Motor Driver
Motor drivers: L298N, L293D, TB6612FNG and BTS7960 for DC motors, A4988, DRV8825, TMC2209 and TB6600 stepper drivers, PCA9685 servo driver and MOSFET switches.
-
AJL-6860-RTR 60A Waterproof Brushed ESC 2-3S
Quick Info:
- Model : AJL-6860-RTR
- Continuous Current : 60A
- Peak Current : 480A
- BEC Output : 6V / 3A
- Battery : 2S–3S LiPo / 5–9 cell NiMH
- Supported Motors : 540 / 550 / 750 brushed
- Operating Modes : 3 (selectable)
- Waterproof : Yes
- Thermal Protection : 50% power @ 100°C
- Dimensions : 37.5 × 31.5 × 20mm
Rs 4,350.00AJL-6860-RTR 60A Waterproof Brushed ESC 2-3S
Rs 4,350.00 -
L9110S H-Bridge Stepper Motor Driver Module
Quick Info:
- Operating Voltage : 2.5V – 12V DC
- Output Current : 800mA continuous / 1.5A peak
- Channels : 2
- Supported Motors : DC / 4-wire Stepper
- PWM Frequency : Up to 8KHz
- Dimensions : 28mm × 22mm
Rs 200.00Rs 250.00L9110S H-Bridge Stepper Motor Driver Module
Rs 200.00Rs 250.00 -
Electronic Speed Controller 20A Bidirectional
Quick Info:
- Continuous Current : 20A
- Motor Type : Brushed DC
- Control : Bidirectional (Forward / Reverse)
- Signal Interface : PWM
- Operating Voltage : 6V – 16V
Rs 2,980.00Rs 3,000.00Electronic Speed Controller 20A Bidirectional
Rs 2,980.00Rs 3,000.00 -
Brushless Motor Driver Controller Board for Hard Drive BLDC Motor DC 7-12V
Quick Info :
- Input Voltage: DC 7V – 12V
- Current: ≤1.2A working / 1.5A max
- Motor Support: 3-wire & 4-wire BLDC
- Speed Control: Voltage-regulated
- Max Speed: ~10,000 RPM
- Detection: Auto 3/4-wire recognition
- Protection: Reverse polarity, over-current
- Size: 63mm × 45mm
Rs 980.00Rs 1,100.00Brushless Motor Driver Controller Board for Hard Drive BLDC Motor DC 7-12V
Rs 980.00Rs 1,100.00 -
Dual H-Bridge DC Motor Driver Module 2-10VDC MX1616
Quick Info :
- Model: MX1616 Dual Motor Driver
- Channels: 2 independent H-bridges
- Voltage: 2V – 10V DC
- Current: 1.5A continuous per channel
- Control: PWM + Direction inputs
- Logic: 3.3V/5V compatible
- Protection: Over-current, thermal shutdown
- Compatible: Arduino, Raspberry Pi, ESP32
Rs 200.00Rs 250.00Dual H-Bridge DC Motor Driver Module 2-10VDC MX1616
Rs 200.00Rs 250.00 -
ZK-SMC01 Stepper Motor Driver
Quick Info :
- Type: Stepper Motor Controller
- Power: DC 5-30V
- Display: HD LCD + Encoder
- Modes: 9 Pre-programmed
- Micro-step: Up to 1/128
- Note: Driver required (sold separately)
Rs 4,400.00Rs 4,900.00ZK-SMC01 Stepper Motor Driver
Rs 4,400.00Rs 4,900.00 -
DC Motor Speed PWM Controller 6-90V 15A
Quick Info :
- Type: PWM Motor Speed Controller
- Voltage: 6-90V DC
- Current: 15A Max
- Control: Potentiometer
- Protection: Overcurrent & Thermal
Rs 1,250.00Rs 1,550.00DC Motor Speed PWM Controller 6-90V 15A
Rs 1,250.00Rs 1,550.00 -
Electronic Speed Controller 20A / 30A
Quick Info :
- Available Variants : 20A / 30A
- Motor Type : Brushed DC
- Control Signal : PWM
- Operating Voltage : 6V – 12V DC
- Protection : Over-Current, Over-Temp, Low Voltage
- Compatibility : RC Receivers & Arduino
Price range: Rs 1,450.00 through Rs 1,500.00 -
TB6612FNG Dual DC Stepper Motor Driver Module
Quick Info :
- Voltage Range : Logic 2.7-5.5 V / Motor up to 15 V
- Channels : 2
- Continuous Current : 1.2 A per channel
- Peak Current : 3.2 A per channel
Rs 490.00Rs 550.00TB6612FNG Dual DC Stepper Motor Driver Module
Rs 490.00Rs 550.00 -
Electronic SCR 230V AC Voltage Regulator 4000W
Quick Info :
- Type: SCR Voltage Regulator
- Input Voltage: AC 220V
- Max Power: 4000W
- Max Current: 20A
- Applications: Dimming, Speed Control, Temperature Control
Rs 1,800.00Rs 2,200.00Electronic SCR 230V AC Voltage Regulator 4000W
Rs 1,800.00Rs 2,200.00 -
Mini Motor Drive Shield Expansion Board L293D Module
Quick Info :
- Controls 2 DC motors or 1 stepper motor simultaneously
- Wide voltage range: 4.5V to 25V input supply
- 600mA continuous, 1.2A peak current per channel
- Built-in overtemperature and overcurrent protection
- PWM speed control and bidirectional rotation
- Direct compatibility with Arduino UNO/MEGA 2560
- Compact size: 40 x 35.5 x 12.5mm, weighs only 10g
Rs 400.00 -
Isolated MOSFET Driver Module
Quick Info :
- Optocoupler isolation protects control circuits
- Wide input range: 3-20V PWM signals
- High output capacity: DC 3.7-27V, up to 10A
- PWM frequency control: 0-20KHz for speed/brightness adjustment
- Compatible with motors, LED strips, pumps, solenoid valves
- Compact lightweight design at only 15g
- Perfect for Arduino and microcontroller projects
Rs 490.00Isolated MOSFET Driver Module
Rs 490.00 -
Double BTS7960 43A Motor Driver Module
Quick Info :
- Input Voltage: 6 ~ 27V
- Driver: Dual BTS7960 H Bridge Configuration
- Peak current: 43-Amp
Rs 1,250.00Double BTS7960 43A Motor Driver Module
Rs 1,250.00 -
TB6600 42/57/86 Stepper Motor Driver Controller
Quick Info :
- Compatible Motors: Nema 17/23/34(42/57/86 Stepper Motor)
- 9V-42V DC power supply;
- H-bridge bipolar constant-phase flow-driven;
- maximum output current of 4.0A eight optional
Rs 2,050.00Rs 2,200.00TB6600 42/57/86 Stepper Motor Driver Controller
Rs 2,050.00Rs 2,200.00 -
TMC2209 Ultra Silent Stepper Motor Driver
Quick Info :
- Operating Voltage : 4.75V to 28V
- Continuous Current : 2A RMS
- Peak Current : 2.8A
- Microstepping : Up to 1/256
- Interface : STEP/DIR & UART
Rs 1,450.00Rs 3,250.00TMC2209 Ultra Silent Stepper Motor Driver
Rs 1,450.00Rs 3,250.00 -
IRF520 MOSFET Driver Module
Quick Info :
- Voltage: 3.3V, 5V
- Output load voltage :0-24V
- Output load current: <5A (1A need to add more heat sink)
Rs 180.00Rs 250.00IRF520 MOSFET Driver Module
Rs 180.00Rs 250.00 -
SCR 230V AC Voltage Regulator Module 2000W
Quick Info:
- Control Type : Bidirectional SCR (Thyristor)
- Input Voltage : AC 220-230V, 50/60Hz
- Output Voltage : AC 50V to 220V, adjustable
- Maximum Power : 2000W (resistive load)
- Maximum Current : Up to 25A
Rs 950.00Rs 1,250.00SCR 230V AC Voltage Regulator Module 2000W
Rs 950.00Rs 1,250.00 -
ULN2003 Stepper Motor Driver Board Module
Quick Info :
- High Voltage Outputs: 50V
- Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
- Relay Driver Applications
Rs 230.00Rs 390.00ULN2003 Stepper Motor Driver Board Module
Rs 230.00Rs 390.00
A microcontroller pin can’t power a motor, so a driver sits in between. For DC motors: L298N, L293D and TB6612FNG dual drivers, the 43A BTS7960 for big motors, PWM speed controllers and MOSFET switch modules. For steppers: A4988, DRV8825, the quiet TMC2209 and the TB6600 for NEMA 23. Also the ULN2003 board for 28BYJ-48 steppers and the PCA9685 16-channel servo driver.
Choosing a driver
Match the driver’s current rating to the motor’s stall current, with margin, and its voltage range to your supply. The L298N is easy to start with but wastes power as heat. The TB6612FNG is more efficient for small motors. For stepper motors in 3D printers and CNC, set the driver’s current limit to the motor’s rating before running it.