-
Logic Level Converter Bi-Directional Module 5V to 3.3V
Quick Info :
- 4 channels can convert up to 4 logic signals
- Can convert between 1.8V, 2.8V, 3.3V and 5V logic circuits
- Bi-directional so can work with bi-directional buses such as I2C
- Utilizes N-Ch MOSFET transistors for level translation
Rs 100.00 -
LTC817 100W DC-DC Boost Voltmeter
Quick Info :
- Input voltage range：4-35VDC
- Input current：7A
- Output voltage range：3.5-35VDC
- Output current: 6A
- Output power: 100W
Rs 1,750.00LTC817 100W DC-DC Boost Voltmeter
Rs 1,750.00 -
LY2NJ 12V DC Omron Relay
Quick Info :
- Model No : LY2NJ/HH62P/JQX-13F
- Coil Voltage: 12VDC
- Control Voltage(V) :220VAC
- Contact Structure: DPDT, with LED pilot
- Terminal : 8 pins plug-in type
Rs 490.00LY2NJ 12V DC Omron Relay
Rs 490.00 -
Magnet Block 30x10x2mm
Quick Info :
- Length: 30mm
- Width: 10mm
- Height: 2mm
Rs 100.00Magnet Block 30x10x2mm
Rs 100.00 -
Magnet Block 30x20x5mm
Quick Info :
- Length: 30mm
- Width: 20mm
- Height: 5mm
Rs 300.00Magnet Block 30x20x5mm
Rs 300.00 -
Magnet Button Cell 10X2
Quick Info :
- Diameter: 10mm
- Height: 2mm
Rs 65.00Magnet Button Cell 10X2
Rs 65.00 -
Magnet Button Cell 12X2
Quick Info :
- Diameter: 12mm
- Height: 2mm
Rs 85.00Magnet Button Cell 12X2
Rs 85.00 -
-
Magnetic Reed Switch 10mm
Quick info:
- Normally Open
- Voltage:
- Switching (VDC-MAX.): 200
- Breakdown (VDC-MIN): 250
- Arc-Quench (VDC-MIN): 200
- Current:
- Switching (AMPERES-MAX.): 0.5
- Carry (AMPERES-MAX.): 1.2
Rs 90.00Magnetic Reed Switch 10mm
Rs 90.00 -
MAX30100 Pulse Oximeter and Heart Rate Sensor Module
Quick Info :
- Optical sensor: IR and red LED combined with a photodetector
- Measures absorbance of pulsing blood
- I2C interface plus INT pin
- 3.3V power supply complete pulse oximeter and heart rate sensor solution, simplifies design, integrated LEDs, photo sensor, and high-performance analog front
Rs 490.00 -
MAX30102 Pulse Oximeter & Heart-Rate Module
Quick Info :
- LED Peak Wavelength: 660nm/880nm
- LED Supply Voltage: 3.3~5V
- Interface: I2C Interface
- Operating Temperature Range: -40°C to +85°C
Rs 590.00 -
MAX471 Current and Voltage Sensor
Quick Info :
- Test Voltage range: DC3 – 25V (on 5V) or DC3 – 16.5V (on 3.3V)
- Monitors Both Charge and Discharge
- Complete High-Side Current Sensing
- Current Sensing up to 3A
Rs 1,950.00MAX471 Current and Voltage Sensor
Rs 1,950.00 -
MAX485 RS485 to TTL module
Quick Info :
- Working voltage：5V
- Connect to 2P terminal on board, for wiring of RS-485 to communicate
Rs 220.00MAX485 RS485 to TTL module
Rs 220.00 -
MAX6675 with Type K Thermocouple
Quick info:
- Supply voltage: 3 to 5.5V
- Module current: 50mA
- Module interface: Serial (SO, SCK, CS), 16-bit SPI compatible
- Thermocouple temperature range: 0 to 450°C
- Module sensor temperature range: 0 to 1024°C
Rs 790.00MAX6675 with Type K Thermocouple
Rs 790.00 -
MAX7219 8 Way Display Module
Quick Info :
- Eight 7-Segment LED Displays with 0.36″ high red digits
- LED displays mounted in sockets
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
- Can daisy-chain multiple modules together for larger displays
Rs 590.00MAX7219 8 Way Display Module
Rs 590.00 -
MAX7219 8 X 8 LED Dot Matrix Module
Quick Info :
- A single module can drive 8 by 8 common cathodes
- Module Operating voltage: 5V.
- Module size: 5 cm long X 3.2 cm wide X 1.5 cm high
- Module with input and output interfaces, supports multiple modules cascade
- Led colour:Red
Rs 800.00MAX7219 8 X 8 LED Dot Matrix Module
Rs 800.00 -
MAX7219 8 X 8 LED Dot Matrix Module V2
Quick Info :
- Single 8×8 LED Matrix Display with 1.3″ high bright red display
- Built-in MAX7219 LED Driver
- SPI 3-wire serial interface for easy hookup to MCU
Please note that the Jumper Cables need to be purchased separately
Rs 900.00MAX7219 8 X 8 LED Dot Matrix Module V2
Rs 900.00 -
MAX7219 8-Digit LED Display Drivers
Quick Info :
- No. of Digits : 8
- No. of Segments : 7
- Supply Voltage Min : 4V
- Supply Voltage Max : 5.5V
Rs 495.00MAX7219 8-Digit LED Display Drivers
Rs 495.00