Quick Info:
Thermistor Type : NTC
Resistance at 25°C : 10KΩ
B-Value : 3950K
Cable length: 1m
Terminal Type : Ring Lug
Operating Temperature : -40°C – 125°C
Tolerance : ±1%
Rs 320.00Rs 350.00
Quick Info:
Shape : Disc
Dimensions : 12mm Diameter × 4mm Thickness
Material : Neodymium-Iron-Boron (NdFeB)
Grade : N35
Coating : Nickel-Copper-Nickel (Ni-Cu-Ni)
Pull Force : ~3.2 kg
Operating Temperature : Up to 80°C
Rs 90.00
Quick Info:
Connector Type : 3.5mm TRS Male to Male
Cable Length : 1.5 Metres
Audio Channels : Stereo
Compatibility : Phones, Tablets, Laptops, Speakers
Plug Finish : Nickel-Plated
Rs 440.00Rs 550.00
Quick Info:
Connector A : 3.5mm TRS Male
Connector B : 2x RCA Male (Red / White)
Cable Length : 3 Metres
Audio Channels : Stereo
Compatibility : Phones, Laptops, Amplifiers, AV Receivers
Rs 950.00Rs 1,100.00
Quick Info:
Input : 1× 3.5mm Male Jack
Output : 2× 3.5mm Female Jack
Type : Stereo Y Splitter
Audio : Stereo (TRS)
Signal : Analogue Audio
Compatibility : Any 3.5mm Audio Device
Rs 320.00Rs 390.00
Quick Info:
Connector Type : 1x 3.5mm Female, 2x 3.5mm Male
Audio Channels : Stereo (3-pole)
Connector Plating : Gold-plated
Signal Type : Analog Audio
Compatibility : Smartphones, Laptops, Tablets, Speakers
Direction : 1 Input to 2 Outputs
Rs 440.00Rs 490.00
Quick Info:
Receiver IC : HX1838
Supply Voltage : 2.7V – 5.5V
Carrier Frequency : 38 kHz
Interface : 3-Pin (VCC, GND, OUT)
Protocol Support : NEC, RC5, RC6 and others
Rs 180.00Rs 200.00
Quick Info:
Operating Voltage : 3.3V – 5V DC
Carrier Frequency : 38kHz
Remote Buttons : 21
Effective Range : Up to 8 metres
Reception Angle : ~45°
Output Type : Digital
Compatibility : Arduino, Raspberry Pi, ESP32
Rs 290.00Rs 350.00
Quick Info:
Operating Voltage : 3.3V – 5V DC
Output Type : Digital (4 channels)
Detection Method : Infrared reflectance
Number of Sensors : 4
Detection Distance : 1mm – 8mm
Sensitivity Adjust : Yes, onboard potentiometer
Dimensions : 75mm x 16mm
Rs 590.00Rs 650.00
Quick Info:
Operating Voltage : 3.3V – 5V DC
Output Type : Digital
Detection Method : Infrared reflectance
Detection Distance : 1mm – 8mm
Sensitivity Adjust : Yes, onboard potentiometer
Compatibility : Arduino, Raspberry Pi, ESP32
Dimensions : 32mm x 14mm
Rs 220.00Rs 250.00
Quick Info:
Operating Voltage : 3.3V – 5V DC
Output Type : Digital
Detection Method : Infrared optical interrupt
Slot Width : ~5mm
Onboard Indicator : Yes
Compatibility : Arduino, Raspberry Pi, ESP32
Dimensions : 32mm x 14mm
Rs 240.00Rs 290.00
Quick Info:
Operating Voltage : 3.3V – 5V DC
Output Type : Digital
Sensor Type : Mercury tilt switch
Tilt Sensitivity : ~10°
Onboard Indicator : Yes
Compatibility : Arduino, Raspberry Pi, ESP32
Dimensions : 32mm x 14mm
Rs 320.00Rs 350.00
Quick Info:
Operating Voltage : 5V DC
Output Type : Digital
LED Color : Red
Tilt Sensor : Mercury-free ball switch
Compatibility : Arduino, Raspberry Pi, ESP32
Dimensions : 34mm x 14mm
Rs 250.00Rs 300.00
Quick Info:
Buzzer Type : Active (Built-in Oscillator)
Trigger Type : Low Level
Operating Voltage : 3.3V – 5V
Operating Current : <30mA
Output Frequency : ~2.5kHz (fixed)
Interface Pins : 3 (Signal, VCC, GND)
Compatibility : Arduino, ESP32, Raspberry Pi
PCB Size : 18.5mm × 15mm
Rs 100.00Rs 150.00
Quick Info:
Buzzer Type : Passive (tone controlled via code)
Trigger Type : High Level
Operating Voltage : 3.3V – 5V
Operating Current : <25mA
Frequency Range : 1.5kHz – 2.5kHz
Interface Pins : 3 (Signal, VCC, GND)
Compatibility : Arduino, ESP32, Raspberry Pi
PCB Size : 18.5mm × 15mm
Rs 100.00Rs 150.00
Quick Info:
LED Type : 5mm Auto-Flashing RGB (Built-in IC)
Operating Voltage : 3.3V – 5V
Forward Current : 20mA
Interface Pins : 3 (Signal, VCC, GND)
Color Mode : Automatic cycling, no code needed
Compatibility : Arduino, ESP32, Raspberry Pi
PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00
Quick Info:
LED Type : 5mm Dual Color (Red & Green)
Operating Voltage : 3.3V – 5V
Current per Channel : 20mA
Interface Pins : 3 (Red, Green, GND)
Compatibility : Arduino, ESP32, Raspberry Pi
PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00
Quick Info:
LED Type : 5mm Common Cathode RGB
Operating Voltage : 3.3V – 5V
Current per Channel : 20mA
Interface Pins : 4 (R, G, B, GND)
Compatibility : Arduino, ESP32, Raspberry Pi
PCB Size : 18.5mm × 15mm
Rs 150.00Rs 200.00
