-
360 Degree Rotary Encoder Module
Quick Info :
- Incremental Encoder
- Supply Voltage: 3-5V
- Left/Right rotary output pulse, each circle with 20 pulse
- Built in 10k resistor
- Cycles per revolution (CPR): 20
Rs 350.00360 Degree Rotary Encoder Module
Rs 350.00 -
1K – 100K Potentiometer
Quick Info :
- 1K, 5K, 10K, 50K, 100K Ohm
- Linear taper, carbon film type
- Single-Turn
Rs 30.00 – Rs 100.001K – 100K Potentiometer
Rs 30.00 – Rs 100.00 -
-
ESP8266 ESP-01 WIFI module
Quick Info :
- 802.11 b/g/n
- Operating Voltage: 3.3V
- Wi-Fi Direct (P2P), soft-AP
- Integrated TCP/IP protocol stack
Rs 590.00ESP8266 ESP-01 WIFI module
Rs 590.00 -
NodeMCU Wi-Fi Development Board
Quick Info :
- Microcontroller: ESP8266
- Operating Voltage: 3.3V
- Input Voltage: 7-12V
- Digital I/O Pins (DIO): 16
- Analog Input Pins (ADC): 1
Rs 1,150.00Rs 1,450.00NodeMCU Wi-Fi Development Board
Rs 1,150.00Rs 1,450.00 -
Arduino Compatible Leonardo
Quick Info :
- Microcontroller: ATmega32u4
- Operating Voltage: 5V
- Digital I/O Pins: 20
- PWM Channels: 7
- Analog Input Channels: 12
Rs 2,990.00Arduino Compatible Leonardo
Rs 2,990.00 -
UNI-T UT200B+ Digital Clamp Meter
Quick info:
- 3000-count display for precise measurements
- AC current measurement up to 600A
- AC/DC voltage measurement up to 600V
- Resistance testing up to 3MΩ range
- Capacitance measurement up to 1mF
- Auto-identify diode and continuity testing
- LIVE wire detection for enhanced safety
Rs 6,890.00Rs 7,200.00UNI-T UT200B+ Digital Clamp Meter
Rs 6,890.00Rs 7,200.00 -
TP5000 Battery Charging Module
Quick info:
- Charges both Li-ion (4.2V) and LiFePO4 (3.6V) batteries
- Adjustable charging current: 0.5A to 2A (default 1A)
- Embedded switching regulator for efficient charging
- LED indicators: Red (charging), Green (complete)
- Multiple protection circuits: overcurrent, over-discharge, overvoltage
- Compact design with heat dissipation pad
- Easy voltage switching via F solder pad connection
Rs 390.00TP5000 Battery Charging Module
Rs 390.00 -
ESP32 S3 DevKitC-1 N16R8
Quick info:
- N16R8: 16 MB Flash and 8 MB PSRAM.
- Dual-Core Xtensa® LX7 Processor – Runs at up to 240 MHz for high-performance computing.
- Wi-Fi 4 & Bluetooth 5 (LE) – Supports 2.4 GHz Wi-Fi and Bluetooth Low Energy (BLE) for wireless connectivity.
- Dual USB-C Ports:
- One for power and USB-to-UART bridge communication for easy programming.
- One for native USB functionality, supporting USB OTG, device emulation, or USB mass storage applications.
Rs 2,290.00Rs 2,490.00ESP32 S3 DevKitC-1 N16R8
Rs 2,290.00Rs 2,490.00 -
ZMPT101B AC Voltage Sensor Module Single Phase
Quick Info :
- Measures AC voltage up to 250V
- Built-in ZMPT101B voltage transformer (1000:1000 ratio)
- High galvanic isolation up to 4000V for safety
- Wide supply voltage: 5V to 30V DC
- Compatible with Arduino, ESP8266, Raspberry Pi
- Adjustable analog output for versatile applications
Rs 540.00 -
USB to RS485/TTL Serial Converter Adapter FT232
Quick Info :
- FT232RL+75176 chipset for stable communication
- Automatic data flow control – no manual DE/RE control
- Supports up to 32 devices on RS485 bus network
- Wide baud rate: 300-921600bps with auto-detection
- Switchable RS485/TTL modes via 4 jumpers
- TVS protection and USB self-recovery features
- Self-powered from USB – no external power needed
Rs 950.00 -
RS485 to TTL Converter Module
Quick Info :
- MAX485 chip-based for reliable RS485 communication
- Compatible with 3.3V and 5V power supplies
- Built-in 120-ohm termination resistor (jumper selectable)
- RX/TX LED indicators for signal monitoring
Rs 190.00RS485 to TTL Converter Module
Rs 190.00 -
4DOF Wooden Robot Arm Kit
Quick Info :
- 4 degrees of freedom for flexible arm movement
- Compatible with Arduino UNO, MEGA, and Raspberry Pi
- Uses 4x SG90 servo motors (may require separate purchase)
- Lightweight acrylic/wooden construction for easy assembly
- Includes functional claw gripper for object manipulation
- Multiple control options: joystick, PC software, custom code
- Perfect educational tool for STEM learning and robotics
Rs 2,890.004DOF Wooden Robot Arm Kit
Rs 2,890.00 -
Inductive Proximity Sensor SN04-N1 NPN
Quick Info :
- 4mm detection distance with ±10% accuracy
- Adjustable sensitivity range: 0-3.8mm
- Detects magnetic and non-magnetic metals
- Built-in LED indication for switched state
- IP67 waterproof protection rating
- 3-wire connection: VCC, GND, NPN NO output
Rs 690.00Inductive Proximity Sensor SN04-N1 NPN
Rs 690.00 -
Mini Motor Drive Shield Expansion Board L293D Module
Quick Info :
- Controls 2 DC motors or 1 stepper motor simultaneously
- Wide voltage range: 4.5V to 25V input supply
- 600mA continuous, 1.2A peak current per channel
- Built-in overtemperature and overcurrent protection
- PWM speed control and bidirectional rotation
- Direct compatibility with Arduino UNO/MEGA 2560
- Compact size: 40 x 35.5 x 12.5mm, weighs only 10g
Rs 400.00 -
Isolated MOSFET Driver Module
Quick Info :
- Optocoupler isolation protects control circuits
- Wide input range: 3-20V PWM signals
- High output capacity: DC 3.7-27V, up to 10A
- PWM frequency control: 0-20KHz for speed/brightness adjustment
- Compatible with motors, LED strips, pumps, solenoid valves
- Compact lightweight design at only 15g
- Perfect for Arduino and microcontroller projects
Rs 490.00Isolated MOSFET Driver Module
Rs 490.00 -
TFT LCD Display Module 1.8″ SPI Interface 128×160
Quick Info :
- True TFT display with 262,144 vibrant colors
- 4-wire SPI interface – minimal pin usage
- Works with 3.3V and 5V systems
- Built-in microSD card slot for bitmap storage
- Compatible with Arduino, Raspberry Pi, ESP32
- Controllable LED backlight
- Compact 34.5×58.0mm PCB size
Rs 1,490.00 -
2SD718 Silicon NPN Power Transistor
Quick Info :
- Transistor Type: NPN
- Collector-Emitter Voltage (Vce): 80V
- Collector-Base Voltage (Vcb): 80V
- Emitter-Base Voltage (Veb): 5V
- Collector Current (Ic): 15A (maximum)
- Power Dissipation (Pd): 100W
Rs 220.002SD718 Silicon NPN Power Transistor
Rs 220.00