-
-
Infrared Speed Sensor Module
Quick Info :
- Working voltage: 3.3V~5V
- The output form: Digital switching outputs. (0 and 1)
- Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00Infrared Speed Sensor Module
Rs 250.00 -
INMP441 MEMS Omnidirectional Microphone Module
Quick Info :
- Digital Precision : Utilize the digital I2S interface boasting high precision 24-bit data for unparalleled audio quality.
- Optimal Signal-to-Noise Ratio: Benefit from a remarkable 61 dBA signal-to-noise ratio, ensuring clear and crisp sound reproduction.
- Enhanced Sensitivity :With a high sensitivity of -26 dBFS, capture audio with precision and clarity.
Rs 1,290.00INMP441 MEMS Omnidirectional Microphone Module
Rs 1,290.00 -
IR LED 5mm Receiver 850nm
Quick Info :
- Wavelength Sensitivity : 850nm
- Case Material : Black epoxy for enhanced IR filtering
- Package Type : ,5mm
- Operating Voltage : 2.7V – 5.5V
- Current Consumption : ≤1.5mA (typical)
- Reception Distance : 10m – 30m (depends on model)
- Carrier Frequency : 30kHz – 56kHz
Rs 30.00IR LED 5mm Receiver 850nm
Rs 30.00 -
IR Receiver VS1838B
Quick Info :
- Wavelength Sensitivity : 850nm – 950nm (typically 940nm)
- Operating Voltage : 2.7V – 5.5V
- Current Consumption : ≤1.5mA (typical)
- Reception Distance : 10m – 30m (varies by model)
- Carrier Frequency : 30kHz – 56kHz
Rs 40.00IR Receiver VS1838B
Rs 40.00 -
KY-005 IR Transmitter Module
Quick Info :
- Operating Voltage: 5V
- Current Consumption: 30-60mA
- Frequency: 38kHz
- Wavelength: 940nm
Rs 220.00KY-005 IR Transmitter Module
Rs 220.00 -
KY-008 5mW Laser sensor Module
Quick Info :
- Operating Voltage 5V
- Output Power 5mW
- Wavelength 650nm
- Operating Current less than 40mA
Rs 290.00KY-008 5mW Laser sensor Module
Rs 290.00 -
KY-022 IR Receiver Module
Quick Info :
- Chip type: VS1838B
- Operating Voltage: 3.3V to 5V
- Current Consumption: 1.5mA peak
- Receiving angle: 90 °
- Reception distance: 17m
Rs 220.00KY-022 IR Receiver Module
Rs 220.00 -
LDR Light Sensitive Module
Quick Info :
- Adjustable sensitivity (via blue digital potentiometer adjustment)
- Operating voltage 3.3V-5V
- Output Type : Digital switching outputs (0 and 1) -D0
- Using LM393 comparator chip, stable
Rs 130.00LDR Light Sensitive Module
Rs 130.00 -
LDR Sensor 5mm
Quick Info :
- Dark Resistance : ≥ 1MΩ (at 10 Lux)
- Diameter : 5mm
- Material : Cadmium Sulfide
- Light Resistance : 5kΩ to 20kΩ (at 100 Lux)
- Spectral Peak : ~540 nm
- Power Rating : 100mW
Rs 15.00LDR Sensor 5mm
Rs 15.00 -
LDR Sensor 8mm
Quick Info :
- Power Rating : 100mW
- Operating Voltage : Compatible with 3.3V to 5V systems
- Diameter : 8mm
- Material : Cadmium Sulfide (CdS)
- Dark Resistance : ≥ 1MΩ (at 10 Lux)
- Light Resistance : 5kΩ to 20kΩ (at 100 Lux)
Rs 45.00LDR Sensor 8mm
Rs 45.00 -
Liquid PH Sensor Module With Electrode Probe
Quick Info :
Liquid pH Value Detection Sensor
- Heating voltage: 5±0.2V
- Working current: 5-10mA
Electrode Probe for Liquid pH Value Detection Sensor Module
- PH range: 0-14 PH
- Temperature range: 0-60℃
Rs 5,990.00Rs 7,100.00Liquid PH Sensor Module With Electrode Probe
Rs 5,990.00Rs 7,100.00 -
LM35 Temperature sensor
Quick Info :
- Operating Voltage : 4V to 30V DC
- Output Voltage : 0 mV + (10 mV/°C × Temperature)
- Temperature Range : -55°C to +150°C
- Accuracy : ±0.5°C at 25°C
- Linear Scale Factor : 10 mV/°C
- Response Time : Typically less than 1 second
Rs 140.00LM35 Temperature sensor
Rs 140.00 -
-
Magnetic Reed Switch 10mm
Quick info:
- Normally Open
- Voltage:
- Switching (VDC-MAX.): 200
- Breakdown (VDC-MIN): 250
- Arc-Quench (VDC-MIN): 200
- Current:
- Switching (AMPERES-MAX.): 0.5
- Carry (AMPERES-MAX.): 1.2
Rs 90.00Magnetic Reed Switch 10mm
Rs 90.00 -
MAX30100 Pulse Oximeter and Heart Rate Sensor Module
Quick Info :
- Optical sensor: IR and red LED combined with a photodetector
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- 3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and high-performance analog front
Rs 490.00 -
MAX30102 Pulse Oximeter & Heart-Rate Module
Quick Info :
- LED Peak Wavelength: 660nm/880nm
- LED Supply Voltage: 3.3~5V
- Interface: I2C Interface
- Operating Temperature Range: -40°C to +85°C
Rs 590.00 -
MAX471 Current and Voltage Sensor
Quick Info :
- Test Voltage range: DC3 – 25V (on 5V) or DC3 – 16.5V (on 3.3V)
- Monitors Both Charge and Discharge
- Complete High-Side Current Sensing
- Current Sensing up to 3A
Rs 1,950.00MAX471 Current and Voltage Sensor
Rs 1,950.00 -
MAX6675 with Type K Thermocouple
Quick info:
- Supply voltage: 3 to 5.5V
- Module current: 50mA
- Module interface: Serial (SO, SCK, CS), 16-bit SPI compatible
- Thermocouple temperature range: 0 to 450°C
- Module sensor temperature range: 0 to 1024°C
Rs 790.00MAX6675 with Type K Thermocouple
Rs 790.00 -
MC-38 Wired Magnetic Door Window Switch
Quick Info :
- Connection type : Normally Open
- Actuation Distance (mm) : 15 ~ 25
- Connecting cable length (cm) : 30
Rs 290.00MC-38 Wired Magnetic Door Window Switch
Rs 290.00 -
Mini Display Temperature Humidity Sensor
Quick Info :
- LCD Size: 35.7*16.8mm
- Operation Temperature: -15°c to 70°c
- Humidity measurement range: 10%~99%
Rs 590.00Mini Display Temperature Humidity Sensor
Rs 590.00 -
MPU-6050 3 Axis Gyroscope + Accelerometer Module
Quick Info :
- Model: GY-521
- Chip: MPU-6050
- Power supply: 3.3V
- Communication mode: standard IIC communication protocol
Rs 790.00 -
MQ-135 Gas Sensor Module for Air Quality
Quick Info :
- Operating Voltage: 2.5V to 5.0V
- Power consumption: 150mA
- Detect/Measure: NH3, Nox, CO2, Alcohol, Benzene, Smoke
- Typical operating Voltage: 5V
Rs 490.00MQ-135 Gas Sensor Module for Air Quality
Rs 490.00 -
MQ-2 Gas Sensor Module for Combustible Gas
Quick Info :
- Operating Voltage is +5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
- Analog output voltage: 0V to 5V
- Digital Output Voltage: 0V or 5V (TTL Logic)
Rs 490.00 -
MQ-3 Gas Sensor Module for Alcohol
Quick Info :
- Power requirements: 5 VDC
- Current Consumption: 150mA
- DO output: TTL digital 0 and 1 ( 0.1 and 5V)
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol
Rs 590.00MQ-3 Gas Sensor Module for Alcohol
Rs 590.00 -
MQ-4 Gas Sensor Module for Methane Gas
Quick Info :
- Power requirements : VCC – 5V±0.1
- DO output : TTL digital 0 and 1 (0.1 and 5V)
- AO output : 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detection Gas : Natural gas/Methane
- Detection Concentration : 200-10000ppm (Natural gas / Methane)
Rs 590.00MQ-4 Gas Sensor Module for Methane Gas
Rs 590.00 -
NTC Thermistor Module
Quick Info :
- Operating Voltage: 3.3V DC to 5V DC
- Output Current : 15mA
- PCB Size : 32 x 14mm
Rs 240.00NTC Thermistor Module
Rs 240.00 -
PH Sensor Test Pen
Quick Info :
- Measure range : 0.00-14.00 pH
- Resolution : 0.01 pH
- Accuracy : +/- 0.01 pH
Rs 2,790.00PH Sensor Test Pen
Rs 2,790.00 -
Pulse & Heart Rate Sensor Module
Quick Info :
- Biometric Pulse Rate or Heart Rate detecting sensor
- Plug and Play type sensor
- Operating Voltage: +5V or +3.3V
- Current Consumption: 4mA
Rs 690.00Pulse & Heart Rate Sensor Module
Rs 690.00 -
Rain Drop Sensor Module
Quick Info
- Working voltage : 5V
- Output format : Digital switching output (0 and 1), and analog voltage output AO
- Potentiometer adjust the sensitivity
- Uses a wide voltage LM393 comparator
Rs 230.00Rain Drop Sensor Module
Rs 230.00 -
Reed Sensor Module Magnetic Control Switch
Quick info:
- Operating Voltage: 3.3V to 5V DC
- Output format: Digital switching output ( 0 and 1 )
- LEDs indicating output and power
Rs 250.00 -
Soil Hygrometer Humidity Detection Module
Quick Info :
- Operating voltage: 3.3V~5V.
- Adjustable sensitivity (shown in blue digital potentiometer adjustment)
- Dual output mode,analog output more accurate.
- A fixed bolt hole for easy installation.
- With power indicator (red) and digital switching output indicator (green).
Rs 230.00 -
Sound Sensor Module
Quick Info :
- Operating voltage : 3.3 V
- Operating current : 4~5 mA
- Signal to noise ratio : 54 dB
Rs 200.00 -
TCRT5000 Line Following/ Optical Sensor Module
Quick Info :
- Working voltage of 3.3V to 5V
- Output form: digital switch output (0 and 1)
- Using infrared reflection sensors TCRT5000
- Test reflection distance: 1mm to 25mm
Rs 180.00Rs 270.00TCRT5000 Line Following/ Optical Sensor Module
Rs 180.00Rs 270.00 -
TCS34725 RGB Color Sensor Module
Quick info :
- Model: TCS3472
- Communication: I2C
- Dimensions: 20.44mm / 0.8″ x 20.28mm / 0.79″
Rs 1,100.00TCS34725 RGB Color Sensor Module
Rs 1,100.00