Quick Info :
Power Input : 3.0V-5.5V
Up to +26V target voltage
0.1 ohm 1% 2W current sense resistor
Rs 420.00Rs 950.00
Quick Info :
Senses Bus Voltages : 0 V to 36 V
High-Side or Low-Side Sensing
Reports Current, Voltage, and Power
Operates from 2.7-V to 5.5-V Power Supply
Rs 590.00Rs 900.00
Quick Info :
Sensing distance: 5mm
Operating voltage: DC 10-30V
Screw hole : 3.2mm, Pitch : 10.5mm
Wire length : 100cm (39-inch)
Rs 690.00
Quick Info :
Sensing distance : 5mm
Operating voltage : 10 – 30 VDC
Response frequency : 800Hz
Output method : PNP, 150mA load
Rs 690.00
Quick Info :
4mm detection distance with ±10% accuracy
Adjustable sensitivity range: 0-3.8mm
Detects magnetic and non-magnetic metals
Built-in LED indication for switched state
IP67 waterproof protection rating
3-wire connection: VCC, GND, NPN NO output
Rs 690.00
Quick Info :
Power Supply Voltage : 5V
Size : 27 * 17mm
Communication Type : serial port communication (TTL level)
Rs 650.00
Quick Info :
Working Voltage : 3.3v to 5v
Detectable Distance : 2 ~ 30cm,
Detection angle : 35 °
Comparator chip: LM393
Rs 180.00
Quick Info :
Working voltage: 3.3V~5V
The output form: Digital switching outputs. (0 and 1)
Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00
Quick Info :
Digital Precision : Utilize the digital I2S interface boasting high precision 24-bit data for unparalleled audio quality.
Optimal Signal-to-Noise Ratio : Benefit from a remarkable 61 dBA signal-to-noise ratio, ensuring clear and crisp sound reproduction.
Enhanced Sensitivity :With a high sensitivity of -26 dBFS, capture audio with precision and clarity.
Rs 1,290.00
Quick Info :
Type: IR Transmitter + Receiver Pair
LED Size: 5mm
Range: Up to 3 meters
Voltage: 3.3-5V DC
Output: Digital Signal
Rs 630.00Rs 750.00
Quick Info :
Type: IR Flame Sensor
Voltage: 3.3V-5V
Outputs: Digital & Analog
Features: Adjustable Sensitivity
Application: Fire Detection
Rs 180.00Rs 190.00
Quick Info :
Wavelength Sensitivity : 850nm
Case Material : Black epoxy for enhanced IR filtering
Package Type : ,5mm
Operating Voltage : 2.7V – 5.5V
Current Consumption : ≤1.5mA (typical)
Reception Distance : 10m – 30m (depends on model)
Carrier Frequency : 30kHz – 56kHz
Rs 30.00
Quick Info :
Wavelength : 940nm
Forward Voltage : 1.2V – 1.6V
Color : White
Forward Current : 20mA (typical), max 50mA
Power Dissipation : ≤100mW
Rs 20.00
Quick Info :
Wavelength Sensitivity : 850nm – 950nm (typically 940nm)
Operating Voltage : 2.7V – 5.5V
Current Consumption : ≤1.5mA (typical)
Reception Distance : 10m – 30m (varies by model)
Carrier Frequency : 30kHz – 56kHz
Rs 40.00
Quick Info :
Type: Half-Bridge Gate Driver IC
Package: 8-Pin DIP
Voltage Rating: Up to 600V
Output Current: 130-270mA source / 270-520mA sink
Features: Bootstrap operation, shoot-through protection
Use: Motor drives, inverters, H-bridge, DC-DC converters
Rs 190.00Rs 200.00
Quick Info :
IC Type: Self-Oscillating Half-Bridge Driver
Operating Voltage Range (Vcc): 10V to 15.6V
Maximum Supply Voltage (Vcc max): 20V
Output Driver Voltage: 600V (High-Side & Low-Side)
Output Peak Current: ±500mA
Adjustable Oscillator Frequency: Up to 150kHz
Rs 230.00
Quick Info :
No. of Channels : 2 Channels
Driver Configuration : Half Bridge
Power Switch Type : MOSFET
No. of Pins : 8 Pins
Rs 230.00