Quick info:
Compatible Module : ESP32-CAM (AI-Thinker)
USB-to-Serial Chip : CH340G
Connector Type : Micro USB
Onboard Controls : RESET button, BOOT (IO0) button
Power Supply Output : 5V/3.3V regulated
Rs 390.00
Quick Info :
Two low-power Xtensa® 32-bit LX6 microprocessors
802.11 b/g/n (802.11n up to 150Mbps) Wi-Fi protocol
BLUETOOTH® v4.2 BR/EDR and BLE
SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, and IR module interfaces
Hall sensor
2.7V to 3.6V operating voltage supply
Rs 1,280.00
Quick Info :
Core: ESP32-D0WD (Xtensa Dual-Core 32 -bit LX6 Microprocessor)
Clock Frequency: Adjustable from 80 MHz to 240 MHz
Wireless Connectivity: Wi-Fi $802.11 b/g/n and Bluetooth v4.2 BR/EDR & BLE
Flash Memory: 4 MB (Integrated SPI Flash)
SRAM: 520 KB
Antenna Type: External Antenna via U.FL Connector
Peripherals: 32 GPIOs, ADC, DAC, UART, SPI, I²C, I²S, Motor PWM, Touch Sensor
Supply Voltage: 3.0 V – 3.6 V DC
Rs 1,450.00Rs 1,650.00
Quick Info :
802.11 b/g/n
Operating Voltage: 3.3V
Wi-Fi Direct (P2P), soft-AP
Integrated TCP/IP protocol stack
Rs 490.00Rs 590.00
Quick Info:
Material : eSUN PETG
Colour : Solid Black
Diameter : 1.75mm (±0.05mm tolerance)
Spool Weight : 1kg
Print Temperature : 230°C – 250°C
Bed Temperature : 70°C – 90°C
Rs 4,950.00Rs 5,500.00
Quick Info:
Material : PETG
Diameter : 1.75mm
Net Weight : 1kg
Color : Solid White
Print Temperature : 230°C to 250°C
Bed Temperature : 60°C to 80°C
Rs 4,950.00Rs 5,500.00
Quick Info:
Material : eSUN PLA+
Colour : Black
Diameter : 1.75mm (±0.05mm tolerance)
Spool Weight : 1kg
Print Temperature : 200°C – 230°C
Bed Temperature : 25°C – 60°C
Rs 4,950.00Rs 5,500.00
Quick Info:
Material : eSUN PLA+
Colour : White
Diameter : 1.75mm (±0.05mm tolerance)
Spool Weight : 1kg
Print Temperature : 200°C – 230°C
Bed Temperature : 25°C – 60°C
Rs 4,950.00Rs 5,500.00
Quick Info:
Material : eSUN PLA+
Colour : Black
Diameter : 1.75mm (±0.05mm tolerance)
Spool Weight : 500g
Print Temperature : 200°C – 230°C
Bed Temperature : 25°C – 60°C
Rs 2,950.00Rs 3,050.00
Quick Info:
Material : PLA+
Diameter : 1.75mm
Net Weight : 500g
Color : Blue
Rs 2,850.00Rs 3,200.00
Quick Info:
Material : PLA+
Diameter : 1.75mm
Net Weight : 500g
Printing Temperature : 210°C – 230°C
Rs 2,850.00Rs 3,200.00
Quick Info:
Material : eSUN PLA+
Colour : White
Diameter : 1.75mm (±0.05mm tolerance)
Spool Weight : 500g
Print Temperature : 200°C – 230°C
Bed Temperature : 25°C – 60°C
Rs 2,950.00Rs 3,290.00
Quick Info:
Interface : Cat6 / RJ45
Connector Type : Female to Female
Contact Material : Gold-Plated Phosphor Bronze
Data Rate : Up to 1000 Mbps
Rs 750.00Rs 975.00
Quick Info:
Sensors : 4 × external valve stem cap type
Bluetooth : BLE 4.0 — 2.4GHz
App : BLE TPMS (iOS & Android)
Waterproof Rating : IP67
Operating Voltage : 3V DC
Kit Includes : 4 sensors, anti-theft nuts, spanner
Rs 17,500.00Rs 19,500.00
Quick Info :
Teeth: 40
Bore: 5 mm
Material: Brass
Filament: 1.75 mm
Application: 3D Printer Extruder
Rs 180.00Rs 280.00
Quick Info :
Model – YS 60
Rated Power – 50W to 60 W
Rated Voltage – 220V
Capacitor – 1.2uf , 1.5uf , 1.8uf , 400V – 450V
Rated Frequency – 50Hz
RPM – 1200/r min
Rs 2,750.00
Quick Info :
Connector Type : Female to Female
Wire Length : 30cm
Pin Pitch : 2.54mm
Wire Gauge : 24AWG
Rs 8.00
Quick Info:
Width : 50mm
Roll Length : 25 Meters
Color : Transparent
Adhesive Type : Single-Side Adhesive
Rs 1,150.00Rs 1,450.00
