Quick Info :
Specifications:
Microcontroller : ATmega32U4
Operating Voltage : 5V
Digital I/O Pins : 20
PWM Channels : 7
Analog Input Channels : 12
Rs 1,250.00
Quick Info :
Operating Voltage is 4.7V to 5.3V
Current consumption is 1mA without backlight
Alphanumeric LCD display module, meaning can display alphabets and numbers
Consists of four rows and each row can print 16 characters.
Compatible with LCD to I2C Adapter Board
Rs 1,390.00
Quick Info
On-board STM8S003F3P6 chip
On-board SWIM connector for programming
On-board reset switch
Reserved external crystal oscillator soldering place
AMS1117-3.3 voltage regulator for convering 5 V power supply to 3.3 V
Mini USB connector for powering the board
Board Size: 36.5 x 21.6 mm
Rs 250.00
Quick Info :
Voltage : 110-220v
Glue stick size: 11mm (Large)
On/Off Switch
Rs 1,190.00
Quick Info :
Ultra-high speed: 20,000 RPM at 3.7V
Coreless design for low noise and high efficiency
Compact size: 8mm diameter x 20mm length
Wide voltage range: 1V to 3.7V operation
Low current consumption: 0.01A
Precision 0.8mm shaft with 3.8mm length
Ready-to-use with 5cm color-coded wire leads
Rs 590.00
Quick Info :
Ultra-high speed: 20,000 RPM at 3.7V
Coreless design for low noise and high efficiency
Compact size: 7mm diameter x 17mm length
Wide voltage range: 1V to 3.7V operation
Low current consumption: 0.01A
Precision 0.8mm shaft with 3.8mm length
Ready-to-use with 5cm color-coded wire leads
Rs 390.00
Quick Info :
No. of Digits : 8
No. of Segments : 7
Supply Voltage Min : 4V
Supply Voltage Max : 5.5V
Rs 495.00
Quick Info
Operating Voltage : 9 – 12 V (Preferred 12V)
Case (L x W x H) : 53 x 40 x 28mm (2.1 x 1.6 x 1.1″)
Latch (L x W) : 10 x 10mm (0.4 x 0.4″)
Rs 1,590.00
Quick Info :
Power : 3 to 5VDC
Pressure sensing range : 300- 1100 h Pa (9000m to -500m above sea level)
This board/chip uses I2C 7-bit address 0x77.
Rs 450.00
Quick Info :
Power Requirements: 2.7 to 6.5 VDC
Communication Interface: I²C (up to 400 kHz)
Operating temperature: -22 to +185 °F to +85 °C)
Dimensions: 0.73 x .65 in ( 1.8 x 1.7 cm)
Rs 850.00
Quick Info :
Single-Supply Operation (2.7V to 5.5V)
Best Detection Range: 10mm
High-Resolution Conversion of Light Intensity to Frequency
Programmable Color and Full-Scale Output Frequency
Rs 750.00
Specifications :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 9V
Output Current: 1A
Plug Type : UK Plug
Rs 790.00
Quick Info :
Stepper motor deceleration
Diameter: 28mm
Voltage: 5V
Step angle: 5.625 x 1 / 64
Reduction ratio: 1 / 64
Rs 350.00Rs 490.00
Quick Info :
5-18V power supply supported.
Serial USB TTL compatible for 2.85V, 3.3V and 5v signal
GSM, GPRS, GPS {text messaging, data transmission, positioning} triple function.
Rs 4,000.00Rs 4,300.00
Quick Info :
The working voltage: 5 ~ 12V
Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input).
Maximum output current: >=15mA (5V IN), >=35mA (12V IN)
Rs 290.00
Quick Info :
All SD SPI pins output, MOSI, SCK, MISO, and CS.
Support 5V/3.3V input.
This module can handle 2GB SD cards.
Rs 350.00
Quick Info :
Channels : 4
Input release voltage: 3.5 to 5V
Rated load voltage: 100V to 240V AC
Load current: 0.10 to 2A
Rs 1,600.00
