Best Seller Items
-
1K – 100K Potentiometer
Quick Info :
- 1K, 5K, 10K, 50K, 100K Ohm
- Linear taper, carbon film type
- Single-Turn
Rs 30.00 – Rs 100.001K – 100K Potentiometer
Rs 30.00 – Rs 100.00 -
-
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
NodeMCU Wi-Fi Development Board
Quick Info :
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00NodeMCU Wi-Fi Development Board
Rs 1,150.00Rs 1,450.00 -
ESP32 S3 WROOM DEVKITC
Quick info:
- Dual-Core Xtensa® LX7 Processor – Runs at up to 240 MHz for high-performance computing.
- Wi-Fi 4 & Bluetooth 5 (LE) – Supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE) for wireless connectivity.
- USB OTG (Full-Speed) – Built-in USB 1.1 OTG for flashing, communication, and JTAG debugging.
Rs 2,290.00Rs 2,490.00ESP32 S3 WROOM DEVKITC
Rs 2,290.00Rs 2,490.00 -
BMS 3S 40A Li-ion Battery Protection Board
Quick info :
- Applicable voltage: 12V
- Charge current: 20A (Max)
- Discharge current: 40A
- Overdischarge protection voltage: 2.5V ± 0.05V per cell
- Overcharge protection voltage: 4.25V ± 0.05V per cell
Rs 590.00
-
OLED 128X64 0.96 inch Display Module
Quick Info :
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00OLED 128X64 0.96 inch Display Module
Rs 750.00Rs 990.00 -
PAM8403 3W Audio Amplifier
Quick Info:
- Supply Voltage: 5VDC
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 190.00PAM8403 3W Audio Amplifier
Rs 190.00 -
PAM8403 Mini 5V Digital Amplifier Board
Quick Info :
- Maximum output power: 3W*2(5V 4Ω)
- Built with switch Potentiometer
Rs 320.00PAM8403 Mini 5V Digital Amplifier Board
Rs 320.00 -
PAM8610 15Wx2 Stereo Audio Amplifier Board
Quick Info :
- Main Chip: PAM8610
- Power Range: DC 6V-15V (self-protection)
- Recommended Voltage: DC 12V(2A)
- Output Power: 10Wx2(8Ω) 15Wx2(4Ω)
Rs 490.00 -
PH Sensor Test Pen
Quick Info :
- Measure range : 0.00-14.00 pH
- Resolution : 0.01 pH
- Accuracy : +/- 0.01 pH
Rs 2,790.00PH Sensor Test Pen
Rs 2,790.00 -
PIC16F877A Microcontroller
Quick info :
- Enhanced 8-bit RISC CPU
- 256 bytes of EEPROM data memory
- 33 I/O pins for versatile connectivity
- Integrated ADC module for analog sensing
- Flexible USART, SPI, and I2C communication interfaces
Rs 1,690.00PIC16F877A Microcontroller
Rs 1,690.00 -
Piezo Plate 27mm / 35 mm
Quick Info :
- Available sizes : 27MM & 35MM
Rs 45.00 – Rs 95.00 -
PJ-324M Stereo Female Jack 5 Pin PCB 3.5mm
Quick Info :
- 3.5mm Stereo Socket
- PJ-324M
- PCB or Panel Mount : 5 Pin
Rs 50.00 -
Plastic Wheel + Gear Motor
Quick Info :
- Name: TT motor
- Type: 1:48
- Speed: 45±10%r/min 90±10%r/min
- Rated voltage: 3V/6V
Rs 350.00Plastic Wheel + Gear Motor
Rs 350.00 -
Plastic Wheel for TT Gear Motor
Quick Info :
- Wheel diameter: 65mm
- Wheel thickness: 28mm
- Weight : 40g
Rs 100.00Rs 140.00Plastic Wheel for TT Gear Motor
Rs 100.00Rs 140.00 -
Precision Screw Driver Set 7 Pcs SW-993
Quick info :
Bit pattern:
“+” (Phillips) – 1.5 mm: This represents a Phillips head screwdriver bit, typically used for cross-head screws.
“-” (Flathead) – 2.5 mm: This indicates a flathead (slotted) screwdriver bit, used for straight slotted screws.
“★” (Torx) – 0.8 mm: This represents a Torx screwdriver bit, used for star-shaped screw heads, commonly found in electronics.
“Y” (Tri-Wing) – 0.6 mm: This denotes a Tri-Wing screwdriver bit, often used for specialized screws in electronic devices like gaming consoles.Rs 690.00Precision Screw Driver Set 7 Pcs SW-993
Rs 690.00 -
Project Enclosure 115mm X 90mm X 55mm
Quick Info :
- Dimensions: 115mm X 90mm X 55mm
Rs 690.00Project Enclosure 115mm X 90mm X 55mm
Rs 690.00 -
Project Enclosure 158mm X 90mm X 46mm
Quick Info :
- Dimensions: 158mm X 90mm X 46mm
Rs 980.00Project Enclosure 158mm X 90mm X 46mm
Rs 980.00 -
Project Enclosure 230mm X 150mm X 80mm
Quick Info :
- Dimensions: 225mm X 145mm X 80mm
Rs 2,190.00Project Enclosure 230mm X 150mm X 80mm
Rs 2,190.00 -
Project Enclosure 80mm X 80mm X 60mm
Quick Info :
- Dimensions: 80mm X 80mm X 60mm
Rs 590.00Project Enclosure 80mm X 80mm X 60mm
Rs 590.00 -
Project Enclosure 89mm X 65mm X 59mm
Quick Info :
- Dimensions: 89mm X 65mm X 59mm
Rs 490.00Project Enclosure 89mm X 65mm X 59mm
Rs 490.00 -
Pulse & Heart Rate Sensor Module
Quick Info :
- Biometric Pulse Rate or Heart Rate detecting sensor
- Plug and Play type sensor
- Operating Voltage: +5V or +3.3V
- Current Consumption: 4mA
Rs 690.00Pulse & Heart Rate Sensor Module
Rs 690.00 -
PWM DC 6V – 28V 3A Motor Speed Controller
Quick Info :
- Input supply voltage: 6V-28VDC
- The maximum output power: 80W
- The maximum continuous output current : 3A
Rs 450.00 -
Rain Drop Sensor Module
Quick Info
- Working voltage : 5V
- Output format : Digital switching output (0 and 1), and analog voltage output AO
- Potentiometer adjust the sensitivity
- Uses a wide voltage LM393 comparator
Rs 290.00Rain Drop Sensor Module
Rs 290.00 -
Raspberry Pi 4
Quick Info :
- Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
- 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM (depending on model)
- 2.4 GHz and 5.0 GHz IEEE 802.11ac wireless, Bluetooth 5.0, BLE
- Gigabit Ethernet
- 2 USB 3.0 ports; 2 USB 2.0 ports.
Rs 23,950.00 – Rs 39,950.00Raspberry Pi 4
Rs 23,950.00 – Rs 39,950.00 -
Raspberry Pi Pico W
Quick info :
- RP2040 microcontroller with 2MB of flash memory
- On-board single-band 2.4GHz wireless interfaces (802.11n, Bluetooth 5.2). Support for Bluetooth LE Central and Peripheral roles. Support for Bluetooth Classic
- Dual-core cortex M0+ at up to 133MHz
- 2 × UART, 2 × I2C, 2 × SPI, 16 × PWM channels ◦ 1 × timer with 4 alarms, 1 × real time clock • 2 × programmable I/O (PIO) blocks, 8 state machines in total
Rs 3,250.00Raspberry Pi Pico W
Rs 3,250.00 -
RCA Female PCB Mount
Quick Info :
- Positions: 2/4/6 Way
- Type: Female Socket
Rs 50.00 – Rs 100.00 -
RCA Jack Black Gold
Quick Info :
RCA phono plug with three black bands
Rs 125.00RCA Jack Black Gold
Rs 125.00 -
Rechargeable Battery 9V NiMH
Quick info :
- Brand: MP 6F22
- Voltage: 9V
- Capacity: 300mAH
Rs 1,290.00Rechargeable Battery 9V NiMH
Rs 1,290.00 -
Reed Sensor Module Magnetic Control Switch
Quick info:
- Operating Voltage: 3.3V to 5V DC
- Output format: Digital switching output ( 0 and 1 )
- LEDs indicating output and power
Rs 250.00 -
Reflectance Sensor Array QTR-8RC
Quick Info :
- Dimensions: 2.95″ x 0.5″ x 0.125″ (without header pins installed)
- Operating voltage: 3.3-5.0 V
- Supply current: 100 mA
- Output format: 8 digital I/O-compatible signals that can be read as a timed high pulse
Rs 1,290.00Reflectance Sensor Array QTR-8RC
Rs 1,290.00 -
-
RFID 13.56Mhz Card Empty
Quick Info :
- Credit Card Size, 13.56MHz, 1K Bytes Memory, ISO14443A, Read/Write protect by password, easy to program.
- Compatible with RC522 and PN532 readers.
- White card, card number not printed, No magnetic stripe, no holes. Each card individually packaged.
- Discounts applicable for more than 100 Card
Rs 95.00RFID 13.56Mhz Card Empty
Rs 95.00 -
RFM95 LoRa Module – 915MHz
Quick Info :
Module: RFM95/96
Frequency: 915MHzRs 2,450.00RFM95 LoRa Module – 915MHz
Rs 2,450.00 -
RGB LED 5mm Common Anode
Quick Info :
- RGB Led Common Cathode
- Lens: 5mm Diameter / Diffused / Round
- R:620-625nm / G:515-520nm / B:450-455nm
Rs 15.00RGB LED 5mm Common Anode
Rs 15.00 -
-
RGB Pixel LED Controller Driver WS2811 WS2812 UCS1903
Quick Info :
- Support WS2811 WS2812B LED LED lights. It can’t control SK6812 RGBW and regular RGB LED lights without a driver IC. 300+ color modes include rainbow, wave, breathing, strobing, gradual change, color cycle, comet, static, fading, and chasing. Color-changing speed and brightness are adjustable.
Rs 850.00 -
Rs 350.00
RGB SMD LED 8 Channel Module 5050 WS2812
Rs 350.00 -
-
Rs 1,490.00
RJ45 Network Cable Crimp with Cable Cutter
Rs 1,490.00