Infrared/IR
Infrared sensors: IR obstacle and line-tracking modules, TCRT5000, QTR-8RC arrays, Sharp IR distance, IR remote receivers and MLX90614 contactless thermometer.
-
IR LED 5mm Receiver 850nm
Quick Info :
- Wavelength Sensitivity : 850nm
- Case Material : Black epoxy for enhanced IR filtering
- Package Type : ,5mm
- Operating Voltage : 2.7V – 5.5V
- Current Consumption : ≤1.5mA (typical)
- Reception Distance : 10m – 30m (depends on model)
- Carrier Frequency : 30kHz – 56kHz
Rs 30.00IR LED 5mm Receiver 850nm
Rs 30.00 -
IR Receiver VS1838B
Quick Info :
- Wavelength Sensitivity : 850nm – 950nm (typically 940nm)
- Operating Voltage : 2.7V – 5.5V
- Current Consumption : ≤1.5mA (typical)
- Reception Distance : 10m – 30m (varies by model)
- Carrier Frequency : 30kHz – 56kHz
Rs 40.00IR Receiver VS1838B
Rs 40.00 -
Infrared Obstacle Avoidance Sensor Module
Quick Info :
- Working Voltage : 3.3v to 5v
- Detectable Distance : 2 ~ 30cm,
- Detection angle : 35 °
- Comparator chip: LM393
Rs 180.00 -
TCRT5000 Line Following/ Optical Sensor Module
Quick Info :
- Working voltage of 3.3V to 5V
- Output form: digital switch output (0 and 1)
- Using infrared reflection sensors TCRT5000
- Test reflection distance: 1mm to 25mm
Rs 180.00Rs 270.00TCRT5000 Line Following/ Optical Sensor Module
Rs 180.00Rs 270.00 -
HX1838 IR Remote Control Module
Quick Info:
- Receiver IC : HX1838
- Supply Voltage : 2.7V – 5.5V
- Carrier Frequency : 38 kHz
- Interface : 3-Pin (VCC, GND, OUT)
- Protocol Support : NEC, RC5, RC6 and others
Rs 180.00Rs 200.00HX1838 IR Remote Control Module
Rs 180.00Rs 200.00 -
KY-005 IR Transmitter Module
Quick Info :
- Operating Voltage: 5V
- Current Consumption: 30-60mA
- Frequency: 38kHz
- Wavelength: 940nm
Rs 190.00Rs 220.00KY-005 IR Transmitter Module
Rs 190.00Rs 220.00 -
KY-033 Line Tracking Sensor Module
Quick Info:
- Operating Voltage : 3.3V – 5V DC
- Output Type : Digital
- Detection Method : Infrared reflectance
- Detection Distance : 1mm – 8mm
- Sensitivity Adjust : Yes, onboard potentiometer
- Compatibility : Arduino, Raspberry Pi, ESP32
- Dimensions : 32mm x 14mm
Rs 220.00Rs 250.00KY-033 Line Tracking Sensor Module
Rs 220.00Rs 250.00 -
KY-010 Light Break Sensor Module
Quick Info:
- Operating Voltage : 3.3V – 5V DC
- Output Type : Digital
- Detection Method : Infrared optical interrupt
- Slot Width : ~5mm
- Onboard Indicator : Yes
- Compatibility : Arduino, Raspberry Pi, ESP32
- Dimensions : 32mm x 14mm
Rs 240.00Rs 290.00KY-010 Light Break Sensor Module
Rs 240.00Rs 290.00 -
Infrared Speed Sensor Module
Quick Info :
- Working voltage: 3.3V~5V
- The output form: Digital switching outputs. (0 and 1)
- Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00Infrared Speed Sensor Module
Rs 250.00 -
KY-032 IR Obstacle Avoidance Sensor Module
Quick Info:
- Sensor Type : IR Obstacle Avoidance
- Output Type : Digital (HIGH / LOW)
- Operating Voltage : 3.3V – 5V DC
- Detection Range : 2cm – 10cm [20-40cm Ideal conditions]
- Sensitivity Adjustment : Dual Potentiometer
- Enable Pin : Yes (active LOW)
- Pins : 4 (VCC, GND, OUT, EN)
Rs 260.00Rs 300.00KY-032 IR Obstacle Avoidance Sensor Module
Rs 260.00Rs 300.00 -
HC-020K Photoelectric Wheel Encoder Sensor Kit
Quick Info :
- Sensor Type: Infrared photoelectric encoder
- Resolution: 20 pulses per revolution
- Output: Digital TTL pulse
- Voltage: 3.3V – 5V DC
- Pins: VCC, GND, OUT (3-pin)
- Disk Slots: 20 slots
- Compatible: Arduino, ESP32, Raspberry Pi
Rs 420.00Rs 500.00HC-020K Photoelectric Wheel Encoder Sensor Kit
Rs 420.00Rs 500.00 -
4-Way Infrared Line Tracking Module
Quick Info:
- Operating Voltage : 3.3V – 5V DC
- Output Type : Digital (4 channels)
- Detection Method : Infrared reflectance
- Number of Sensors : 4
- Detection Distance : 1mm – 8mm
- Sensitivity Adjust : Yes, onboard potentiometer
- Dimensions : 75mm x 16mm
Rs 590.00Rs 650.004-Way Infrared Line Tracking Module
Rs 590.00Rs 650.00 -
IR Break Beam Sensor 5mm LED
Quick Info :
- Type: IR Transmitter + Receiver Pair
- LED Size: 5mm
- Detection Range: Approx 50cm
- Voltage: 3.3-5V DC
- Output: Digital Signal
Rs 630.00Rs 750.00IR Break Beam Sensor 5mm LED
Rs 630.00Rs 750.00 -
Infrared Encoder/Decoder Module
Quick Info :
- Power Supply Voltage : 5V
- Size : 27 * 17mm
- Communication Type : serial port communication (TTL level)
Rs 650.00Rs 750.00Infrared Encoder/Decoder Module
Rs 650.00Rs 750.00 -
Line Tracking Infrared Sensor 5 Channel TCRT5000
Quick Info :
- Sensor Type: Infrared reflective sensor
- Sensor Model: TCRT5000
- Number of Channels: 5
- Operating Voltage: 3.3 V – 5 V
Rs 680.00Rs 850.00Line Tracking Infrared Sensor 5 Channel TCRT5000
Rs 680.00Rs 850.00 -
Reflectance Sensor Array QTR-8RC
Quick Info :
- Dimensions: 2.95″ x 0.5″ x 0.125″ (without header pins installed)
- Operating voltage: 3.3-5.0 V
- Supply current: 100 mA
- Output format: 8 digital I/O-compatible signals that can be read as a timed high pulse
Rs 730.00Rs 1,290.00Reflectance Sensor Array QTR-8RC
Rs 730.00Rs 1,290.00 -
Sharp GP2Y0A51SK0F IR Sensor 2-15cm
Quick Info:
- Detection Range : 2cm to 15cm
- Output Type : Analog Voltage
- Operating Voltage : 4.5V to 5.5V
- Connector Type : 4-Pin JST ZH
Rs 1,450.00Rs 1,750.00Sharp GP2Y0A51SK0F IR Sensor 2-15cm
Rs 1,450.00Rs 1,750.00 -
GP2Y0A21YK0F Sharp IR Analog Distance Sensor
Specifications :
- Operating voltage : 4.5 V to 5.5 V
- Output type : Analog Voltage
- Distance measuring range : 10 cm to 80 cm (4″ to 32″)
Rs 1,990.00GP2Y0A21YK0F Sharp IR Analog Distance Sensor
Rs 1,990.00
Sensors that use infrared light: obstacle avoidance modules, TCRT5000 line-following sensors and 5-channel arrays, the QTR-8RC reflectance array, speed and wheel encoder sensors, the Sharp GP2Y0A21 analog distance sensor, KY-005 IR transmitters, KY-022 and 38kHz IR receivers for TV remotes, and the MLX90614 contactless temperature sensor.
Which IR sensor?
For a line-following robot, use TCRT5000 sensors or an array pointed at the floor. For detecting nearby obstacles, an IR obstacle module. To control a project with a TV remote, a 38kHz receiver. For measuring temperature without touching, the MLX90614.













