Quick Info
Operating Voltage : 9 – 12 V (Preferred 12V)
Case (L x W x H) : 53 x 40 x 28mm (2.1 x 1.6 x 1.1″)
Latch (L x W) : 10 x 10mm (0.4 x 0.4″)
Rs 1,590.00
Quick Info :
Power : 3 to 5VDC
Pressure sensing range : 300- 1100 h Pa (9000m to -500m above sea level)
This board/chip uses I2C 7-bit address 0x77.
Rs 450.00
Quick Info :
Power Requirements: 2.7 to 6.5 VDC
Communication Interface: I²C (up to 400 kHz)
Operating temperature: -22 to +185 °F to +85 °C)
Dimensions: 0.73 x .65 in ( 1.8 x 1.7 cm)
Rs 850.00
Quick Info :
Single-Supply Operation (2.7V to 5.5V)
Best Detection Range: 10mm
High-Resolution Conversion of Light Intensity to Frequency
Programmable Color and Full-Scale Output Frequency
Rs 750.00
Specifications :
Input Voltage : AC 100 ~ 240V 50/60 HZ
Output Voltage: DC 9V
Output Current: 1A
Plug Type : UK Plug
Rs 790.00
Quick Info :
Stepper motor deceleration
Diameter: 28mm
Voltage: 5V
Step angle: 5.625 x 1 / 64
Reduction ratio: 1 / 64
Rs 350.00Rs 490.00
Quick Info :
5-18V power supply supported.
Serial USB TTL compatible for 2.85V, 3.3V and 5v signal
GSM, GPRS, GPS {text messaging, data transmission, positioning} triple function.
Rs 4,000.00Rs 4,300.00
Quick Info :
The working voltage: 5 ~ 12V
Output amplitude: 4.2V V-PP(5v input) to 11.4V V-PP(12V input).
Maximum output current: >=15mA (5V IN), >=35mA (12V IN)
Rs 290.00
Quick Info :
All SD SPI pins output, MOSI, SCK, MISO, and CS.
Support 5V/3.3V input.
This module can handle 2GB SD cards.
Rs 350.00
Quick Info :
Channels : 4
Input release voltage: 3.5 to 5V
Rated load voltage: 100V to 240V AC
Load current: 0.10 to 2A
Rs 1,600.00
Quick Info :
Interface : I2C
I2C Address : 0x3F
Supply voltage : 5V
Contrast Adjust : Through Potentiometer
Backlight : Blue
Rs 1,100.00
Quick Info :
18 W mono amplifier circuit design
On-board 10K potentiometer for volume adjustment
Operating Voltage Range: 6 V to 12 V
Rs 290.00
Quick Info :
5W Output at 10% (Total Harmonic Distortion
3W Output at 10% THD with a 4Ω Load and 5V Power Supply
Rs 550.00
Quick info:
Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
Adjustable charging current: 0.5A to 2A (default 1A)
Embedded switching regulator for efficient charging
LED indicators: Red (charging), Green (complete)
Multiple protection circuits: overcurrent, over-discharge, overvoltage
Compact design with heat dissipation pad
Easy voltage switching via F solder pad connection
Rs 390.00
Quick Info :
Part Number : KBPC5010
Package Type : Metal Case Bridge Rectifier
Maximum Repetitive Peak Reverse Voltage (V_RRM) : 1000V
Maximum RMS Voltage (V_RMS) : 700V
Maximum Average Forward Current (I_O) : 50A
Rs 290.00
Quick Info :
Nominal Diameter: 3 inches (78 mm)
Impedance: 4 ohms
Rated Power Handling: 5 watts RMS
Magnet Type : Single
Magnet Diameter: 40 mm
Rs 390.00
Quick Info :
Type: Internal TV Speaker
Size : 60mm X 125mm
Impedance: 4 Ohms
Power Output: 3 Watts (RMS)
Frequency Response: 100 Hz – 15 kHz
Rs 490.00
