Backward compatible with Bluetooth 4.2, 4.1, 4.0)
- Transmission Distance: 15m (Visible)
- Audio Decoding: WAV, APE, FLAC, MP3
- Dimensions: 30mm x 30mm
Rs 480.00VHM-314 Bluetooth Audio Receiver Module
Rs 480.00 -
Vibration SW-18010P Sensor Module
Quick Info :
- Working voltage : 3.3V ~ 5V
- Output type: Digital switching output (0 and 1)
- Wide voltage : comparator LM393
Rs 220.00Vibration SW-18010P Sensor Module
Rs 220.00 -
Voltage Sensor Module 25V
Quick Info :
- Voltage sensing range – 5v to 25v
- Voltage Analog Resolution: 0.00489V
Rs 150.00Voltage Sensor Module 25V
Rs 150.00 -
Voltmeter 0-200VDC
Quick info :
Detection Voltage Range DC: 3.5-130V（max）
Rs 450.00Rs 500.00Voltmeter 0-200VDC
Rs 450.00Rs 500.00 -
-
W1209 Digital Temperature Controller Module
Quick Info :
- Temperature range: -50 -110°C
- Dimensions: 48.5 * 40mm
- Temperature control mode: ON / OFF
- Control accuracy: 0.1 °C
- Output voltage: DC 12V
Rs 750.00 -
W3001 220V Temperature Controller
Quick Info :
- Temperature measurement and programming range: -50°C …110°C
- Measurement accuracy: 0.1°C in the range from -9.9°C to 99.9°C; or 1.0°C outside this range
- Control accuracy: 0.1°C 0.1°C in the range -9.9°C to 99.9°C; or 1.0°C outside this range
- Hysteresis accuracy: 0.1°C
- Reading update time: 0.5 seconds
- Supply voltage, V: 110-220 AC
Rs 890.00W3001 220V Temperature Controller
Rs 890.00 -
W5100 Arduino Compatible Ethernet Shield
Quick Info :
- Operating voltage:5V (supplied from the Arduino Board)
- Ethernet Controller: W5500 with internal 32K buffer
- Connection speed: 10/100Mb
- Connection with Arduino on SPI port
Rs 4,390.00W5100 Arduino Compatible Ethernet Shield
Rs 4,390.00