Best Seller Items
-
-
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 20.00 – Rs 110.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
LED 5mm Bulb Common Anode
Specification:
- 5mm Round Standard Directivity
- Color : Red, Blue, Green, White, Yellow
- UV Resistant : Eproxy
- Forward Current (IF): 30mA
- Forward Voltage (VF): 1.8V to 2.4V
Rs 4.00LED 5mm Bulb Common Anode
Rs 4.00
-
TB6600 Stepper Motor Driver
Quick Info :
- Compatible Motors: Nema 17/23/34(42/57/86 Stepper Motor)
- 9V-42V DC power supply;
- H-bridge bipolar constant-phase flow-driven;
- maximum output current of 4.0A eight optional
Rs 1,990.00TB6600 Stepper Motor Driver
Rs 1,990.00 -
HC-SR505 Mini PIR Sensor
Quick Info :
- Operating voltage range : DC 4.5-20V
- Sensing distance : 3 meters
- Delay Time : The default 8S + -30%
Rs 400.00HC-SR505 Mini PIR Sensor
Rs 400.00 -
8 channel 5V DC Relay Module
Quick Info :
- Channel : 8
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 1,400.008 channel 5V DC Relay Module
Rs 1,400.00 -
-
Rotary Encoder
Quick Info :
- EC11 potentiometer; Handle Length 20MM
- Shaft Movement Direction : 360 Degree
- Shaft Diameter : 6mm/ 0.24″
- Shaft Length : 7mm / 0.3″
Rs 30.00Rotary Encoder
Rs 30.00 -
MPU9250 9-DOF 3-Axis Accelerometer, Gyro, & Magnetometer
Quick Info :
- Acceleration, Gyroscope, and Magnetometer
- 9 DOF module
- Build-in ultra-low noise linear LDO voltage regulator.
- Built-in onboard filters, which reduce noise from the motor and other high current electronics.
Rs 1,590.00 -
MIC XLR Jack Male Metal
Quick Info :
- Microphone XLR Jack 3 Pin
Rs 290.00MIC XLR Jack Male Metal
Rs 290.00 -
Inductive Proximity Sensor PNP PL-05P
Quick Info :
- Sensing distance : 5mm
- Operating voltage : 10 – 30 VDC
- Response frequency : 800Hz
- Output method : PNP, 150mA load
Rs 690.00Inductive Proximity Sensor PNP PL-05P
Rs 690.00 -
Raspberry Pi Pico
Quick Info:
- RP2040 Microcontroller chip
- Dual-core Arm Cortex-M0+ processor
- Clock speed running up to 133 MHz
- 264KB on-chip SRAM
- 2MB on-board QSPI Flash
- Programmable using MicroPython or C language.
Rs 1,990.00Rs 2,490.00Raspberry Pi Pico
Rs 1,990.00Rs 2,490.00 -
16 channel 5V DC Relay Module
Quick Info :
- 16 Channel
- Maximum switching voltage: 250VAC / 30VDC
- Maximum switching current: 10A
- Module operating voltage: 5V
Rs 2,950.0016 channel 5V DC Relay Module
Rs 2,950.00 -
-
AS608 Fingerprint Reader Sensor Module
Specifications :
- Supply voltage: 3.6 – 6.0VDC
- Operating current: 120mA max
- Peak current: 150mA max
- Fingerprint imaging time: < 1.0 seconds
- Storage capacity: 162 templates
Rs 3,500.00AS608 Fingerprint Reader Sensor Module
Rs 3,500.00 -
TM1637 4 Digit LED Display Module
Quick Info :
- Four 7-Segment LED Displays with 0.36″ high red digits
- Built-in TM1637 LED Driver
- 2-wire serial interface for easy hookup to uC
- 3.3 and 5V compatible
Rs 390.00TM1637 4 Digit LED Display Module
Rs 390.00 -
Stereo Mic Base 6.35MM PCB Mount
Quick Info :
Gender: Female
Size: 6.35 mm
Mounting Type: PCB MountRs 80.00Stereo Mic Base 6.35MM PCB Mount
Rs 80.00 -
USB Male to Female Cable 1.5m
Quick Info :
- Type : USB A 2.0 Male and Female
- Cable Length : 1.5m
Rs 390.00USB Male to Female Cable 1.5m
Rs 390.00 -
Arduino Compatible ADK USB Host Shield
Quick Info :
- Works with standard (dual 5/3.3V) and 3.3V-only
- Supports HID devices, such as keyboards, mice, joysticks, etc.
- Compatible with Mass storage devices, such as USB sticks, memory card readers and external hard drives
Rs 1,990.00Arduino Compatible ADK USB Host Shield
Rs 1,990.00 -
GY-53 VL53L1X TOF UART Sensor Module
Quick Info:
- GY-53 infrared ranging module (VL53L0X + STM32)
- Module type: GY-53
- Use chip: VL53L0X + STM32
- Power supply: 3-5v (low dropout voltage regulator)
- Range: 2 meters (dark, long distance mode)
Rs 2,950.00GY-53 VL53L1X TOF UART Sensor Module
Rs 2,950.00 -
-
Waterproof Ultrasonic Module AJ-SR04M
Quick Info :
- Working Voltage : 3 – 5.5V.
- The maximum Current : 49mA 5V.
- Range : 20cm to 800 cm
Rs 1,550.00Waterproof Ultrasonic Module AJ-SR04M
Rs 1,550.00 -
-
DS18B20 Temperature Sensor Module
Quick Info :
- Temperature Range : -55°C to +85°C
- Wire Interface : 1-wire interface
- 3.3 and 5V compatible
Rs 290.00DS18B20 Temperature Sensor Module
Rs 290.00 -
ACS712 30A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 30A
- 5V power supply, on-board power indicator
Rs 550.00ACS712 30A Current Sensor Module
Rs 550.00 -
AT24C256 I2C interface EEPROM Memory Module
Quick Info:
- Onboard chip AT24C256 chip
- Onboard the I2C communications required pull-up resistor
- All pins are leads and marked
- PCB board Dimensions : 36.5 (mm) x12 (mm)
Rs 390.00 -
Keypad Flexible 12 Keys
Quick Info :
- 12-key membrane switch pad has 7 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 250.00Keypad Flexible 12 Keys
Rs 250.00 -
ATtiny85 Development Board
Quick Info:
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source
- Onboard 5V Regulator
- 6 I/O Pins
Rs 450.00ATtiny85 Development Board
Rs 450.00 -
-
2.4 inch TFT LCD Shield 240 X 320 Touch
Quick Info :
- 240*320 pixels
- Suitable for an Uno (Atmega328P) or Mega (Atmega2560) based Arduinos (other chips are not supported)
- Dimensions: 72.5 mm x 53 mm
- Driver: ILI9320 or ILI9341 (or compatible with one of two)
Rs 2,250.002.4 inch TFT LCD Shield 240 X 320 Touch
Rs 2,250.00 -
-
-