Best Seller Items
-
-
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00
-
IRFP460 500V N-Channel MOSFET
Quick Info :
- : N Channel
- : 500V
- : 20A
- : 0.27ohm
Rs 690.00IRFP460 500V N-Channel MOSFET
Rs 690.00 - : N Channel
-
-
-
Pulse & Heart Rate Sensor Module
Quick Info :
- Biometric Pulse Rate or Heart Rate detecting sensor
- Plug and Play type sensor
- Operating Voltage: +5V or +3.3V
- Current Consumption: 4mA
Rs 690.00Pulse & Heart Rate Sensor Module
Rs 690.00 -
GPS Adhesive Type Antenna SMA
Quick Info :
- Frequency – 1559MHz-1609Mhz
-
Active antenna noise figure <1.5dB
-
Polarization -RHCP or Linear
-
Cable length – Max. 3m
Rs 690.00GPS Adhesive Type Antenna SMA
Rs 690.00 -
Project Enclosure 115mm X 90mm X 55mm
Quick Info :
- Dimensions: 115mm X 90mm X 55mm
Rs 690.00Project Enclosure 115mm X 90mm X 55mm
Rs 690.00 -
801S Vibration Shock Sensor Sensitivity Adjustable
Quick Info :
- The main chip: LM393, 801S
- Working voltage: DC 5V
- With analog and TTL level signal output signal output
Rs 690.00 -
Precision Screw Driver Set 7 Pcs SW-993
Quick info :
Bit pattern:
“+” (Phillips) – 1.5 mm: This represents a Phillips head screwdriver bit, typically used for cross-head screws.
“-” (Flathead) – 2.5 mm: This indicates a flathead (slotted) screwdriver bit, used for straight slotted screws.
“★” (Torx) – 0.8 mm: This represents a Torx screwdriver bit, used for star-shaped screw heads, commonly found in electronics.
“Y” (Tri-Wing) – 0.6 mm: This denotes a Tri-Wing screwdriver bit, often used for specialized screws in electronic devices like gaming consoles.Rs 690.00Precision Screw Driver Set 7 Pcs SW-993
Rs 690.00 -
Inductive Proximity Sensor PNP PL-05P
Quick Info :
- Sensing distance : 5mm
- Operating voltage : 10 – 30 VDC
- Response frequency : 800Hz
- Output method : PNP, 150mA load
Rs 690.00Inductive Proximity Sensor PNP PL-05P
Rs 690.00 -
2SA1943 PNP Bipolar Transistor
Quick Info :
- Transistor Type: PNP
- Power Dissipation (Pd): 150W
- Collector Current (Ic): 15A
Rs 690.002SA1943 PNP Bipolar Transistor
Rs 690.00 -
2SC5200 NPN Bipolar Transistors
Quick Info :
- Transistor Type: NPN
- Collector-Emitter Breakdown Voltage (Vceo): 230V
- Power Dissipation (Pd): 180W
- DC Current Gain (hFE@Ic,Vce): 70@5A,4V
- Collector Current (Ic): 17A
Rs 690.002SC5200 NPN Bipolar Transistors
Rs 690.00 -
16340 Lithium Ion Battery
Quick info :
- Battery Type: Lithium Ion
- Model: 16340
- Capacity: 1400mAh
Rs 690.0016340 Lithium Ion Battery
Rs 690.00 -
Digital Audio Power Amplifier Module HW-710
Quick info :
- Output Power: 2x50W (stereo mode) or 100W (mono mode)
- Frequency Response: 20Hz to 20kHz
- Signal-to-Noise Ratio (SNR): ≥100dB
- Chip: TPA3116D2
- Power Supply Voltage: 12-24V DC
Rs 690.00 -
TDA7297 15+15W Dual Bridge Amplifier
Quick Info :
- Supply Voltage – Max: 18 V
- Supply Voltage – Min: 6.5 V
- Gain: 32 dB
- Number of Channels: 2
- Channel Operating Supply Current: 2 A
Rs 720.00TDA7297 15+15W Dual Bridge Amplifier
Rs 720.00 -
OLED 128X64 0.96 inch Display Module
Quick Info :
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00OLED 128X64 0.96 inch Display Module
Rs 750.00Rs 990.00 -
-
W1209 Digital Temperature Controller Module
Quick Info :
- Temperature range: -50 -110°C
- Dimensions: 48.5 * 40mm
- Temperature control mode: ON / OFF
- Control accuracy: 0.1 °C
- Output voltage: DC 12V
Rs 750.00 -
USB to TTL Converter CP2102 (5 Pin)
Quick Info :
- Standard USB type A male and TTL 5 pin connector.
- 5 pins for 3.3V, TXD, RXD, GND & 5V.
- Baud rates: 300 bps to 1.5 Mbps
Rs 790.00USB to TTL Converter CP2102 (5 Pin)
Rs 790.00 -
-
4 channel 5V DC Relay Module
Quick Info :
- Channel : 4
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 790.004 channel 5V DC Relay Module
Rs 790.00 -
-
AC-DC 9V 2A SMPS Power Adapter
Specifications :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 9V
- Output Current: 1A
- Plug Type : UK Plug
Rs 790.00AC-DC 9V 2A SMPS Power Adapter
Rs 790.00 -
-
AC-DC 12V 2A SMPS Power Adapter
Specifications :
- Input Voltage : AC 100 ~ 240V 50/60 HZ
- Output Voltage: DC 12V
- Output Current: 2A
- Plug Type : UK Plug
Rs 790.00AC-DC 12V 2A SMPS Power Adapter
Rs 790.00 -
HDMI to Micro HDMI 1.5m
Quick Info :
- Full HD resolution supports 480i, 480p, 720p, 1080i, and 1080p
- HDMI version 1.4
- Length : 1.5 meters
Rs 790.00HDMI to Micro HDMI 1.5m
Rs 790.00 -
AS5600 Magnetic Encoder Module V2
Quick Info :
- Supply Voltage : 3-3.6 and 4.5-5.5
- Temperature Range [°C] : -40 to +125
- Output : Analog out / PWM / I²C
- Interface : I²C
- Resolution [bit]: 12
Rs 790.00 -
MAX98357 I2S 3W Amplifier Module
Quick Info :
- Operating voltage: 2.7 – 5.5 V
- The I2S audio input supports 3.3V and 5V levels
- 3.2W output at 10% THD,
- Speaker Spec : 4 Ω impedance of the speaker and 5 V power supply
Rs 790.00MAX98357 I2S 3W Amplifier Module
Rs 790.00 -
CBB60 Motor AC Running Capacitor 20uF
Quick info:
- Capacitance: 20uF
- Operating Voltage: 450V AC
- Rated Frequency: 50/60 Hz
- Operating Temperature: -40°C to +85°C
- Tolerance: 5%
Rs 790.00CBB60 Motor AC Running Capacitor 20uF
Rs 790.00 -
MAX7219 8 X 8 LED Dot Matrix Module
Quick Info :
- A single module can drive 8 by 8 common cathodes
- Module Operating voltage: 5V.
- Module size: 5 cm long X 3.2 cm wide X 1.5 cm high
- Module with input and output interfaces, supports multiple modules cascade
- Led colour:Red
Rs 800.00MAX7219 8 X 8 LED Dot Matrix Module
Rs 800.00 -
AD828 Stereo Dynamic Microphone Preamplifier Module
Quick Info :
- Main Chip: AD828
- Working Voltage: DC 3.7-15V
Rs 800.00 -
-
HMC5883L GY-271 Electronic Compass Module
Quick Info :
- Power Requirements: 2.7 to 6.5 VDC
- Communication Interface: I²C (up to 400 kHz)
- Operating temperature: -22 to +185 °F to +85 °C)
- Dimensions: 0.73 x .65 in ( 1.8 x 1.7 cm)
Rs 850.00 -
-
RGB Pixel LED Controller Driver WS2811 WS2812 UCS1903
Quick Info :
- Support WS2811 WS2812B LED LED lights. It can’t control SK6812 RGBW and regular RGB LED lights without a driver IC. 300+ color modes include rainbow, wave, breathing, strobing, gradual change, color cycle, comet, static, fading, and chasing. Color-changing speed and brightness are adjustable.
Rs 850.00 -
150W DC-DC Step up (Boost) Converter
Quick Info :
- Input voltage: DC 10V-32V.
- Output voltage: DC 12V-35V (adjustable).
- Output current: 10A (MAX).
Rs 890.00150W DC-DC Step up (Boost) Converter
Rs 890.00