Best Seller Items
-
-
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00
-
-
ATtiny85 Development Board
Quick Info:
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux)
- Power via USB or External Source
- Onboard 5V Regulator
- 6 I/O Pins
Rs 450.00ATtiny85 Development Board
Rs 450.00 -
BMP180 Digital Barometric Pressure Sensor
Quick Info :
- Power : 3 to 5VDC
- Pressure sensing range : 300- 1100 h Pa (9000m to -500m above sea level)
- This board/chip uses I2C 7-bit address 0x77.
Rs 450.00 -
STK4192 Stereo Amplifier IC
Quick Info :
- Maximum supply voltage (Vcc max) ±52.5V
- Recommended supply voltage (Vcc) ±35V
- Recommended Load resistance (RL) 8Ω
Rs 450.00STK4192 Stereo Amplifier IC
Rs 450.00 -
-
IRFP264 N Channel MOSFET
Quick Info :
- Type of Control Channel: N -Channel
- Maximum Power Dissipation (Pd): 280 W
- Maximum Drain-Source Voltage |Vds|: 250 V
- Maximum Gate-Source Voltage |Vgs|: 20 V
- Maximum Gate-Threshold Voltage |Vgs(th)|: 4 V
- Maximum Drain Current |Id|: 38 A
Rs 450.00IRFP264 N Channel MOSFET
Rs 450.00 -
Drill Collet Chuck Set
Quick info :
Material: Copper
Drill collar size: 0.5mm , 1.0mm , 1.5mm , 2.5mm , 3.0mm
Hole diameter: 2mm / 2.35mm / 3.17mm / 4.05mm / 5.0mmRs 450.00Drill Collet Chuck Set
Rs 450.00 -
USB to ESP8266 WIFI Module Adapter Board
Quick Info :
Rs 460.00USB to ESP8266 WIFI Module Adapter Board
Rs 460.00 -
-
-
18650 Lithium Battery Charger 2S AC230V
Quick Info :
- Suitable for: 3.7V lithium rechargeable batteries, including 18650
- Input: AC100-240V
- Output: 4.2V/1A * 2
Rs 490.00Rs 690.0018650 Lithium Battery Charger 2S AC230V
Rs 490.00Rs 690.00 -
-
-
-
Project Enclosure 175mm X 95mm X 30mm
Quick Info :
- Dimensions: 175mm X 95mm X 30mm
Rs 490.00Project Enclosure 175mm X 95mm X 30mm
Rs 490.00 -
AC-DC 5V 1A SMPS Power Adapter
Quick Info :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 5V
- Output Current: 1A
- Plug Type : UK Plug
Rs 500.00AC-DC 5V 1A SMPS Power Adapter
Rs 500.00 -
Arduino Compatible Sensor Shield
Quick Info :
- Suitable for Arduino UNO and Mega Boards
- IIC, Bluetooth, SD Card Interface
- APC220 wireless RF module communication interface
- RB URF v1.1 ultrasonic sensors interface
- 128 x 64 LCD parallel and 32 servo controller interface
Rs 550.00Arduino Compatible Sensor Shield
Rs 550.00 -
PAM8406 5W Audio Amplifier
Quick Info :
- 5W Output at 10% (Total Harmonic Distortion) THD with a 2Ω Load and 5V Power Supply at Class-D Mode
- 3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 550.00PAM8406 5W Audio Amplifier
Rs 550.00 -
ACS712 30A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 30A
- 5V power supply, on-board power indicator
Rs 550.00ACS712 30A Current Sensor Module
Rs 550.00 -
-
AC-DC 12V 1A SMPS Power Adapter
Quick Info :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 12V
- Output Current: 1A
- Plug Type : UK Plug
Rs 580.00AC-DC 12V 1A SMPS Power Adapter
Rs 580.00 -
TDA7297 15+15W Dual Bridge Amplifier Module
Quick Info:
- Working voltage: 6 to 18V
- Dual channel 15W+15W
- on-board dial potentiometer
Rs 590.00 -
OV7670 Camera Module
Quick Info :
- Resolution 640×480 VGA
- Flicker (50/60 Hz) auto detection
- Onboard regulator, only single 3.3V supply needed
Rs 590.00Rs 925.00OV7670 Camera Module
Rs 590.00Rs 925.00 -
X9C103S Digital Potentiometer Module
Quick Info :
- Simple 3 pin interface to control the resistance
- Supply voltage: 3V-5V
- Chip: X9C103S
- PCB board size: 2.7 * 1.3CM
- 10K span potentiometer.
Rs 590.00X9C103S Digital Potentiometer Module
Rs 590.00 -
MAX7219 8 Way Display Module
Quick Info :
- Eight 7-Segment LED Displays with 0.36″ high red digits
- LED displays mounted in sockets
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
- Can daisy-chain multiple modules together for larger displays
Rs 590.00MAX7219 8 Way Display Module
Rs 590.00 -
DS3231 Real Time Clock Module
Quick Info :
- Operating voltage : 2.3V – 5.5V
- Battery not included
- Battery : CR2032
Rs 590.00DS3231 Real Time Clock Module
Rs 590.00 -
-
MQ-7 Gas Sensor Module for Carbon Monoxide
Quick Info :
- Power requirements : VCC – 5V±0.1
- DO output : TTL digital 0 and 1 (0.1 and 5V)
- AO output : 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detection Gas: Carbon Monoxide
Rs 590.00 -
MAX30102 Pulse Oximeter & Heart-Rate Module
Quick Info :
- LED Peak Wavelength: 660nm/880nm
- LED Supply Voltage: 3.3~5V
- Interface: I2C Interface
- Operating Temperature Range: -40°C to +85°C
Rs 590.00 -
LCD 16X2 Keypad Shield
Quick Info :
- Operating Voltage: 5V
- 5 Push buttons.
- Left, Right, Up, Down and Select buttons
- Screen contrast adjustment
- Arduino Reset button
Rs 595.00LCD 16X2 Keypad Shield
Rs 595.00 -
1 channel 5V DC OMRON Solid State Relay Module
Quick Info :
- Channels : 1
- Input release voltage: 3.5 to 5V
- Rated load voltage: 100V to 240V AC
- Load current: 0.10 to 2A
Rs 600.00 -
-
LDR Light Sensitive Module with Relay
Quick Info :
- Operating Voltage: 12V DC
- Module Dimensions: 5cm x 2.7cm x 2cm
- Sensor: Photosensitive resistance module
Rs 650.00LDR Light Sensitive Module with Relay
Rs 650.00 -