Skip to content
Quick Info :
Built-in 2 channels (dual) enabling use in stereo and bridge amplifier applications
Dual : 6W×2 (typ.)
Bridge : 19W (typ.)
Supply Voltage : 18v
Allowable power dissipation : 15W
Rs 390.00
Quick Info :
Type of Control Channel: N -Channel
Maximum Power Dissipation (Pd): 150 W
Maximum Drain-Source Voltage |Vds|: 200 V
Maximum Drain Current |Id|: 30 A
Rs 390.00
Quick Info:
Type of IGBT Channel: N-Channel
Maximum Power Dissipation (Pc), W: 310
Maximum Collector-Emitter Voltage |Vce|, V: 1200
Collector-Emitter saturation Voltage |Vcesat|, V: 1.48
Maximum Collector Current |Ic|, A: 40
Rs 390.00
Quick Info :
Drain Source Voltage (Vdss) : 55V
Continuous Drain Current (Id) : 49A
Power Dissipation (Pd) : 94W
Rs 390.00
Quick Info :
Operating voltage: 12V to 24V
Output Power: 30W+30W
Dual channel
Chip name: TPA3110
Rs 390.00Rs 490.00
Quick Info :
Output voltage : 6V
Current range : 180mA
Dimension : 99x69mm
Rs 390.00
Quick Info :
Vcc Range Typical 3.0 – 5.5V
Collector Light Current
20 lux 10uA (typical)
100 lux 50uA (typical)
Spectral Detection
Detection Range 440nm-800nm
Rs 390.00Rs 590.00
Quick info:
Compatible Module : ESP32-CAM (AI-Thinker)
USB-to-Serial Chip : CH340G
Connector Type : Micro USB
Onboard Controls : RESET button, BOOT (IO0) button
Power Supply Output : 5V/3.3V regulated
Rs 390.00
Quick Info :
Speaker Type: Full-range
Impedance: 4Ω (Ohms)
Power Handling: 5W
Magnet Type: Ferrite or Neodymium
Size: 2 inches (Diameter)
Frequency Response: 150Hz – 20kHz
Rs 390.00
Quick Info :
Nominal Diameter: 3 inches (78 mm)
Impedance: 4 ohms
Rated Power Handling: 5 watts RMS
Magnet Type : Single
Magnet Diameter: 40 mm
Rs 390.00
Quick Info :
Type : N-Channel MOSFET
Drain-Source Voltage : 1200V
Continuous Drain Current : 20A (at 25°C)
Pulsed Drain Current : 40A
Gate-Source Voltage : ±30V
Drain-Source On-Resistance : 0.190Ω
Rs 390.00
Quick Info :
Collector-Emitter Voltage : 1200 V
Collector Current : 25 A
Collector Current : 50 A
Gate-Emitter Voltage : ±20 V
Collector-Emitter Saturation Voltage : 2.1 V
Rs 390.00
Quick info:
Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
Adjustable charging current: 0.5A to 2A (default 1A)
Embedded switching regulator for efficient charging
LED indicators: Red (charging), Green (complete)
Multiple protection circuits: overcurrent, over-discharge, overvoltage
Compact design with heat dissipation pad
Easy voltage switching via F solder pad connection
Rs 390.00
Quick Info :
Type: Power Relay
Coil Voltage: 12V DC
Switching Current: 30A
Contact Form: SPDT (Single Pole Double Throw)
Pin Count: 6
Rs 390.00Rs 450.00
Quick Info :
Type: Battery Level Indicator
Compatibility: 1-8 Cell LiPo/Li-ion
Voltage Range: 3V-34V
Features: User-configurable
Rs 390.00Rs 450.00
Quick Info :
Battery Type Supported: 18650 Li-ion Rechargeable Battery (3.7 V nominal)
Number of Slots: 1
Input Voltage: 110 V – 240 V AC
Input Frequency: 50 Hz – 60 Hz
Output Voltage: 4.2V DC
Charging Current (Output): 1000 mA (1A) DC
Plug Type: UK Plug
Rs 390.00Rs 490.00
Quick Info :
Model : BK-150
Net Weight : 150 g
Type : Soldering flux paste
Feature : Anti-oxidation, smooth soldering
Rs 390.00Rs 450.00
Quick Info:
Control Voltage : 3V DC
Relay Type : Electromechanical (SPDT)
Number of Channels : 2 (independently controlled)
Contact Configuration : NO, NC, COM (per channel)
Maximum AC Load : 250V AC / 10A (per channel)
Maximum DC Load : 30V DC / 10A (per channel)
Optocoupler Isolation : Yes (per channel)
Compatible Platforms : ESP8266, ESP32, Arduino (3V logic)
Rs 390.00Rs 450.00