Best Seller Items
-
-
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
LED 5mm Bulb Common Anode
Specification:
- 5mm Round Standard Directivity
- Color : Red, Blue, Green, White, Yellow
- UV Resistant : Eproxy
- Forward Current (IF): 30mA
- Forward Voltage (VF): 1.8V to 2.4V
Rs 4.00LED 5mm Bulb Common Anode
Rs 4.00
-
Infrared Obstacle Avoidance Sensor Module
Quick Info :
- Working Voltage : 3.3v to 5v
- Detectable Distance : 2 ~ 30cm,
- Detection angle : 35 °
- Comparator chip: LM393
Rs 180.00 -
MQ-4 Gas Sensor Module for Methane Gas
Quick Info :
- Power requirements : VCC – 5V±0.1
- DO output : TTL digital 0 and 1 (0.1 and 5V)
- AO output : 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detection Gas : Natural gas/Methane
- Detection Concentration : 200-10000ppm (Natural gas / Methane)
Rs 590.00MQ-4 Gas Sensor Module for Methane Gas
Rs 590.00 -
MQ-3 Gas Sensor Module for Alcohol
Quick Info :
- Power requirements: 5 VDC
- Current Consumption: 150mA
- DO output: TTL digital 0 and 1 ( 0.1 and 5V)
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol
Rs 590.00MQ-3 Gas Sensor Module for Alcohol
Rs 590.00 -
MQ-2 Gas Sensor Module for Combustible Gas
Quick Info :
- Operating Voltage is +5V
- Can be used to Measure or detect LPG, Alcohol, Propane, Hydrogen, CO and even methane
- Analog output voltage: 0V to 5V
- Digital Output Voltage: 0V or 5V (TTL Logic)
Rs 490.00 -
MQ-135 Gas Sensor Module for Air Quality
Quick Info :
- Operating Voltage: 2.5V to 5.0V
- Power consumption: 150mA
- Detect/Measure: NH3, Nox, CO2, Alcohol, Benzene, Smoke
- Typical operating Voltage: 5V
Rs 490.00MQ-135 Gas Sensor Module for Air Quality
Rs 490.00 -
INA226 Bi-Directional Current Module I2C
Quick Info :
- Senses Bus Voltages : 0 V to 36 V
- High-Side or Low-Side Sensing
- Reports Current, Voltage, and Power
- Operates from 2.7-V to 5.5-V Power Supply
Rs 900.00Rs 1,650.00INA226 Bi-Directional Current Module I2C
Rs 900.00Rs 1,650.00 -
AC Current Sensor 5A Module
Quick Info :
- Type : Sensor Brick
- Interface : 3PIN
- Power Supply : 5V
- Board Size : 30 × 24 × 1.6mm
Rs 950.00AC Current Sensor 5A Module
Rs 950.00 -
ACS712 5A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 5A
- 5V power supply, on-board power indicator
Rs 550.00ACS712 5A Current Sensor Module
Rs 550.00 -
ACS712 20A Current Sensor Module
Quick Info :
- The current sensor chip : ACS712
- Current measuring : up to 20A
- 5V power supply, on-board power indicator
Rs 550.00ACS712 20A Current Sensor Module
Rs 550.00 -
Capacitive Touch 8 Pad sensor TTP226
Quick Info :
- On-board TTP226 IC
- On-board 4 road level indicator.
- Working voltage: 2 V to 5.5 V DC
- PCB board size: 47.4 (mm) x 46 (mm)
Rs 495.00Capacitive Touch 8 Pad sensor TTP226
Rs 495.00 -
Capacitive Touch 4 Pad sensor TTP224
Quick Info :
- On-board TTP224 capacitive touch 4 key IC
- On-board 4 road level indicator.
- Working voltage: 2 V to 5.5 V DC
- PCB board size: 35(mm) x29 (mm).
Rs 320.00Capacitive Touch 4 Pad sensor TTP224
Rs 320.00 -
MAX30100 Pulse Oximeter and Heart Rate Sensor Module
Quick Info :
- Optical sensor: IR and red LED combined with a photodetector
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- 3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and high-performance analog front
Rs 490.00 -
MPU-6050 3 Axis Gyroscope + Accelerometer Module
Quick Info :
- Model: GY-521
- Chip: MPU-6050
- Power supply: 3.3V
- Communication mode: standard IIC communication protocol
Rs 790.00 -
ADXL345 3-Axis Accelerometer Module
Quick Info :
- 3V-6V DC Supply Voltage
- On-board LDO Voltage regulator
- Built-in Voltage level convertor (MOSFET based)
- It can be interface with 3.3V or 5V Microcontroller.
Rs 690.00ADXL345 3-Axis Accelerometer Module
Rs 690.00 -
5V 600MA USB Output charger step up Power Module
Quick Info:
- Input voltage: 0.9V – 5V;
- Output voltage: 5V;
- Output Amps : 600mA
Rs 250.00 -
LTC817 100W DC-DC Boost Voltmeter
Quick Info :
- Input voltage range：4-35VDC
- Input current：7A
- Output voltage range：3.5-35VDC
- Output current: 6A
- Output power: 100W
Rs 1,750.00LTC817 100W DC-DC Boost Voltmeter
Rs 1,750.00 -
3.3V Power Supply Module AMS1117
Quick Info :
- Input: DC 4.5V – 12V
- Output: 3.3V, 800mA
- Onboard AMS1117 chip
Rs 150.00 -
5V USB Output Charger Step-Down Power Module
Quick Info :
- Input voltage: DC 6-24V
- Output voltage: 5.1-5.2V
- Output current: 2A
Rs 250.00 -
XL6009 DC to DC Step up (Boost) Adjustable Module
Quick Info :
- Input voltage: 3 – 32V
- Output voltage: 5 – 35V (adjustable)
- Output current: Maximum output current 4A
- Adjustable potentiometer onboard for output voltage adjustment.
Rs 450.00Rs 550.00XL6009 DC to DC Step up (Boost) Adjustable Module
Rs 450.00Rs 550.00 -
XL4015 DC to DC Step down (Buck) Adjustable Module
Quick Info :
- Wide input voltage 8V ~ 35V
- Wide Output voltage 2V ~ 32V
- Max Output current 5A
- Alternative : LM2596 Buck
Rs 400.00Rs 550.00XL4015 DC to DC Step down (Buck) Adjustable Module
Rs 400.00Rs 550.00 -
MB102 Breadboard Power Supply Module 3.3V/5V
Quick Info :
- Input voltage: 7-12 V (DC) or 5V USB power supply.
- Output voltage: 3.3V and 5V can switch over.
- Maximum output current: <700 mA.
Rs 390.00 -
LM2596 DC to DC Step down (Buck) Adjustable Module
Quick Info :
- Input voltage 3.2V ~ 40V
- Output voltage 1.25V ~ 35V
- Output current 3A (max)
- Alternative : XL4015 Buck
Rs 290.00 -
LM 2596 DC to DC Step down (Buck) Adjustable Module with LED Display
Quick Info :
- Wide input voltage 5V ~ 40V
- Wide Output voltage 1.2V ~ 37V
- Max Output current 3A
Rs 1,190.00 -
150W DC-DC Step up (Boost) Converter
Quick Info :
- Input voltage: DC 10V-32V.
- Output voltage: DC 12V-35V (adjustable).
- Output current: 10A (MAX).
Rs 890.00150W DC-DC Step up (Boost) Converter
Rs 890.00 -
18650 Li-ion Battery Holder 2 Way
Quick Info :
- Series : 3.7v x 2 = 7.4v
- Color: Black
- Size: 7.6cm x 4cm x 1.9cm (LxWxH)
- 2X screw holes for board mounting
Rs 100.00Rs 150.0018650 Li-ion Battery Holder 2 Way
Rs 100.00Rs 150.00 -
18650 Li-ion Battery Holder
Quick Info :
- Battery type: 18650 Lithium-Ion battery
- Color: Black
- Size: 7.6cm x 4cm x 1.9cm (LxWxH)
- 2X screw holes for board mounting
Rs 60.0018650 Li-ion Battery Holder
Rs 60.00 -
18650 Lithium Battery Charger 2S AC230V
Quick Info :
- Suitable for: 3.7V lithium rechargeable batteries, including 18650
- Input: AC100-240V
- Output: 4.2V/1A * 2
Rs 490.00Rs 690.0018650 Lithium Battery Charger 2S AC230V
Rs 490.00Rs 690.00 -
TP4056 Lithium Battery Charger Module V2
Quick Info :
- Input Interface: Micro USB port
- Charging method: linear charge.
- A full charge voltage: 4.2V.
Rs 60.00Rs 190.00TP4056 Lithium Battery Charger Module V2
Rs 60.00Rs 190.00 -
Rs 1,250.00
LM2596/LM2577 Based Buck/Boost 15W Module
Rs 1,250.00 -
AC-DC 12V 5A SMPS Metal Casing
Quick info :
Input Voltage : AC100 ~ 240V 50/60 HZ
Output Voltage: DC12V
Output Current: 5ARs 1,490.00Rs 1,690.00AC-DC 12V 5A SMPS Metal Casing
Rs 1,490.00Rs 1,690.00 -
AC-DC 9V 2A SMPS Power Adapter
Specifications :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 9V
- Output Current: 1A
- Plug Type : UK Plug
Rs 790.00AC-DC 9V 2A SMPS Power Adapter
Rs 790.00 -
AC-DC 5V 2A SMPS Power Adapter
Quick Info :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 5V
- Output Current: 2A
- Plug Type : UK Plug
Rs 590.00AC-DC 5V 2A SMPS Power Adapter
Rs 590.00 -
AC-DC 12V 1.5A SMPS Open
Quick Info :
Input Voltage : AC100 ~ 240V 50/60 HZ
Output Voltage: DC12V
Output Current: 1.5ARs 450.00AC-DC 12V 1.5A SMPS Open
Rs 450.00