Quick Info :
Four 7-Segment LED Displays with 0.36″ high red digits
Built-in TM1637 LED Driver
2-wire serial interface for easy hookup to uC
3.3 and 5V compatible
Rs 390.00
Quick Info :
Input: 1-5VDC
Output voltage: 5V
Output Current: 500mA
Rs 390.00
Quick Info :
Input voltage: 7.5-28V
Output Voltage: 5V
Maximum Output current: 3A(2A typical)
Rs 390.00
Quick Info :
Drain Source Voltage (Vdss) : 55V
Continuous Drain Current (Id) : 49A
Power Dissipation (Pd) : 94W
Rs 390.00
Quick Info:
Interface: USB 2.0
Support system : Windows 98/98SE/ME/2000/XP/Vista
Receiving and Sending rang: Up to 20 m
Rs 400.00Rs 500.00
Quick Info :
Operating voltage range : DC 4.5-20V
Sensing distance : 3 meters
Delay Time : The default 8S + -30%
Rs 400.00
Quick Info:
Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
Power via USB or External Source
Onboard 5V Regulator
6 I/O Pins
Rs 450.00
Quick Info :
Power : 3 to 5VDC
Pressure sensing range : 300- 1100 h Pa (9000m to -500m above sea level)
This board/chip uses I2C 7-bit address 0x77.
Rs 450.00
Quick Info :
Maximum supply voltage (Vcc max) ±52.5V
Recommended supply voltage (Vcc) ±35V
Recommended Load resistance (RL) 8Ω
Rs 450.00
Quick Info :
Type of Control Channel: N -Channel
Maximum Power Dissipation (Pd): 280 W
Maximum Drain-Source Voltage |Vds|: 250 V
Maximum Gate-Source Voltage |Vgs|: 20 V
Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
Maximum Drain Current |Id|: 38 A
Rs 450.00
Quick Info :
Suitable for: 3.7V lithium rechargeable batteries, including 18650
Input: AC100-240V
Output: 4.2V/1A * 2
Rs 490.00Rs 690.00
Quick Info :
Dimensions: 175mm X 95mm X 30mm
Rs 490.00
Quick Info :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 5V
Output Current: 1A
Plug Type : UK Plug
Rs 500.00
Quick Info :
Suitable for Arduino UNO and Mega Boards
IIC, Bluetooth, SD Card Interface
APC220 wireless RF module communication interface
RB URF v1.1 ultrasonic sensors interface
128 x 64 LCD parallel and 32 servo controller interface
Rs 550.00
Quick Info :
5W Output at 10% (Total Harmonic Distortion
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 550.00
Quick Info :
The current sensor chip : ACS712
Current measuring : up to 30A
5V power supply, on-board power indicator
Rs 550.00
Quick Info :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 12V
Output Current: 1A
Plug Type : UK Plug
Rs 580.00
Quick Info:
Working voltage: 6 to 18V
Dual channel 15W+15W
on-board dial potentiometer
Rs 590.00
Quick Info :
Resolution 640×480 VGA
Flicker (50/60 Hz) auto detection
Onboard regulator, only single 3.3V supply needed
Rs 590.00Rs 925.00
Quick Info :
Simple 3 pin interface to control the resistance
Supply voltage: 3V-5V
Chip: X9C103S
PCB board size: 2.7 * 1.3CM
10K span potentiometer.
Rs 590.00
Quick Info :
Eight 7-Segment LED Displays with 0.36″ high red digits
LED displays mounted in sockets
Built-in MAX7219 LED Driver
SPI 3-wire serial interface for easy hookup to MCU
Can daisy-chain multiple modules together for larger displays
Rs 590.00
