Best Seller Items
-
1K – 100K Potentiometer
Quick Info :
- 1K, 5K, 10K, 50K, 100K Ohm
- Linear taper, carbon film type
- Single-Turn
Rs 30.00 – Rs 100.001K – 100K Potentiometer
Rs 30.00 – Rs 100.00 -
-
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
NodeMCU Wi-Fi Development Board
Quick Info :
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00NodeMCU Wi-Fi Development Board
Rs 1,150.00Rs 1,450.00 -
TP5000 Battery Charging Module
Quick info:
- Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
- Adjustable charging current: 0.5A to 2A (default 1A)
- Embedded switching regulator for efficient charging
- LED indicators: Red (charging), Green (complete)
- Multiple protection circuits: overcurrent, over-discharge, overvoltage
- Compact design with heat dissipation pad
- Easy voltage switching via F solder pad connection
Rs 390.00TP5000 Battery Charging Module
Rs 390.00 -
ESP32 S3 DevKitC-1 N16R8
Quick info:
- N16R8: 16 MB Flash and 8 MB PSRAM.
- Dual-Core Xtensa® LX7 Processor – Runs at up to 240 MHz for high-performance computing.
- Wi-Fi 4 & Bluetooth 5 (LE) – Supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE) for wireless connectivity.
- Dual USB-C Ports:
- One for power and USB-to-UART bridge communication for easy programming.
- One for native USB functionality, supporting USB OTG, device emulation, or USB mass storage applications.
Rs 2,290.00Rs 2,490.00ESP32 S3 DevKitC-1 N16R8
Rs 2,290.00Rs 2,490.00
-
TDA2030 Audio Amplifier Module
Quick Info :
- 18 W mono amplifier circuit design
- On-board 10K potentiometer for volume adjustment
- Operating Voltage Range: 6 V to 12 V
Rs 290.00TDA2030 Audio Amplifier Module
Rs 290.00 -
LED Strip White 5050
Quick Info :
- LED Type : SMD 5050
- Color : White
- Length : 5m
- Voltage : 12V
- Beam Angle : 120°
- Waterproof Rating : IP20 (Indoor)
- Installation : Self-adhesive backing or clips for mounting
Rs 285.00LED Strip White 5050
Rs 285.00 -
Keypad Flexible 4 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 4-key membrane switch pad has 5 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 285.00Keypad Flexible 4 Keys
Rs 285.00 -
Linear Shaft Rod Support 10mm
Quick Info :
- Type : Linear Shaft Rod Support
- Material : Aluminum Alloy / Cast Iron
- Mounting Type : Flange
- Bore Diameter : 10mm
Rs 280.00Linear Shaft Rod Support 10mm
Rs 280.00 -
NE555 Adjustable Pulse Frequency Duty Cycle Module Square Wave Signal Generator
Quick Info :
Main chip: NE555
Input Voltage (VCC): 5V-15VDC
Input current:~100MA
Output amplitude: 4.2V V-PP to 11.4V V-PP. (Varies with VCC voltage)Rs 280.00 -
DC Submersible Mini 3-6V Water Pump
Quick Info
- Flow rate – 120l/h
- Max height – 1.1 m
- Voltage – 3 to 6 v
Rs 280.00DC Submersible Mini 3-6V Water Pump
Rs 280.00 -
Flame Sensor Module
Quick Info :
- Operating Voltage : 3.3V ~ 5.5V
- Infrared Wavelength Detection : 760nm ~ 1100nm
- Sensor Detection Angle : 60°
Rs 280.00Flame Sensor Module
Rs 280.00 -
0-100V DC Voltmeter
Quick Info :
- Working current: 20mA
- Operating voltage: 4-35 VDC
- Measurement rate: 200mS /Times
- Display Range : upto 100V
Rs 280.000-100V DC Voltmeter
Rs 280.00 -
-
-
D1047 NPN Transistor
Quick Info :
- Transistor Type NPN
- Package Type : TO-3P
- Collector-Emitter Voltage : 100V
- Collector-Base Voltage : 100V
- Emitter-Base Voltage : 5V
- Collector Current : 12A
Rs 275.00D1047 NPN Transistor
Rs 275.00 -
Body Load Cell 50kg
Quick Info :
- Type : Strain Gauge Load Cell
- Material : Aluminum Alloy
- Capacity : 50kg (Maximum Load)
- Shape : Rectangular
- Rated Output : ~1.0mV/V to 2.0mV/V
- Excitation Voltage : 5V to 12V DC (Recommended 10V)
- Zero Balance : ±0.1mV/V
Rs 260.00Body Load Cell 50kg
Rs 260.00 -
2N3055 NPN Transistor
Quick Info :
- Transistor Type : NPN Power Transistor
- Collector-Emitter Voltage : 60 V
- Collector-Base Voltage : 100 V
- Emitter-Base Voltage : 5 V
- Continuous Collector Current : 15 A
- Peak Collector Current : 30 A
- Power Dissipation : 115 W
Rs 255.002N3055 NPN Transistor
Rs 255.00 -
Reed Sensor Module Magnetic Control Switch
Quick info:
- Operating Voltage: 3.3V to 5V DC
- Output format: Digital switching output ( 0 and 1 )
- LEDs indicating output and power
Rs 250.00 -
Car Automobile Fuse Holder 2-30A
Quick info :
- The fuse holder works with any 2-30 amp blade fuse.
- The structure of the fuse holder provides extra protection against water and dust.
Rs 250.00Car Automobile Fuse Holder 2-30A
Rs 250.00 -
TP5100 Lithium Cell Charging Module
Quick Info :
- Model: TP5100
- Input Supply voltage (V): 5 ~ 18
- Programmable charge current: 0.1 ~ 2 A.
Rs 250.00TP5100 Lithium Cell Charging Module
Rs 250.00 -
Rs 220.00 – Rs 250.00
-
Infrared Speed Sensor Module
Quick Info :
- Working voltage: 3.3V~5V
- The output form: Digital switching outputs. (0 and 1)
- Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00Infrared Speed Sensor Module
Rs 250.00 -
Multimeter Probes – Normal Quality
Quick info:
- Handle Size: 9.5 x 1cm (3.7″ x 0.4″) (L x D)
- Metal Probe Size: 1.6 x 0.2cm (0.6″ x 0.08″) (L x D)
- Total Cable Length: 50cm
- Rated Voltage: 750V
- Current: 7A
- Material: Plastic, Metal
- Color: Red, Black
Rs 250.00Rs 390.00Multimeter Probes – Normal Quality
Rs 250.00Rs 390.00 -
5V 600MA USB Output charger step up Power Module
Quick Info:
- Input voltage: 0.9V – 5V;
- Output voltage: 5V;
- Output Amps : 600mA
Rs 250.00 -
5V USB Output Charger Step-Down Power Module
Quick Info :
- Input voltage: DC 6-24V
- Output voltage: 5.1-5.2V
- Output current: 2A
Rs 250.00 -
IRF520 MOSFET Driver Module
Quick Info :
- Voltage: 3.3V, 5V
- Output load voltage :0-24V
- Output load current: <5A (1A need to add more heat sink)
Rs 250.00IRF520 MOSFET Driver Module
Rs 250.00 -
NRF24L01 2.4GHz Transceiver Adapter Base
Quick Info :
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
Rs 250.00NRF24L01 2.4GHz Transceiver Adapter Base
Rs 250.00 -
1 channel 5V DC Relay Module
Quick Info :
- Channel : 1
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 250.00Rs 390.001 channel 5V DC Relay Module
Rs 250.00Rs 390.00 -
-
NTC Thermistor Module
Quick Info :
- Operating Voltage: 3.3V DC to 5V DC
- Output Current : 15mA
- PCB Size : 32 x 14mm
Rs 240.00NTC Thermistor Module
Rs 240.00 -
IR2153 Half Bridge Driver IC
Quick Info :
- IC Type: Self-Oscillating Half-Bridge Driver
- Operating Voltage Range (Vcc): 10V to 15.6V
- Maximum Supply Voltage (Vcc max): 20V
- Output Driver Voltage: 600V (High-Side & Low-Side)
- Output Peak Current: ±500mA
- Adjustable Oscillator Frequency: Up to 150kHz
Rs 230.00IR2153 Half Bridge Driver IC
Rs 230.00 -
Dual Screw Terminal Block
Quick info :
- Rating: 600V 15A
- Positions: 5, 8, 10, and 12
Rs 120.00 – Rs 230.00 -
IR2155 Self-Oscillating Half Bridge Driver
Quick Info :
- No. of Channels : 2 Channels
- Driver Configuration : Half Bridge
- Power Switch Type : MOSFET
- No. of Pins : 8 Pins
Rs 230.00 -
Soil Hygrometer Humidity Detection Module
Quick Info :
- Operating voltage: 3.3V~5V.
- Adjustable sensitivity (shown in blue digital potentiometer adjustment)
- Dual output mode,analog output more accurate.
- A fixed bolt hole for easy installation.
- With power indicator (red) and digital switching output indicator (green).
Rs 230.00 -
Rain Drop Sensor Module
Quick Info
- Working voltage : 5V
- Output format : Digital switching output (0 and 1), and analog voltage output AO
- Potentiometer adjust the sensitivity
- Uses a wide voltage LM393 comparator
Rs 230.00Rain Drop Sensor Module
Rs 230.00 -
MP1584 Mini 3A DC to DC Step down (Buck) Adjustable Module
Quick Info :
- Input Voltage: 4.5V – 28V
- Output Voltage: 0.8V – 20V
- Output Voltage Adjustment: On-board potentiometer
- Output Current: 1.8A (typical), 3.0A (max).
Rs 230.00 -
ULN2003 Stepper Motor Driver Board Module
Quick Info :
- High Voltage Outputs: 50V
- Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
- Relay Driver Applications
Rs 230.00Rs 390.00ULN2003 Stepper Motor Driver Board Module
Rs 230.00Rs 390.00 -
MJ2955 PNP Power Transistor
Quick Info :
- : PNP
- : 60V
- : 15A
- : 115W
Rs 225.00MJ2955 PNP Power Transistor
Rs 225.00 - : PNP
-
2SD718 Silicon NPN Power Transistor
Quick Info :
- Transistor Type: NPN
- Collector-Emitter Voltage (Vce): 80V
- Collector-Base Voltage (Vcb): 80V
- Emitter-Base Voltage (Veb): 5V
- Collector Current (Ic): 15A (maximum)
- Power Dissipation (Pd): 100W
Rs 220.002SD718 Silicon NPN Power Transistor
Rs 220.00