Quick Info :
Complies with wireless 802.11n standards
Frequency band: 2.4~2.4835GHz
Data rate up to 150Mbps
Rs 1,250.00Rs 1,450.00
Quick Info :
Operating voltage:5V (supplied from the Arduino Board)
Ethernet Controller: W5500 with internal 32K buffer
Connection speed: 10/100Mb
Connection with Arduino on SPI port
Rs 4,390.00
Quick Info :
Voltage: 3-3.6V (recommended 3.3V) V.
Maximum output power: +20dBm.
Power-down mode current: 4.2uA.
Operating Range: 1Km
Rs 950.00
Quick Info :
It can be used with NRF24L01 wireless module
Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
Allows for easy connection to nRF24L01+ modules
Small power on SMD LED indicator
Rs 250.00
QUICK OVERVIEW
Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
Built-in hardware CRC error detection, Multipoint communication address control.
Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
Built-in 2.4Ghz antenna
Built-in voltage regulator
Rs 490.00
Quick Info :
Bluetooth v2.0+EDR
2.4GHz ISM band frequency
Default baudrate: 9600
Power supply: 3.6V to 6V DC
Rs 1,090.00Rs 1,350.00
Quick Info:
Bluetooth v2.0+EDR
2.4GHz ISM band frequency
Supported baud rate: 9600 (default), 19200,38400, 57600, 115200, 230400, 460800.
Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps
Power supply: 3.6V to 6V DC
Rs 1,090.00Rs 1,350.00
Quick Info :
802.11 b/g/n
Operating Voltage: 3.3V
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Rs 490.00Rs 590.00
Quick Info :
ENC28J60 Ethernet chips, SOP28 package
SPI Interface
Single Supply: +3.3 V
Rs 990.00
Quick Info :
Transmitter Operating Voltage: +5V only
Transmitter Operating current: 9mA to 40mA
Operating frequency: 433 MHz
Transmission Distance: 3 meters (without antenna) to 100 meters (maximum)
Rs 390.00
Quick Info :
MFRC522 chip based board
Operating frequency: 13.56MHz
Supply Voltage: 3.3V
Current: 13-26mA
Rs 360.00Rs 430.00
Quick info:
Chip: PIC18F25K80 with ELM327 V1.5
Connection: Bluetooth 3.0 or WiFi (variants)
Range: 50 feet wireless
Database: 3000+ trouble codes
Compatibility: Android, iOS (WiFi), Windows
Rs 4,550.00Rs 4,900.00
Quick Info :
Module: SIM800C GSM/GPRS
Bands: 850/900/1800/1900MHz (Quad-Band)
Size: 23mm x 25mm
Data Speed: 85.6 kbps GPRS
Bluetooth: v3.0
Power: 3.7V – 4.2V
Antenna: Spring/Coil included
SIM: Micro SIM push-pull slot
Rs 1,450.00Rs 1,650.00
Quick Info :
Type: LoRa Transceiver Module
Frequency: 868/915 MHz
Interface: UART
Voltage: 3.3V
Applications: IoT, Home Security
Rs 6,900.00Rs 7,900.00
Quick info:
Wireless Bluetooth Connectivity – Connects to Android, Windows, and some iOS devices for hassle-free diagnostics.
Reads & Clears Error Codes (DTCs) – Quickly diagnose and fix engine issues.
Supports Multiple Protocols – Works with ISO 9141-2, KWP2000, CAN Bus, and more.
Works with Popular Apps – Compatible with Torque, Car Scanner, FORScan,
Cost-Effective Diagnostic Tool – Saves money on mechanic visits by allowing DIY troubleshooting.
Rs 890.00Rs 990.00
Quick info:
Plug-and-Play: Easy setup with USB 2.0 interface
Compatibility: ISO 14443 Type A/B, ISO 15693, and NFC cards
Data Transfer speed: 106 kbps, 212 kbps, and 424 kbps
Power Supply: 5V DC
Rs 2,290.00
Quick info :
Model: A9
Communication: GSM/GPRS
Frequency Bands: 850/900/1800/1900MHz
SIM Card Type: Micro SIM
Supported Protocols: TCP/UDP/HTTP/FTP/SMTP/MQTT
Power Supply Voltage: 3.4V – 4.4V
Rs 3,950.00
Quick Info :
Stackable design, easy to plug into the ARDUINO development board.
Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly.
Coupled with the XBee module, you can achieve two or more sets of communication between Arduino or Arduino and PC Communications.
Rs 750.00
