Specifications :
Supply voltage: 3.6 – 6.0VDC
Operating current: 120mA max
Peak current: 150mA max
Fingerprint imaging time: < 1.0 seconds
Storage capacity: 162 templates
Rs 3,500.00
Quick Info:
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
Power via USB or External Source
Onboard 5V Regulator
6 I/O Pins
Rs 450.00
Quick Info :
CPU Speed : 20MHz
Program Memory Size : 8KB
RAM Memory Size : 512Byte
No. of Pins : 8 Pins
Rs 690.00
Quick Info :
Power Supply: 2.4V-3.6V (typically 3.0V)
Less current consumption: 0.12mA
Measuring Rang: 1-65535lx
Communication: I2C bus
Rs 590.00
Quick Info :
Stackable design, easy to plug into the ARDUINO development board.
Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
Rs 750.00
Quick Info :
Power : 3 to 5VDC
Pressure sensing range : 300- 1100 h Pa (9000m to -500m above sea level)
This board/chip uses I2C 7-bit address 0x77.
Rs 450.00
Quick info :
The fuse holder works with any 2-30 amp blade fuse.
The structure of the fuse holder provides extra protection against water and dust.
Rs 190.00
Quick Info :
A single module can drive a total of 8 * 8 dot matrix overcast
The module voltage: 5V
Module Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height)
Rs 1,650.00
Quick Info :
Perfect for experimentation and prototype work
Brings all 9 pins of a DB9 connector to screw terminal blocks
Adapter used for communication debug
9 pcs signal line was all lead out, name and number clearly labeled;
Rs 290.00
Quick info :
Operating Voltage Range: 3V – 6V
Torque: 0.2 – 0.5 Nm
No-load Speed: 5000 – 15000 RPM
Stall Current: 1 – 3 A
Rs 290.00
Quick Info :
Module Size: 2.8cm * 1.3cm
Applicable connector: 5.5 * 2.1mm
Power output interface: 2 channel VCC, 2 channel GND
Net Weight: 3.2g
Rs 100.00
Quick Info :
Max. Operating Voltage: 45 V
Min. Operating Voltage: 8.2 V
Max. Current Per Phase: 2.5 A
Alternatives for DRV8825 : A4988 , TMC2209
Rs 590.00
Quick Info
Supply voltage (typically): 3.3V
Battery not included
Battery : CR2032
Rs 790.00
Quick Info :
Temperature Range : -55°C to +85°C
Wire Interface : 1-wire interface
3.3 and 5V compatible
Rs 350.00
Quick Info :
Operating voltage : 2.3V – 5.5V
Battery not included
Battery : CR2032
Rs 590.00
Quick Info :
ENC28J60 Ethernet chips, SOP28 package
SPI Interface
Single Supply: +3.3 V
Rs 990.00
Quick Info:
Chip : ESP32-D0WDQ6
Wireless Technologies: Bluetooth, Wi-Fi
ADC Resolution: 12 bit
Interface Type: CAN, I2C, I2S, SDIO, SPI, UART
Maximum Clock Frequency: 240 MHz
Number of ADC Channels: 18 Channel
Number of I/Os: 34 I/O
Rs 2,690.00
Quick Info :
13 programmable GPIOs
Power
– 5v
– 3.3v
Digital interfaces:
– 1 × SPI
– 1 × UART
– 1 × I2C
– 1 × I2S
– 1 x LED PWM controller
Analog interfaces:
– 2 × 12-bit SAR ADCs, up to 6 channels
Rs 1,490.00