Best Seller Items
-
-
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00
-
18650 Rechargeable Battery 3.7V
Quick Info:
- Voltage : 3.7v
- Nominal Capacity : 1000 mAh, 1800 mAh or 3200 mAh
- Rechargeable: Yes
Rs 390.00 – Rs 990.00 -
IRFZ44NPBF N Channel MOSFET Original
Quick Info :
- Drain Source Voltage (Vdss) : 55V
- Continuous Drain Current (Id) : 49A
- Power Dissipation (Pd) : 94W
Rs 390.00IRFZ44NPBF N Channel MOSFET Original
Rs 390.00 -
Mini USB Bluetooth Adapter V2.0
Quick Info:
- Interface: USB 2.0
- Support system : Windows 98/98SE/ME/2000/XP/Vista
- Receiving and Sending rang: Up to 20 m
Rs 400.00Rs 500.00Mini USB Bluetooth Adapter V2.0
Rs 400.00Rs 500.00 -
-
-
HC-SR505 Mini PIR Sensor
Quick Info :
- Operating voltage range : DC 4.5-20V
- Sensing distance : 3 meters
- Delay Time : The default 8S + -30%
Rs 400.00HC-SR505 Mini PIR Sensor
Rs 400.00 -
-
ATtiny85 Development Board
Quick Info:
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source
- Onboard 5V Regulator
- 6 I/O Pins
Rs 450.00ATtiny85 Development Board
Rs 450.00 -
BMP180 Digital Barometric Pressure Sensor
Quick Info :
- Power : 3 to 5VDC
- Pressure sensing range : 300- 1100 h Pa (9000m to -500m above sea level)
- This board/chip uses I2C 7-bit address 0x77.
Rs 450.00 -
STK4192 Stereo Amplifier IC
Quick Info :
- Maximum supply voltage (Vcc max) ±52.5V
- Recommended supply voltage (Vcc) ±35V
- Recommended Load resistance (RL) 8Ω
Rs 450.00STK4192 Stereo Amplifier IC
Rs 450.00 -
-
IRFP264 N Channel MOSFET
Quick Info :
- Type of Control Channel: N -Channel
- Maximum Power Dissipation (Pd): 280 W
- Maximum Drain-Source Voltage |Vds|: 250 V
- Maximum Gate-Source Voltage |Vgs|: 20 V
- Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
- Maximum Drain Current |Id|: 38 A
Rs 450.00IRFP264 N Channel MOSFET
Rs 450.00 -
USB to ESP8266 WIFI Module Adapter Board
Quick Info :
Rs 460.00USB to ESP8266 WIFI Module Adapter Board
Rs 460.00 -
-
-
-
-
Project Enclosure 175mm X 95mm X 30mm
Quick Info :
- Dimensions: 175mm X 95mm X 30mm
Rs 490.00Project Enclosure 175mm X 95mm X 30mm
Rs 490.00 -
TCA9548A 1-to-8 I2C 8 Channel IIC Multiple Extensions
Quick Info :
- 1-to-8 Bidirectional Translating Switches.
- Supports Hot Insertion.
- Low Standby Current.
- 1-to-8 Bidirectional Translating Switches.
Rs 490.00 -
AC-DC 5V 1A SMPS Power Adapter
Quick Info :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 5V
- Output Current: 1A
- Plug Type : UK Plug
Rs 500.00AC-DC 5V 1A SMPS Power Adapter
Rs 500.00 -
PAM8406 5W Audio Amplifier
Quick Info :
- 5W Output at 10% (Total Harmonic Distortion) THD with a 2Ω Load and 5V Power Supply at Class-D Mode
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 550.00PAM8406 5W Audio Amplifier
Rs 550.00 -
18650 Lithium Battery Charger 2S AC230V
Quick Info :
- Suitable for: 3.7V lithium rechargeable batteries, including 18650
- Input: AC100-240V
- Output: 4.2V/1A * 2
Rs 550.00Rs 790.0018650 Lithium Battery Charger 2S AC230V
Rs 550.00Rs 790.00 -
ACS712 30A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 30A
- 5V power supply, on-board power indicator
Rs 550.00ACS712 30A Current Sensor Module
Rs 550.00 -
GPS Adhesive Type Antenna SMA
Quick Info :
- Frequency – 1559MHz-1609Mhz
-
Active antenna noise figure <1.5dB
-
Polarization -RHCP or Linear
-
Cable length – Max. 3m
Rs 550.00GPS Adhesive Type Antenna SMA
Rs 550.00 -
-
AC-DC 12V 1A SMPS Power Adapter
Quick Info :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 12V
- Output Current: 1A
- Plug Type : UK Plug
Rs 580.00AC-DC 12V 1A SMPS Power Adapter
Rs 580.00 -
TDA7297 15+15W Dual Bridge Amplifier Module
Quick Info:
- Working voltage: 6 to 18V
- Dual channel 15W+15W
- on-board dial potentiometer
Rs 590.00 -
OV7670 Camera Module
Quick Info :
- Resolution 640×480 VGA
- Flicker (50/60 Hz) auto detection
- Onboard regulator, only single 3.3V supply needed
Rs 590.00Rs 925.00OV7670 Camera Module
Rs 590.00Rs 925.00 -
X9C103S Digital Potentiometer Module
Quick Info :
- Simple 3 pin interface to control the resistance
- Supply voltage: 3V-5V
- Chip: X9C103S
- PCB board size: 2.7 * 1.3CM
- 10K span potentiometer.
Rs 590.00X9C103S Digital Potentiometer Module
Rs 590.00 -
MAX7219 8 Way Display Module
Quick Info :
- Eight 7-Segment LED Displays with 0.36″ high red digits
- LED displays mounted in sockets
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
- Can daisy-chain multiple modules together for larger displays
Rs 590.00MAX7219 8 Way Display Module
Rs 590.00 -
-
MQ-7 Gas Sensor Module for Carbon Monoxide
Quick Info :
- Power requirements : VCC – 5V±0.1
- DO output : TTL digital 0 and 1 (0.1 and 5V)
- AO output : 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detection Gas: Carbon Monoxide
Rs 590.00 -
2 Channel 5V DC Relay Module
Quick Info :
- Channel : 2
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 590.002 Channel 5V DC Relay Module
Rs 590.00 -
LCD 16X2 Keypad Shield
Quick Info :
- Operating Voltage: 5V
- 5 Push buttons.
- Left, Right, Up, Down and Select buttons
- Screen contrast adjustment
- Arduino Reset button
Rs 595.00LCD 16X2 Keypad Shield
Rs 595.00