Quick Info :
Operating Voltage: 5V
Backlight and Contrast is adjusted by potentiometer
Compatible for 16×2 , 16×4 and 20×4 LCD
Rs 250.00Rs 390.00
Quick Info :
Operating Voltage is 4.7V to 5.3V
Current consumption is 1mA without backlight
Alphanumeric LCD display module, meaning can display alphabets and numbers
Consists of two rows and each row can print 16 characters.
Compatible with LCD to I2C Adapter Board
Rs 460.00Rs 490.00
Quick Info :
OLED Driver IC: SSD1306
Resolution: 128 x 64
Visual Angle: >160°
Input Voltage: 3.3V ~ 6V
Compatible I/O Level: 3.3V, 5V
Rs 750.00Rs 990.00
Quick Info :
Range: 0-100V DC
Display: 0.28″ Red LED
Accuracy: ±1%
Wiring: Three-wire (separate power & signal)
Application: Battery/Solar/Automotive monitoring
Rs 280.00Rs 320.00
Quick Info :
Display Size: 1.3 inches
Matrix: 8 × 8 (64 LEDs)
Driver IC: MAX7219
Operating Voltage: 5 V
A single module can drive 8 x 8 common cathodes
Rs 480.00Rs 600.00
Quick Info :
Interface : I2C
I2C Address : 0x3F
Supply voltage : 5V
Contrast Adjust : Through Potentiometer
Backlight : Blue
Rs 900.00Rs 1,100.00
Quick Info :
True TFT display with 262,144 vibrant colors
4-wire SPI interface – minimal pin usage
Works with 3.3V and 5V systems
Built-in microSD card slot for bitmap storage
Compatible with Arduino, Raspberry Pi, ESP32
Controllable LED backlight
Compact 34.5×58.0mm PCB size
Rs 1,490.00
Quick Info :
Type: OLED Display Module
Size: 1.3 inches
Resolution: 128×64 pixels
Interface: I2C (SDA/SCL)
Voltage: 3.3V – 5V
Rs 850.00Rs 950.00
Quick Info :
Voltage Range: DC 5 V – 120 V
Display: 3-digit LED
Accuracy: ±1%
Connection: 2-wire
Cutout Size: 45 mm x 26 mm
Rs 550.00Rs 700.00
Quick Info :
Size: 48mm x 29mm x 26mm.
Display color: Red & Blue LED (dual display).
Display: 0.28″ LED digital.
Operating voltage: DC 4.5 ~ 30V.
Measure voltage: DC 0 ~ 100V.
Measure current: 10A (direct measurement, built-in shunt).
Rs 950.00Rs 1,100.00
Quick Info :
Eight 7-Segment LED Displays with 0.36″ high red digits
LED displays mounted in sockets
Built-in MAX7219 LED Driver
SPI 3-wire serial interface for easy hookup to MCU
Can daisy-chain multiple modules together for larger displays
Rs 590.00
Quick Info :
Four 7-Segment LED Displays with 0.36″ high red digits
Built-in TM1637 LED Driver
2-wire serial interface for easy hookup to uC
3.3 and 5V compatible
Rs 390.00
Quick info :
Detection Voltage Range DC: 3.5-130V（max）
Voltage Sampling Period : 300ms/ second
Input Impedance : >100KΩ
Working Current : <10mA
Rs 450.00Rs 500.00
Quick Info :
Size : 2.4 inch
Resolution : 240 x 320 pixel
Touch : Resistive
Suitable for an Uno (Atmega328P) or Mega (Atmega2560) based Arduinos (other chips are not supported)
Dimensions: 72.5 mm x 53 mm
Driver: ILI9320 or ILI9341 (or compatible with one of two)
Rs 1,950.00Rs 2,250.00
Quick Info :
A single module can drive a total of 8 * 8 dot matrix overcast
The module voltage: 5V
Module Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height)
Rs 1,650.00
Quick Info :
Operating Voltage is 4.7V to 5.3V
Current consumption is 1mA without backlight
Alphanumeric LCD display module, meaning can display alphabets and numbers
Consists of four rows and each row can print 16 characters.
Compatible with LCD to I2C Adapter Board
Rs 1,390.00
Specification:
Size: 1.28inch
Resolution: 240 × 240
Driving chip: GC9A01
Interface method: SPI
Color: Full-color RGB
Rs 2,190.00
