Quick Info :
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electronic projects.
TTL interface output. easy to connect to your MCU.
Rs 490.00
Quick Info :
Chipset: MAX3232
Working Voltage: 3.3V-5.5V
Port: TX RX VCC GND
Rs 390.00
Quick Info :
Simple 3 pin interface to control the resistance
Supply voltage: 3V-5V
Chip: X9C103S
PCB board size: 2.7 * 1.3CM
10K span potentiometer.
Rs 590.00
Quick Info :
Operation Voltage: 2.7V-5V
Operation Current: < 1.5mA
Sample rate: 10Hz
Simultaneous 50 and 60Hz supply rejection
Available Load Cells 5kg, 10kg or 20kg
Rs 290.00
Quick Info :
Standard USB type A male and TTL 5 pin connector.
5 pins for 3.3V, TXD, RXD, GND & 5V.
Baud rates: 300 bps to 1.5 Mbps
Rs 790.00
Quick Info :
Option 1 : DB9 Connector
Option 2 : DB9 and DB25 Connectors
Rs 850.00Rs 990.00
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 590.00
Quick Info :
4 channels can convert up to 4 logic signals
Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
Bi-directional so can work with bi-directional buses such as I2C
Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00
Quick Info :
Resolution 640×480 VGA
Flicker (50/60 Hz) auto detection
Onboard regulator, only single 3.3V supply needed
Rs 590.00Rs 925.00
Quick Info :
Maximum output power: 3W*2(5V 4Ω)
Built with switch Potentiometer
Rs 320.00
Quick Info:
Working voltage: 6 to 18V
Dual channel 15W+15W
on-board dial potentiometer
Rs 590.00
Quick Info :
18 W mono amplifier circuit design
On-board 10K potentiometer for volume adjustment
Operating Voltage Range: 6 V to 12 V
Rs 350.00
Quick Info :
5W Output at 10% (Total Harmonic Distortion
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 550.00
Quick Info:
Supply Voltage: 5VDC
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 190.00
Quick Info :
MT8870 Frequency decoder chip
Onboard 3.5mm input interface
5V Input
Designed to be compatible with standard 2.54mm sockets
Rs 490.00
Quick Info :
Microcontroller: ESP8266
Operating Voltage: 3.3V
Input Voltage: 7-12V
Digital I/O Pins (DIO): 16
Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00
Quick Info:
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
Power via USB or External Source
Onboard 5V Regulator
6 I/O Pins
Rs 450.00
