-
ESP Development Test Programmer Adapter ESP-01/ESP-07/ESP-12/ESP32
Quick Info :
- Compatible: ESP-01, ESP-07, ESP-12, ESP32
- Interface: USB to Serial (CH340/CP2102)
- Power: 3.3V regulated output
- Features: Auto-reset, GPIO breakout, boot mode switches
- Programming: Arduino IDE, ESP-IDF, MicroPython
- Use: ESP development, testing, firmware flashing, IoT projects
Rs 1,350.00Rs 1,450.00ESP Development Test Programmer Adapter ESP-01/ESP-07/ESP-12/ESP32
Rs 1,350.00Rs 1,450.00 -
ESP32 CAM Module
Quick Info :
- ESP32 SoC with Wi-Fi and BLE connectivity
- OV2640 2M pixel camera with connector included
- Micro SD card connector
- Reset button
Rs 2,290.00Rs 2,690.00ESP32 CAM Module
Rs 2,290.00Rs 2,690.00 -
ESP32 Development Board 30 Pin Type C
Quick Info :
- Chip: ESP32-WROOM-32 (Dual-core 240MHz)
- Pins: 30 GPIO
- Flash: 4MB / SRAM: 520KB
- Connectivity: WiFi 802.11n + Bluetooth 4.2
- USB: Type-C with CP2102
- Power: Deep sleep ~10μA
Rs 1,350.00Rs 1,450.00ESP32 Development Board 30 Pin Type C
Rs 1,350.00Rs 1,450.00 -
ESP32 ESP-WROOM-32 Development Board 30 Pin
Quick Info :
- Chip: ESP32-WROOM-32
- Processor: Dual-core 240 MHz
- Connectivity: WiFi + Bluetooth 4.2
- GPIO: 30 pins
- USB: CP2102 with Micro USB
- Flash: 4 MB
- Voltage: 3.3V operating, 5V input
Rs 1,350.00Rs 1,450.00ESP32 ESP-WROOM-32 Development Board 30 Pin
Rs 1,350.00Rs 1,450.00 -
ESP32 ESP-WROOM-32 Development Board 38 Pin
Quick Info :
- Chip: ESP32-WROOM-32
- Processor: Dual-core 240 MHz
- Connectivity: WiFi + Bluetooth 4.2
- Pins: 38 pins total
- USB: CP2102 with Micro USB
- Flash: 4 MB
- Voltage: 3.3V operating, 5V input
Rs 1,400.00Rs 1,500.00ESP32 ESP-WROOM-32 Development Board 38 Pin
Rs 1,400.00Rs 1,500.00 -
ESP32 Expansion Breakout Board
Quick Info :
- Compatibility: 30-pin & 38-pin ESP32 boards
- Terminals: Screw terminal blocks (3.81mm pitch)
- Power: No onboard regulation (uses ESP32 power)
- Wire Support: 22-28 AWG
- Size: ~75mm x 55mm
- Assembly: Plug-and-play design
- Mounting: 4 mounting holes included
Rs 750.00Rs 850.00ESP32 Expansion Breakout Board
Rs 750.00Rs 850.00 -
ESP32 S3 DevKitC-1 N16R8
Quick info:
- N16R8: 16 MB Flash and 8 MB PSRAM.
- Dual-Core Xtensa® LX7 Processor – Runs at up to 240 MHz for high-performance computing.
- Wi-Fi 4 & Bluetooth 5 (LE) – Supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE) for wireless connectivity.
- Dual USB-C Ports:
- One for power and USB-to-UART bridge communication for easy programming.
- One for native USB functionality, supporting USB OTG, device emulation, or USB mass storage applications.
Rs 1,850.00Rs 2,290.00ESP32 S3 DevKitC-1 N16R8
Rs 1,850.00Rs 2,290.00 -
ESP32 S3 Expansion Adapter Breakout Board
Quick Info :
- Type: 44-pin expansion breakout board
- Compatible: ESP32-S3 development boards
- Terminals: Screw terminal blocks (1→2 expansion)
- Spacing: 25.4mm (44-pin)
- Size: 80mm x 58mm
- No Soldering Required
Rs 850.00Rs 950.00ESP32 S3 Expansion Adapter Breakout Board
Rs 850.00Rs 950.00 -
ESP32 S3 WROOM DEVKITC
Quick info:
- Dual-Core Xtensa® LX7 Processor – Runs at up to 240 MHz for high-performance computing.
- Wi-Fi 4 & Bluetooth 5 (LE) – Supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE) for wireless connectivity.
- USB OTG (Full-Speed) – Built-in USB 1.1 OTG for flashing, communication, and JTAG debugging.
Rs 2,290.00Rs 2,490.00ESP32 S3 WROOM DEVKITC
Rs 2,290.00Rs 2,490.00 -
ESP32-C3 Supermini
Quick Info :
- 13 programmable GPIOs
- Power
– 5v
– 3.3v - Digital interfaces:
– 1 × SPI
– 1 × UART
– 1 × I2C
– 1 × I2S
– 1 x LED PWM controller - Analog interfaces:
– 2 × 12-bit SAR ADCs, up to 6 channels
Rs 950.00ESP32-C3 Supermini
Rs 950.00 -
ESP32-Cam Programmer Base Module
Quick info:
- Chipset: CH340
- Connectivity: Micro-USB
- IO Port: 9
- Power Supply(V): 5
Rs 390.00ESP32-Cam Programmer Base Module
Rs 390.00 -
ESP32-WROOM-32 Module
Quick Info :
- Two low-power Xtensa® 32-bit LX6 microprocessors
- 802.11 b/g/n (802.11n up to 150Mbps) Wi-Fi protocol
- BLUETOOTH® v4.2 BR/EDR and BLE
- SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, and IR module interfaces
- Hall sensor
- 2.7V to 3.6V operating voltage supply
Rs 1,280.00ESP32-WROOM-32 Module
Rs 1,280.00 -
ESP32-WROOM-32U Wi-Fi & Bluetooth MCU Module
Quick Info :
- Core: ESP32-D0WD (Xtensa Dual-Core 32-bit LX6 Microprocessor)
- Clock Frequency: Adjustable from 80 MHz to 240 MHz
- Wireless Connectivity: Wi-Fi $802.11 b/g/n and Bluetooth v4.2 BR/EDR & BLE
- Flash Memory: 4 MB (Integrated SPI Flash)
- SRAM: 520 KB
- Antenna Type: External Antenna via U.FL Connector
- Peripherals: 32 GPIOs, ADC, DAC, UART, SPI, I²C, I²S, Motor PWM, Touch Sensor
- Supply Voltage: 3.0V – 3.6V DC
Rs 1,450.00Rs 1,650.00ESP32-WROOM-32U Wi-Fi & Bluetooth MCU Module
Rs 1,450.00Rs 1,650.00 -
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
Extruder Drive Wheel 40 Teeth 5mm Inner Hole Diameter
Quick Info :
- Teeth: 40
- Bore: 5 mm
- Material: Brass
- Filament: 1.75 mm
- Application: 3D Printer Extruder
Rs 180.00Rs 280.00Extruder Drive Wheel 40 Teeth 5mm Inner Hole Diameter
Rs 180.00Rs 280.00 -
Fan Motor 20MM Bearing Type Copper SUOER
Quick Info :
- Model – YS 60
- Rated Power – 50W to 60 W
- Rated Voltage – 220V
- Capacitor – 1.2uf , 1.5uf , 1.8uf , 400V – 450V
- Rated Frequency – 50Hz
- RPM – 1200/r min
Rs 2,590.00Fan Motor 20MM Bearing Type Copper SUOER
Rs 2,590.00 -
Flame Sensor Module
Quick Info :
- Operating Voltage : 3.3V ~ 5.5V
- Infrared Wavelength Detection : 760nm ~ 1100nm
- Sensor Detection Angle : 60°
Rs 180.00Rs 280.00Flame Sensor Module
Rs 180.00Rs 280.00 -
Flange Coupling Steel Shaft 4mm Bore
Quick Info :
- Type: Rigid Flange Coupling
- Bore: 4mm (both sides)
- Material: Steel
- Features: Zero backlash, set screw locking
- Mounting: Flange with screw holes
- Use: Motor shafts, robotics, CNC, 3D printers, encoders
Rs 350.00Rs 400.00Flange Coupling Steel Shaft 4mm Bore
Rs 350.00Rs 400.00
