-
NEO-6M GPS Module with Active Antenna
Quick Info :
- Operating temperature range: -40 TO 85°CUART TTL socket
- EEPROM to save configuration settings
- Rechargeable battery for Backup
- Supply voltage: 3.3 V
Rs 1,100.00Rs 1,800.00NEO-6M GPS Module with Active Antenna
Rs 1,100.00Rs 1,800.00 -
NRF24L01 2.4GHz Transceiver Adapter Base
Quick Info :
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
Rs 200.00Rs 250.00NRF24L01 2.4GHz Transceiver Adapter Base
Rs 200.00Rs 250.00 -
NRF24L01 2.4GHz Transceiver With Antenna
Quick Info :
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
Rs 600.00Rs 850.00NRF24L01 2.4GHz Transceiver With Antenna
Rs 600.00Rs 850.00 -
NRF24L01 2.4GHz Wireless Transceiver
Quick Info:
- Frequency Band : 2.4GHz to 2.525GHz
- Data Rate : 250Kbps, 1Mbps, 2Mbps
- Operating Voltage : 1.9V to 3.6V
- Communication Range : Up to 100m (Open Air)
Rs 340.00Rs 490.00NRF24L01 2.4GHz Wireless Transceiver
Rs 340.00Rs 490.00 -
NX3224T024 Nextion 2.4″ TFT LCD Touch Display
Quick Info:
- Display Size : 2.4 inches
- Resolution : 320 × 240 px (QVGA)
- Touch Panel : Resistive
- Interface : UART Serial
- Operating Voltage : 5V DC
- Flash Memory : 4MB
- Onboard Processor : ARM Cortex-M0
Rs 9,250.00Rs 9,500.00NX3224T024 Nextion 2.4″ TFT LCD Touch Display
Rs 9,250.00Rs 9,500.00 -
OLED 128X64 0.96 inch Display Module
Quick Info :
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00OLED 128X64 0.96 inch Display Module
Rs 750.00Rs 990.00 -
OLED Navigation Module EC11 Encoder 1.3″ 128×64
Quick Info:
- Display : 1.3″ OLED, SH1106, 128×64, white monochrome
- Interface : I²C (0x3C / 0x3D selectable)
- Pull-up Resistors : 4.7kΩ onboard
- Encoder : EC11 — 20 pulses / 20 detents
- Encoder Input : Rotate (TRA/TRB) + Push (PSH)
- Navigation Buttons : CON (confirm) + BAK (back)
- Operating Voltage : 3.3V DC
- Compatible : Arduino / ESP32 / Raspberry Pi / STM32
- Libraries : U8g2 / Adafruit SSD1306
Rs 1,450.00Rs 1,850.00OLED Navigation Module EC11 Encoder 1.3″ 128×64
Rs 1,450.00Rs 1,850.00 -
OV3660 Camera Module 3MP 160° 75mm for ESP32
Quick Info:
- Sensor : OmniVision OV3660
- Resolution : 3 Megapixels (HD)
- Lens Angle : 160°
- Cable Length : 75mm (FFC)
- Interface : DVP 24-PIN
- Output Format : YUV, RGB
- Compatible Boards : ESP32-CAM, ESP32-S3
- Driver Support : Espressif esp32-camera library (native)
Rs 2,750.00Rs 2,950.00OV3660 Camera Module 3MP 160° 75mm for ESP32
Rs 2,750.00Rs 2,950.00 -
OV3660 Camera Module ESP32 66° 850nm NV
Quick Info:
- Image Sensor : OV3660
- Resolution : 3MP
- Field of View : 66 Degrees
- IR Wavelengths : 650nm / 850nm
- Night Vision : Yes
- Connector : 24-Pin FPC, 0.5mm Pitch, 75mm Cable
- Compatibility : ESP32-CAM
Rs 2,300.00Rs 2,500.00OV3660 Camera Module ESP32 66° 850nm NV
Rs 2,300.00Rs 2,500.00 -
OV7670 Camera Module
Quick Info :
- Resolution 640×480 VGA
- Flicker (50/60 Hz) auto detection
- Onboard regulator, only single 3.3V supply needed
Rs 680.00Rs 925.00OV7670 Camera Module
Rs 680.00Rs 925.00 -
PAM8403 3W Audio Amplifier
Quick Info:
- Supply Voltage: 5VDC
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 130.00PAM8403 3W Audio Amplifier
Rs 130.00 -
PAM8406 5W Audio Amplifier
Quick Info :
- 5W Output at 10% (Total Harmonic Distortion) THD with a 2Ω Load and 5V Power Supply at Class-D Mode
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 290.00Rs 390.00PAM8406 5W Audio Amplifier
Rs 290.00Rs 390.00 -
PAM8610 15Wx2 Stereo Audio Amplifier Board
Quick Info :
- Main Chip: PAM8610
- Power Range: DC 6V-15V (self-protection)
- Recommended Voltage: DC 12V(2A)
- Output Power: 10Wx2(8Ω) 15Wx2(4Ω)
Rs 450.00 -
PAM8610 Audio Stereo Amplifier Board 2×10W Dual Channel
Quick Info :
- Chip: PAM8610 Class D
- Power: 10W × 2 channels
- Voltage: DC 7.5-15V (12V optimal)
- Efficiency: 90%
- THD: 0.1% (Ultra-low distortion)
Rs 550.00Rs 650.00PAM8610 Audio Stereo Amplifier Board 2×10W Dual Channel
Rs 550.00Rs 650.00 -
Panel Mount Voltmeter DC5-120V
Quick Info :
- Voltage Range: DC 5 V – 120 V
- Display: 3-digit LED
- Accuracy: ±1%
- Connection: 2-wire
- Cutout Size: 45 mm x 26 mm
Rs 380.00Rs 450.00Panel Mount Voltmeter DC5-120V
Rs 380.00Rs 450.00 -
PC817 Optocoupler Isolation Board 3.6-30V
Quick Info:
- Optocoupler Type : PC817
- Drive Signal Voltage : 3.6V – 24V
- Output Voltage Range : 3.6V – 30V
- Output Logic : Jumper Configurable
Price range: Rs 350.00 through Rs 950.00 -
PCA9685 16-Channel 12-Bit PWM Servo Driver
Quick Info :
- Driver IC : PCA9685
- Channels : 16 independent PWM outputs
- Resolution : 12-bit (4096 steps)
- Interface : I2C (SDA, SCL)
- Chainable : Up to 62 boards (992 channels)
Rs 950.00Rs 1,200.00PCA9685 16-Channel 12-Bit PWM Servo Driver
Rs 950.00Rs 1,200.00 -
PCF8574 LCD to I2C Adapter Board
Quick Info :
- IC Chip : PCF8574 / PCF8574T
- Compatible Displays : 1602 (16×2) & 2004 (20×4) LCD Modules
- I2C Address : 0x20 to 0x27 (jumper selectable)
- Operating Voltage : 2.5V to 6V
Rs 200.00Rs 390.00PCF8574 LCD to I2C Adapter Board
Rs 200.00Rs 390.00 -
PCF8574T 8-Bit I2C IO Expander Module
Quick Info :
- Chip: PCF8574T
- Interface: I2C (SDA/SCL)
- IO Pins: 8-bit expandable
- Voltage: 5V
- Address: Configurable (0x20-0x27)
- Max Modules: 8 per I2C bus
- Features: Onboard DIP switches
Rs 280.00Rs 300.00PCF8574T 8-Bit I2C IO Expander Module
Rs 280.00Rs 300.00 -
PCM5102 DAC I2S Interface Decoder
Quick Info :
- Chip: PCM5102
- Resolution: Up to 32-bit/384kHz
- Interface: I2S
- Power: 3.3 V – 5 V DC
Rs 850.00Rs 1,050.00PCM5102 DAC I2S Interface Decoder
Rs 850.00Rs 1,050.00 -
PIC K150 USB Microcontroller Programmer
Quick Info:
- Interface : USB
- Programming Socket : 40-pin DIP (ZIF)
- Supported Chips : PIC10 / PIC12 / PIC16 / PIC18
- Power Source : USB (no external supply)
Rs 2,550.00Rs 2,900.00PIC K150 USB Microcontroller Programmer
Rs 2,550.00Rs 2,900.00 -
PICkit3 PIC Programmer Debugger with Adapter
Quick Info:
- Interface : USB (Full Speed)
- Programming Protocol : ICSP
- Supported Devices : PIC10/12/16/18/24, dsPIC
- Included Accessory : ICSP Adapter Board
Rs 5,650.00Rs 6,250.00PICkit3 PIC Programmer Debugger with Adapter
Rs 5,650.00Rs 6,250.00 -
-
Plastic Gear for Coreless Drone Motor 9 Teeth
Quick Info :
- Teeth: 9 teeth
- Material: Engineering plastic
- Motor Type: 7mm coreless
- Bore: 1.0mm
- Weight: <0.5g
Rs 50.00Rs 100.00Plastic Gear for Coreless Drone Motor 9 Teeth
Rs 50.00Rs 100.00 -
Plastic Wheel + Gear Motor
Quick Info :
- Name: TT motor
- Type: 1:48
- Speed: 45±10%r/min 90±10%r/min
- Rated voltage: 3V/6V
Rs 350.00Plastic Wheel + Gear Motor
Rs 350.00 -
PN532 NFC RFID Reader Writer Module
Quick Info :
- Chip: NXP PN532
- Frequency: 13.56MHz
- Range: 5-7cm read/write
- Interface: I2C/SPI/UART (selectable)
- Cards: Mifare, NTAG, NFC, FeliCa
- Voltage: 3.3V – 5V
- Compatible: Arduino, Raspberry Pi, ESP32
- Function: Read & Write NFC/RFID tags
Rs 1,150.00Rs 1,350.00PN532 NFC RFID Reader Writer Module
Rs 1,150.00Rs 1,350.00 -
Power Line Communication Module KQ330
Quick Info :
- Type: Power Line Communication Module
- Data Rate: ~10kbps
- Carrier Frequency: 120 kHz
- Operating Voltage: 230V AC
Rs 3,950.00Rs 4,350.00Power Line Communication Module KQ330
Rs 3,950.00Rs 4,350.00 -
PWM DC 6V – 28V 3A Motor Speed Controller
Quick Info :
- Input supply voltage: 6V-28VDC
- The maximum output power: 80W
- The maximum continuous output current : 3A
Rs 450.00 -
PWM DC Motor Speed Controller 60A
Quick Info :
- Input Voltage: DC 10V – 55V
- Continuous Current: 60A
- Maximum Peak Current: 100A
- Maximum Power: approx 3000W
Rs 2,350.00Rs 2,600.00PWM DC Motor Speed Controller 60A
Rs 2,350.00Rs 2,600.00 -
PWM Frequency Generator Module 2 Channel 1Hz to 150KHz
Quick Info :
- Channels: 2 independent PWM outputs
- Frequency: 1Hz – 150KHz
- Duty Cycle: 1% – 100%
- Power: 5V-30V DC or MicroUSB
- Display: 3-digit LED with buttons
- Output: 30mA per channel
- Control: Manual buttons or RS232 serial
Rs 550.00Rs 590.00PWM Frequency Generator Module 2 Channel 1Hz to 150KHz
Rs 550.00Rs 590.00 -
QFP100 to DIP100 Adapter Programming Socket
Quick Info :
- Type: QFP to DIP Adapter Socket
- Package: QFP100/TQFP100/LQFP100
- Pin Pitch: 0.5mm
- IC Size: 14×14mm body
- Output: DIP100 (2.54mm pitch)
Rs 7,500.00Rs 7,900.00QFP100 to DIP100 Adapter Programming Socket
Rs 7,500.00Rs 7,900.00 -
Raspberry Pi 5 Active Cooler Fan
Quick Info :
Rs 1,900.00Rs 2,250.00Raspberry Pi 5 Active Cooler Fan
Rs 1,900.00Rs 2,250.00 -
Raspberry Pi 5 Camera Cable 200mm FFC
Quick Info:
- Connector A : 22-pin, 0.5mm pitch (Pi 5 side)
- Connector B : 15-pin, 1mm pitch (Camera side)
- Cable Length : 200mm
- Interface : CSI only (not DSI compatible)
Rs 950.00Rs 1,100.00Raspberry Pi 5 Camera Cable 200mm FFC
Rs 950.00Rs 1,100.00 -
Raspberry Pi Camera Module V1.3 5MP OV5647
Quick Info :
- Sensor: OV5647 5MP
- Still Images: 2592 × 1944 pixels
- Video: 1080p @ 30fps
- Interface: CSI (15-pin ribbon)
- Focus: Fixed (50cm to ∞)
- FOV: 67.9° diagonal
- Compatible: All Raspberry Pi with CSI port
- Version: V1.3
Rs 1,250.00Rs 1,550.00Raspberry Pi Camera Module V1.3 5MP OV5647
Rs 1,250.00Rs 1,550.00 -
RC Airplane Control Horn 16×17mm Plastic 3-Hole 1.6mm
Quick Info :
- Size: 16mm × 17mm
- Holes: 3 × 1.6mm diameter
- Material: Rigid nylon plastic
- Color: White
- Mount: Screw or adhesive
- Compatible: 1.0-1.6mm push rods
- Use: Aileron/elevator/rudder horns
- Aircraft: Universal fixed-wing RC
Rs 120.00Rs 150.00RC Airplane Control Horn 16×17mm Plastic 3-Hole 1.6mm
Rs 120.00Rs 150.00
