Quick Info :
Liquid pH Value Detection Sensor
Heating voltage: 5±0.2V
Working current: 5-10mA
Electrode Probe for Liquid pH Value Detection Sensor Module
PH range: 0-14 PH
Temperature range: 0-60℃
Rs 5,990.00Rs 7,100.00
Quick Info :
240*320 pixels
Suitable for an Uno (Atmega328P) or Mega (Atmega2560) based Arduinos (other chips are not supported)
Dimensions: 72.5 mm x 53 mm
Driver: ILI9320 or ILI9341 (or compatible with one of two)
Rs 2,250.00
Quick Info :
Input: 1-5VDC
Output voltage: 5V
Output Current: 500mA
Rs 390.00
Specifications :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 24V
Output Current: 3A
Plug Type : UK Plug
Rs 1,750.00
Quick Info :
Channels : 1
Input release voltage: 3.5 to 5V
Rated load voltage: 100V to 240V AC
Load current: 0.10 to 2A
Rs 600.00
Quick Info :
Arduino and Raspberry Pi compatible
4-key membrane switch pad has 5 pin female header on end of flat cable
White sticker on back can be peeled off for adhesive mounting
Rs 285.00
Quick Info :
Suitable for Arduino UNO and Mega Boards
IIC, Bluetooth, SD Card Interface
APC220 wireless RF module communication interface
RB URF v1.1 ultrasonic sensors interface
128 x 64 LCD parallel and 32 servo controller interface
Rs 550.00
Quick Info :
13 programmable GPIOs
Power
Digital interfaces:
Analog interfaces:
Rs 1,490.00
Quick Info :
Operates with a single 3.3 V Supply
Bus Pin ESD Protection Exceeds ±16 kV HBM
High Input Impedance Allows for Up to 120 Nodes on a Bus
Rs 690.00
Quick info :
Material: Plastic
Colour: Black
No. of Drawers: 33
Rs 4,950.00Rs 5,100.00
Quick Info :
Dual-Band 900/ 1800 MHz
GPRS multi-slot class 10/8GPRS mobile station class B
Compliant to GSM phase 2/2+
Recommended Power Supply – 5V 2A
Rs 2,850.00
Quick Info :
CPU Speed : 20MHzProgram Memory Size : 8KBRAM Memory Size : 512ByteNo. of Pins : 8 Pins
Rs 690.00
Quick Info :
Power Supply : 5V
Interface : Digital
Modulate Frequency : 38Khz
Size : 23.5mm x 21.5mm
Rs 120.00
Quick Info :
Max. Operating Voltage: 45 V
Min. Operating Voltage: 8.2 V
Max. Current Per Phase: 2.5 A
Alternatives for DRV8825 : A4988 , TMC2209
Rs 590.00
Quick Info :
Material: ABS
Dimension(LxWxH): 43.7×30.5×5.3mm
Response Frequency: 13.56MHz
Chip type: FM1108 Fudan Chip
Rs 100.00
Quick Info :
Support Card Type: Read-only ID card (EM4100, IM4001)
Support frequency: 125KHz
Reader Time: <0.2s
Read Range: 3-10cm
Rs 990.00
Quick Info :
Resolution 640×480 VGA
Flicker (50/60 Hz) auto detection
Onboard regulator, only single 3.3V supply needed
Rs 590.00Rs 925.00
Quick Info :
Microcontroller : ATmega2560
Operating Voltage : 5V
Input Voltage (recommended) : 7-12V
Input Voltage (limit) : 6-20V
Digital I/O Pins : 54 (of which 15 provide PWM output)
Analog Input Pins : 16
Rs 6,100.00
Quick Info :
Microcontroller: ATmega32u4
Operating Voltage: 5V
Digital I/O Pins: 20
PWM Channels: 7
Analog Input Channels: 12
Rs 2,990.00
Quick Info :
Product Name : JST-PH
Wire Type : 26AWG
Pitch: 2.00mm±0.05
Length: 15cm
Rs 80.00
Quick Info :
Input Voltage: 100-120V 60Hz, 220-230V 50Hz
Output Voltage: 24VDC
Output Current: 20A (max)
Dimensions (L X W X H) : 21 cm x 11 cm x 5 cm
Rs 5,690.00
Quick Info :
Dimensions: 100mm X 64mm X 47mm
Rs 260.00
Quick Info :
Dimensions: 85mm X 50mm X 21mm
Rs 180.00
Quick Info :
Dimensions: 100mm X 60mm X 27mm
Rs 200.00
Quick Info :
Operating Voltage: 12V DC
Module Dimensions: 5cm x 2.7cm x 2cm
Sensor: Photosensitive resistance module
Rs 650.00
Quick Info :
Power requirements : VCC – 5V±0.1
DO output : TTL digital 0 and 1 (0.1 and 5V)
AO output : 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detection Gas: Carbon Monoxide
Rs 590.00
