-
HC-SR501 Pyroelectric Infrared Motion Sensor (PIR)
Quick Info :
- Voltage: 5V
- Power Consumption : 65mA
- Sensing range : < 120 °, within 7 meters
Rs 320.00Rs 390.00HC-SR501 Pyroelectric Infrared Motion Sensor (PIR)
Rs 320.00Rs 390.00 -
HC-SR04 Ultrasonic Sensor Module
Specifications :
- Input Voltage: 5V
- Current Draw: 20mA (Max)
- Range: 2cm – 400 cm
Rs 320.00Rs 430.00HC-SR04 Ultrasonic Sensor Module
Rs 320.00Rs 430.00 -
AS5600 Magnetic Encoder Module V2
Quick Info :
- Supply Voltage : 3-3.6 and 4.5-5.5
- Temperature Range [°C] : -40 to +125
- Output : Analog out / PWM / I²C
- Interface : I²C
- Resolution [bit]: 12
Rs 790.00 -
DHT22 Temperature and Humidity Sensor
Quick Info :
- Operating Voltage : 3.5V to 5.5V
- Temperature Range : -40°C to 80°C
- Humidity Range : 0% to 100%
Rs 990.00DHT22 Temperature and Humidity Sensor
Rs 990.00 -
KY-022 IR Receiver Module
Quick Info :
- Chip type: VS1838B
- Operating Voltage: 3.3V to 5V
- Current Consumption: 1.5mA peak
- Receiving angle: 90 °
- Reception distance: 17m
Rs 220.00KY-022 IR Receiver Module
Rs 220.00 -
KY-005 IR Transmitter Module
Quick Info :
- Operating Voltage: 5V
- Current Consumption: 30-60mA
- Frequency: 38kHz
- Wavelength: 940nm
Rs 220.00KY-005 IR Transmitter Module
Rs 220.00 -
Infrared Obstacle Avoidance Sensor Module
Quick Info :
- Working Voltage : 3.3v to 5v
- Detectable Distance : 2 ~ 30cm,
- Detection angle : 35 °
- Comparator chip: LM393
Rs 180.00 -
LDR Light Sensitive Module
Quick Info :
- Adjustable sensitivity (via blue digital potentiometer adjustment)
- Operating voltage 3.3V-5V
- Output Type : Digital switching outputs (0 and 1) -D0
- Using LM393 comparator chip, stable
Rs 130.00LDR Light Sensitive Module
Rs 130.00 -
Sound Sensor Module
Quick Info :
- Operating voltage : 3.3 V
- Operating current : 4~5 mA
- Signal to noise ratio : 54 dB
Rs 200.00 -
Capacitive Touch 1 Pad Sensor TTP223
Quick Info :
- Operating voltage – 2.0V~5.5V
- Operating current – VDD = 3V, no load
- At low power mode typical 1.5uA, maximum 3.0uA
Rs 180.00Capacitive Touch 1 Pad Sensor TTP223
Rs 180.00 -
INA226 Bi-Directional Current Module I2C
Quick Info :
- Senses Bus Voltages : 0 V to 36 V
- High-Side or Low-Side Sensing
- Reports Current, Voltage, and Power
- Operates from 2.7-V to 5.5-V Power Supply
Rs 900.00Rs 1,650.00INA226 Bi-Directional Current Module I2C
Rs 900.00Rs 1,650.00 -
ACS712 5A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 5A
- 5V power supply, on-board power indicator
Rs 550.00ACS712 5A Current Sensor Module
Rs 550.00 -
-
MAX30100 Pulse Oximeter and Heart Rate Sensor Module
Quick Info :
- Optical sensor: IR and red LED combined with a photodetector
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- 3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and high-performance analog front
Rs 490.00 -
DS18B20 Stainless Steel Temperature Sensor Probe
Quick Info :
- Usable temperature range: -55 to 125°C (-67°F to +257°F)
- Usable with 3.0V to 5.5V power/data
- Stainless steel tube 6mm diameter by 30mm long
- Cable is 36″ long / 91cm, 4mm diameter (1 Meter Long)
Rs 290.00 -
Magnetic Reed Switch 10mm
Quick info:
- Normally Open
- Voltage:
- Switching (VDC-MAX.): 200
- Breakdown (VDC-MIN): 250
- Arc-Quench (VDC-MIN): 200
- Current:
- Switching (AMPERES-MAX.): 0.5
- Carry (AMPERES-MAX.): 1.2
Rs 90.00Magnetic Reed Switch 10mm
Rs 90.00 -
MQ-2 Gas Sensor Module for Combustible Gas
Quick Info :
- Operating Voltage is +5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
- Analog output voltage: 0V to 5V
- Digital Output Voltage: 0V or 5V (TTL Logic)
Rs 490.00 -
Flame Sensor Module
Quick Info :
- Operating Voltage : 3.3V ~ 5.5V
- Infrared Wavelength Detection : 760nm ~ 1100nm
- Sensor Detection Angle : 60°
Rs 280.00Flame Sensor Module
Rs 280.00 -
DHT11 Humidity and Temperature Sensor
Quick Info :
- Working Voltage : 3 to 5V DC
- Humidity Range : 20-80% humidity; ±5% accuracy
- Temperature Range : -20°C to 50°C temperature; ±2°C accuracy
Rs 390.00DHT11 Humidity and Temperature Sensor
Rs 390.00 -
Voltage Sensor Module 25V
Quick Info :
- Voltage sensing range – 5v to 25v
- Voltage Analog Resolution: 0.00489V
Rs 150.00Voltage Sensor Module 25V
Rs 150.00 -
KY-008 5mW Laser sensor Module
Quick Info :
- Operating Voltage 5V
- Output Power 5mW
- Wavelength 650nm
- Operating Current less than 40mA
Rs 290.00KY-008 5mW Laser sensor Module
Rs 290.00 -
Infrared Speed Sensor Module
Quick Info :
- Working voltage: 3.3V~5V
- The output form: Digital switching outputs. (0 and 1)
- Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00Infrared Speed Sensor Module
Rs 250.00 -
Inductive Proximity Sensor NPN PL-05N
Quick Info :
- Sensing distance: 5mm
- Operating voltage: DC 10-30V
- Screw hole : 3.2mm, Pitch : 10.5mm
- Wire length : 100cm (39-inch)
Rs 690.00Inductive Proximity Sensor NPN PL-05N
Rs 690.00 -
-
BME680 Humidity Temperature Pressure Gas
Quick Info :
- Interface: I²C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)
- Compatible with 3.3V and 5V Systems
- Gas, humidity, pressure and temperature.
Rs 3,290.00BME680 Humidity Temperature Pressure Gas
Rs 3,290.00 -
Soil Hygrometer Humidity Detection Module
Quick Info :
- Operating voltage: 3.3V~5V.
- Adjustable sensitivity (shown in blue digital potentiometer adjustment)
- Dual output mode,analog output more accurate.
- A fixed bolt hole for easy installation.
- With power indicator (red) and digital switching output indicator (green).
Rs 230.00 -
MQ-135 Gas Sensor Module for Air Quality
Quick Info :
- Operating Voltage: 2.5V to 5.0V
- Power consumption: 150mA
- Detect/Measure: NH3, Nox, CO2, Alcohol, Benzene, Smoke
- Typical operating Voltage: 5V
Rs 490.00MQ-135 Gas Sensor Module for Air Quality
Rs 490.00 -
Turbidity Sensor Detection Module Kit
Specifications:
- Working Voltage: DC5V
- Working Current: 30mA(MAX)
- Response Time: <500mS
- Insulation Resistance: 100M¦¸(Min)
Rs 4,350.00Turbidity Sensor Detection Module Kit
Rs 4,350.00 -
Infrared Encoder/Decoder Module
Quick Info :
- Power Supply Voltage : 5V
- Size : 27 * 17mm
- Communication Type : serial port communication (TTL level)
Rs 650.00Infrared Encoder/Decoder Module
Rs 650.00 -
NTC Thermistor Module
Quick Info :
- Operating Voltage: 3.3V DC to 5V DC
- Output Current : 15mA
- PCB Size : 32 x 14mm
Rs 240.00NTC Thermistor Module
Rs 240.00 -
Rain Drop Sensor Module
Quick Info
- Working voltage : 5V
- Output format : Digital switching output (0 and 1), and analog voltage output AO
- Potentiometer adjust the sensitivity
- Uses a wide voltage LM393 comparator
Rs 290.00Rain Drop Sensor Module
Rs 290.00 -
Capacitive Soil Moisture Sensor
Quick info :
- Operating voltage: 3.3V~5V
- Interface: PH2.54-3P
Rs 290.00Capacitive Soil Moisture Sensor
Rs 290.00 -
TDS and EC Meter
Quick Info :
- Conductivity : 0 – 9990 us/cm
- TDS : 0 – 5000ppm
- Temperature :
- Degrees Celsius : 0.1 – 80,
- Fahrenheit : 32.0 – 176
- Accuracy : 2%
Rs 2,590.00TDS and EC Meter
Rs 2,590.00 -
BMP280 Barometric Pressure Sensor Module
Quick Info :
- Operating Voltage : 1.8v – 3.6v DC
- Temperature Sensor Range : -40-80°C
- Accuracy : 1.0 °C
- Resolution : 0.01°C
- Barometric Pressure Sensor Range : 30,000 – 110,000 Pa
Rs 390.00BMP280 Barometric Pressure Sensor Module
Rs 390.00 -
Vibration SW-18010P Sensor Module
Quick Info :
- Working voltage : 3.3V ~ 5V
- Output type: Digital switching output (0 and 1)
- Wide voltage : comparator LM393
Rs 220.00Vibration SW-18010P Sensor Module
Rs 220.00