Quick Info :
Logic Type : NAND Gate
Number of Circuits : 3
Number of Inputs : 3
Voltage – Supply : 4.75V ~ 5.25V
Rs 65.00
Quick Info :
Input Voltage: 100-120V 60Hz, 220-230V 50Hz
Output Voltage: 12VDC
Output Current: 20A (max)
Rs 2,590.00
Quick Info :
The main chip: LM393, 801S
Working voltage: DC 5V
With analog and TTL level signal output signal output
Rs 690.00
Quick Info :
Low Freq. range – 820-960mHz
High Freq. range – 1710-1990mHz
Cable length – Max 3m
Connector Type – SMA
Rs 1,850.00
Quick Info :
Transistor Polarity : PNPCollector Emitter Voltage V(br)ceo : 60VDC Collector Current : 15APower Dissipation Pd : 115W
Rs 225.00
Quick Info :
Switch Type : General Purpose
Number of Outputs : 8
Output Configuration : High Side
Output Type : Bipolar
Voltage – Load : 5V ~ 50V
Current – Output (Max) : 500mA
Rs 180.00
Quick Info :
Multivibrator Type : Monostable / Astable
Output Current : 2.4mA
Supply Voltage Min : 4.5V
Supply Voltage Max : 15.5V
Rs 90.00
Quick Info :
Logic Type : Transceiver, Non-Inverting
Number of Elements : 1
Number of Bits per Element : 8
Output Type : 3-State
Rs 110.00
Quick Info :
Power requirements : VCC – 5V±0.1
DO output : TTL digital 0 and 1 (0.1 and 5V)
AO output : 0.1-0 .3 V (relative to pollution), the maximum concentration of a voltage of about 4V
Detection Gas : Natural gas/Methane
Detection Concentration : 200-10000ppm (Natural gas / Methane)
Rs 590.00
Quick Info :
Compatible with standard Arduino and Arduino Mega
Selectable interface between hardware serial port and software serial port
Support TCP/UDP protocols
Rs 4,100.00
Quick Info :
Size: 48mm x 29mm x 26mm.
Display color: Red & Blue LED (dual display).
Display: 0.28″ LED digital.
Operating voltage: DC 4.5 ~ 30V.
Measure voltage: DC 0 ~ 100V.
Measure current: 10A (direct measurement, built-in shunt).
Rs 690.00
Quick Info :
Realtek AMB82-Mini IoT AI Camera, Arduino Dev, 1080p Sensor, Multiple IO
Wi-Fi, Bluetooth, 1080p Sensor, H264/H265 Video, Multiple IO, Tensorflow-Lite AI
Equipped with Ultra-Low-Power AI Wi-Fi IP Camera SoC for rapid boot-up and low power consumption
Rs 19,500.00
Quick info :
WiFi controlled: Operated through a smartphone.
MPU6050 IMU for stability control.
All-in-one PCB: No need for additional 3D printed parts.
Easily upgradable: Can incorporate extra features like position hold or height hold using external modules.
Compact and lightweight.
Built-in battery charger.
Built-in USB interface for programming and debugging.
Rs 14,500.00
Quick Info :
Connection type : Normally Open
Actuation Distance (mm) : 15 ~ 25
Connecting cable length (cm) : 30
Rs 290.00
Quick Info :
Connector : Male to Female
1 Cable : Rs. 5
1 Set (40pcs) : Rs. 200
Rs 5.00
Quick Info :
Connector : Female to Female
1 Cable : Rs. 5
1 Set (40pcs) : Rs. 200
Rs 5.00
Quick Info :
Input Interface: Micro USB port
Charging method: linear charge.
A full charge voltage: 4.2V.
Rs 120.00Rs 190.00
Quick Info :
Input voltage: 7.5-28V
Output Voltage: 5V
Maximum Output current: 3A(2A typical)
Rs 390.00
Quick Info:
Operating Voltage: 3.6V to 5V Supply Current: 1.5mA Object Temperature Range: -70 ° C to 382.2 ° C Ambient Temperature Range: -40 ° C to 125 ° C
Rs 5,250.00
Specifications :
Body dimensions : 12mm X 12mm X 4mm + 4mm
Button dimensions : 4mm
Mounting Type : Through Hole
Rs 20.00
Quick Info :
Power Input : 3.0V-5.5V
Up to +26V target voltage
0.1 ohm 1% 2W current sense resistor
Rs 950.00Rs 1,150.00
Quick Info :
Output Voltage: DC5V (±0.1V)
Output Current: 700mA
Power: 3.5W
Rs 350.00
Quick Info :
Channel : 1
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 250.00Rs 390.00
Quick Info :
Capacitance:0.47uf （474）
Rated Voltage:100V(2A)
Rs 5.00
Quick Info :
Channel : 2
Coil sensitivity = 5VDC
Maximum Contact capacity = 250VAC/10VDC
Maximum Current capacity = 10A
Rs 590.00
Quick Info :
Incremental Encoder
Supply Voltage: 3-5V
Left/Right rotary output pulse, each circle with 20 pulse
Built in 10k resistor
Cycles per revolution (CPR): 20
Rs 350.00
