Quick Info :
The working voltage: 5 ~ 12V
Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input).
Maximum output current: >=15mA (5V IN), >=35mA (12V IN)
Rs 290.00
Quick Info :
Frequency : 500kHzSupply Voltage Min : 4.5VSupply Voltage Max : 16V
Rs 30.00
Quick Info :
Operating temperature range: -40 TO 85°CUART TTL socket
EEPROM to save configuration settings
Rechargeable battery for Backup
Supply voltage: 3.3 V
Rs 1,290.00Rs 1,800.00
Quick Info :
Microcontroller: ESP8266
Operating Voltage: 3.3V
Input Voltage: 7-12V
Digital I/O Pins (DIO): 16
Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00
Quick Info :
Units of measurement : mg/kg(mg/L)
Measurement parameters : Soil Nitrogen, Phosphorus, Potassium
Measurement range : 0-1999mg/kg(mg/L)
Measurement accuracy : ±3%(mg/kg)
Resolution : 1mg/kg(mg/L)
Supply voltage : 5-30V DC
Rs 26,990.00
QUICK OVERVIEW
Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
Built-in hardware CRC error detection, Multipoint communication address control.
Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
Built-in 2.4Ghz antenna
Built-in voltage regulator
Rs 490.00
Quick Info :
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
Rs 250.00
Quick Info :
Voltage: 3-3.6V (recommended 3.3V) V.
Maximum output power: +20dBm.
Power-down mode current: 4.2uA.
Operating Range: 1Km
Rs 950.00
Quick Info :
Operating Voltage: 3.3V DC to 5V DC
Output Current : 15mA
PCB Size : 32 x 14mm
Rs 240.00
Quick Info :
OLED Driver IC: SSD1306
Resolution: 128 x 64
Visual Angle: >160°
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00
Quick Info :
Input: Micro USB Male
Output: USB-A Female
Data Transfer Rate: Supports USB 2.0 standard with speeds up to 480 Mbps.
Length : 12cm
Color : Black
Rs 200.00
Quick Info :
Resolution 640×480 VGA
Flicker (50/60 Hz) auto detection
Onboard regulator, only single 3.3V supply needed
Rs 590.00Rs 925.00
Quick Info:
Supply Voltage: 5VDC
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 130.00
Quick Info :
Maximum output power: 3W*2(5V 4Ω)
Built with switch Potentiometer
Rs 320.00
Quick Info :
5W Output at 10% (Total Harmonic Distortion
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 550.00
Quick Info :
Main Chip: PAM8610
Power Range: DC 6V-15V (self-protection)
Recommended Voltage: DC 12V(2A)
Output Power: 10Wx2(8Ω) 15Wx2(4Ω)
Rs 450.00
Quick Info :
Operating Voltage : 3V – 5V (typical 5V)
Current Consumption : ≤30mA
Rated Frequency : 1kHz – 3kHz (typically 2kHz)
Sound Output : 85dB @ 10cm (varies by model)
Drive Method : Requires external PWM signal
Rs 55.00
Quick Info :
Optocoupler Type : Phototransistor Output
Package : 4-Pin DIP / SMD
Input Type : Infrared LED
Output Type : NPN Phototransistor
Isolation Voltage : 5000V RMS
Forward Voltage : 1.2V
Rs 45.00
