Quick Info :
Chip type: VS1838B
Operating Voltage: 3.3V to 5V
Current Consumption: 1.5mA peak
Receiving angle: 90 °
Reception distance: 17m
Rs 220.00
Quick Info :
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
Rs 250.00
Quick Info :
OLED Driver IC: SSD1306
Resolution: 128 x 64
Visual Angle: >160°
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00
Quick Inf :
Type of Control Channel: N -Channel
Maximum Power Dissipation (Pd): 416 W
Maximum Drain-Source Voltage |Vds|: 600 V
Maximum Gate-Source Voltage |Vgs|: 30 V
Maximum Drain Current |Id|: 20 A
Rs 290.00
Quick Info :
Shift Register Function : Serial to ParallelNo. of Bits Per Element : 8bitNo. of Pins : 16PinsSupply Voltage Min : 2VSupply Voltage Max : 6V
Rs 75.00
Quick Info :
Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232) at TTL levels.
Integrated +3.3V level converter for USB I/O
Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic.
Rs 590.00
Quick Info :
Package Type: 6 Pin Dip
Transistor Type: NPN Photo Transistor
Photo Transistor Max Collector Current(IC): 150mA
Photo Transistor Max Collector-Emitter Voltage (VCEO): 30V
Rs 60.00
Quick Info :
Voltage rating (UL/IEC): 250/250 V
Current rating (UL/IEC): 16/24 A
Contact resistance: 20 mΩ
Wire gauge: 22-14 AWG
Wire strip length: 5 mm
Rs 50.00
Quick Info :
Transistor Type : NPN
Current – Collector (Ic) (Max) : 800 mA
Voltage – Collector Emitter Breakdown (Max) : 30 V
Vce Saturation (Max) @ Ib, Ic : 1.6V @ 50mA, 500mA
Rs 10.00
Quick Info :
3V-6V DC Supply Voltage
On-board LDO Voltage regulator
Built-in Voltage level convertor (MOSFET based)
It can be interface with 3.3V or 5V Microcontroller.
Rs 690.00
Quick Info :
Name: TT motor
Type: 1:48
Speed: 45±10%r/min 90±10%r/min
Rated voltage: 3V/6V
Rs 350.00
Quick Info :
Working Voltage : 3.3v to 5v
Detectable Distance : 2 ~ 30cm,
Detection angle : 35 °
Comparator chip: LM393
Rs 180.00
Quick Info :
RGB Led Common Cathode
Lens: 5mm Diameter / Diffused / Round
R:620-625nm / G:515-520nm / B:450-455nm
Rs 15.00
Quick Info :
No. of Amplifiers : 1 AmplifierBandwidth : 1MHzSlew Rate : 0.5V/µsSupply Voltage Range : 10V to 36V
Rs 45.00
Quick Info :
Operating Voltage: 5V
Current Consumption: 30-60mA
Frequency: 38kHz
Wavelength: 940nm
Rs 220.00
Quick Info :
Maximum recurrent peak reverse voltage: 1000V
Maximum average forward current: 3A
Rs 20.00
Quick Info :
Channel : 2
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 590.00
Quick Info :
Transistor Polarity : PNPCollector Emitter Voltage V(br)ceo : 30VDC Collector Current : 100mAPower Dissipation Pd : 500mW
Rs 15.00
Quick Info :
Voltage: 3-3.6V (recommended 3.3V) V.
Maximum output power: +20dBm.
Power-down mode current: 4.2uA.
Operating Range: 1Km
Rs 950.00
Quick Info :
Input voltage: 4.35-6V (recommended voltage 5V) Charging current: 1 Amps
Led indicator: Red is charging, Blue is full charged
The board size: about 2.5 * 1.65 CM
Rs 150.00Rs 200.00
Quick Info :
Working current: 20mA
Operating voltage: 4-35 VDC
Measurement rate: 200mS /Times
Display Range : upto 100V
Rs 280.00
Quick Info :
Adjustable sensitivity (via blue digital potentiometer adjustment)
Operating voltage 3.3V-5V
Output Type : Digital switching outputs (0 and 1) -D0
Using LM393 comparator chip, stable
Rs 130.00
Quick Info :
ESP32 SoC with Wi-Fi and BLE connectivity
OV2640 2M pixel camera with connector included
Micro SD card connector
Reset button
Rs 2,290.00Rs 2,690.00
Specifications :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 12V
Output Current: 2A
Plug Type : UK Plug
Rs 790.00
Quick Info:
Bluetooth v2.0+EDR
2.4GHz ISM band frequency
Supported baud rate: 9600 (default), 19200,38400, 57600, 115200, 230400, 460800.
Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
Power supply: 3.6V to 6V DC
Rs 1,090.00Rs 1,350.00
Quick Info :
802.11 b/g/n
Operating Voltage: 3.3V
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Rs 590.00
Quick Info :
Operating voltage : 3.3 V
Operating current : 4~5 mA
Signal to noise ratio : 54 dB
Rs 200.00
Quick Info :
Input voltage: 3 – 32V Output voltage: 5 – 35V (adjustable) Output current: Maximum output current 4A Adjustable potentiometer onboard for output voltage adjustment.
Rs 450.00Rs 550.00
Quick Info :
1000V maximum repetitive peak reverse voltage
10A maximum average forward output rectified current
500A peak forward surge current
Rs 35.00
