Quick Info :
Type: Internal TV Speaker
Size : 60mm X 125mm
Impedance: 4 Ohms
Power Output: 3 Watts (RMS)
Frequency Response: 100 Hz – 15 kHz
Rs 490.00
Quick info :
Size: 4.5” – 6” inches (115mm – 150mm) – Compact for precision work
Cutting Capacity: 18-24 AWG (0.5mm – 1.2mm) for soft wires
Blade Type: Flush Cut / Semi-Flush Cut for smooth, clean cuts
Blade Material: Hardened High-Carbon Steel / Stainless Steel for durability
Blade Hardness: HRC 54-62 (Rockwell Hardness) – Ensures long-lasting sharpness
Coating: Anti-rust nickel plating or oxidation-resistant finish for longevity
Jaw Opening: 8mm – 12mm – Access tight spaces easily
Rs 490.00
Quick Info :
Interface Type: I2C.
Working voltage: 3.3~5.0V DC.
Temperature: -40ºC ~ 85ºC.
Humidity: 0 ~ 100%.
Rs 490.00
Quick Info :
Material : Steel Colour : Blue Maximum Cutting Capacity : 0.8mm to 1.2mm
Rs 490.00
Quick Info :
1-to-8 Bidirectional Translating Switches.
Supports Hot Insertion.
Low Standby Current.
1-to-8 Bidirectional Translating Switches.
Rs 490.00
Quick Info :
Dimensions: 175mm X 95mm X 30mm
Rs 490.00
Quick Info :
Power : 20W
Operating Voltage : 100-240V, 50/60Hz
Heating Time : 3-5 minutes
Glue Stick Diameter : 7mm-8mm
Nozzle Type : Precision metal nozzle for controlled application
Rs 490.00
Quick Info :
Operating Voltage is 4.7V to 5.3V
Current consumption is 1mA without backlight
Alphanumeric LCD display module, meaning can display alphabets and numbers
Consists of two rows and each row can print 16 characters.
Compatible with LCD to I2C Adapter Board
Rs 460.00Rs 490.00
Quick info :
Detection Voltage Range DC: 3.5-130V（max）
Voltage Sampling Period : 300ms/ second
Input Impedance : >100KΩ
Working Current : <10mA
Rs 450.00Rs 500.00
Quick Info :
Type of Control Channel: N -Channel
Maximum Power Dissipation (Pd): 280 W
Maximum Drain-Source Voltage |Vds|: 250 V
Maximum Gate-Source Voltage |Vgs|: 20 V
Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
Maximum Drain Current |Id|: 38 A
Rs 450.00
Quick Info :
Maximum supply voltage (Vcc max) ±52.5V
Recommended supply voltage (Vcc) ±35V
Recommended Load resistance (RL) 8Ω
Rs 450.00
Quick Info :
Power : 3 to 5VDC
Pressure sensing range : 300- 1100 h Pa (9000m to -500m above sea level)
This board/chip uses I2C 7-bit address 0x77.
Rs 450.00
Quick Info:
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
Power via USB or External Source
Onboard 5V Regulator
6 I/O Pins
Rs 450.00
Quick Info :
IC Type : Audio Power Amplifier
Supply Voltage : 5V to 18V
Output Power : Up to 5W
Input Resistance : 30kΩ
Quiescent Current : 10mA
Signal-to-Noise Ratio : 80dB
Rs 400.00
Quick Info :
Operating voltage range : DC 4.5-20V
Sensing distance : 3 meters
Delay Time : The default 8S + -30%
Rs 400.00
Quick Info:
Interface: USB 2.0
Support system : Windows 98/98SE/ME/2000/XP/Vista
Receiving and Sending rang: Up to 20 m
Rs 400.00Rs 500.00
Quick Info :
Drain Source Voltage (Vdss) : 55V
Continuous Drain Current (Id) : 49A
Power Dissipation (Pd) : 94W
Rs 390.00
Quick Info :
Type : USB A 2.0 Male and Female
Cable Length : 1.5m
Rs 390.00
Quick Info :
Ultra-high speed: 20,000 RPM at 3.7V
Coreless design for low noise and high efficiency
Compact size: 6mm diameter x 15mm length
Wide voltage range: 1V to 3.7V operation
Low current consumption: 0.01A
Precision 0.8mm shaft with 3.8mm length
Ready-to-use with 5cm color-coded wire leads
Rs 390.00
Quick Info :
Input: 1-5VDC
Output voltage: 5V
Output Current: 500mA
Rs 390.00
Quick Info :
Four 7-Segment LED Displays with 0.36″ high red digits
Built-in TM1637 LED Driver
2-wire serial interface for easy hookup to uC
3.3 and 5V compatible
Rs 390.00
Quick Info :
Operating Voltage : 2.0V to 5.5V
Battery Support : CR2032
Module Dimensions : Typically ~27mm x 14mm
Current Consumption : < 300nA (with backup battery)
Communication Interface : 3-wire (CE, I/O, SCLK)
Data Retention : Over 10 years with backup battery
Rs 350.00
