-
-
STM8 Development Board STM8S003F3P6
Quick Info
- On-board STM8S003F3P6 chip
- On-board SWIM connector for programming
- On-board reset switch
- Reserved external crystal oscillator soldering place
- AMS1117-3.3 voltage regulator for convering 5 V power supply to 3.3 V
- Mini USB connector for powering the board
- Board Size: 36.5 x 21.6 mm
Rs 250.00STM8 Development Board STM8S003F3P6
Rs 250.00 -
Infrared Speed Sensor Module
Quick Info :
- Working voltage: 3.3V~5V
- The output form: Digital switching outputs. (0 and 1)
- Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00Infrared Speed Sensor Module
Rs 250.00 -
TP5100 Lithium Cell Charging Module
Quick Info :
- Model: TP5100
- Input Supply voltage (V): 5 ~ 18
- Programmable charge current: 0.1 ~ 2 A.
Rs 250.00TP5100 Lithium Cell Charging Module
Rs 250.00 -
Reed Sensor Module Magnetic Control Switch
Quick info:
- Operating Voltage: 3.3V to 5V DC
- Output format: Digital switching output ( 0 and 1 )
- LEDs indicating output and power
Rs 250.00 -
-
Project Enclosure 100mm X 64mm X 47mm
Quick Info :
- Dimensions: 100mm X 64mm X 47mm
Rs 260.00Project Enclosure 100mm X 64mm X 47mm
Rs 260.00 -
MP1584 Mini 3A DC to DC Step down (Buck) Adjustable Module
Quick Info :
- Input Voltage: 4.5V – 28V
- Output Voltage: 0.8V – 20V
- Output Voltage Adjustment: On-board potentiometer
- Output Current: 1.8A (typical), 3.0A (max).
Rs 275.00 -
2S 18650 Battery Charger with Charge Protection Module
Quick Info :
- Charging Voltage: 8.4V-9V
- Voltage Range: 4.25V-4.35V plus or minus 0.05V
- Voltage Range: 2.3V-3.0V plus or minus 0.05V
- Operating Current: 8A
Rs 275.00 – Rs 390.00 -
MP2307DN Mini 3A DC to DC Step down (Buck) Adjustable Module V2
Quick Info :
- Input voltage : 4.75 – 23VDC
- Adjustable Output voltage : 1.0 – 17VDC
- Output Amps : 3A surge current, 1.8A continuous rated current
Rs 280.00 -
-
0-100V DC Voltmeter
Quick Info :
- Working current: 20mA
- Operating voltage: 4-35 VDC
- Measurement rate: 200mS /Times
- Display Range : upto 100V
Rs 280.000-100V DC Voltmeter
Rs 280.00 -
Flame Sensor Module
Quick Info :
- Operating Voltage : 3.3V ~ 5.5V
- Infrared Wavelength Detection : 760nm ~ 1100nm
- Sensor Detection Angle : 60°
Rs 280.00Flame Sensor Module
Rs 280.00 -
NE555 Adjustable Pulse Frequency Duty Cycle Module Square Wave Signal Generator
Quick Info :
Main chip: NE555
Input Voltage (VCC): 5V-15VDC
Input current:~100MA
Output amplitude: 4.2V V-PP to 11.4V V-PP. (Varies with VCC voltage)Rs 280.00 -
Keypad Flexible 4 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 4-key membrane switch pad has 5 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 285.00Keypad Flexible 4 Keys
Rs 285.00 -
HX711 Load Cell Amplifier
Quick Info :
- Operation Voltage: 2.7V-5V
- Operation Current: < 1.5mA
- Sample rate: 10Hz
- Simultaneous 50 and 60Hz supply rejection
- Available Load Cells 5kg, 10kg or 20kg
Rs 290.00HX711 Load Cell Amplifier
Rs 290.00 -
Keypad Flexible 16 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 16-key membrane switch pad has 8 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 290.00Keypad Flexible 16 Keys
Rs 290.00 -
NE555 Pulse Generator Module
Quick Info :
- The working voltage: 5 ~ 12V
- Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input).
- Maximum output current: >=15mA (5V IN), >=35mA (12V IN)
Rs 290.00NE555 Pulse Generator Module
Rs 290.00