Best Seller Items
-
-
2 – 10 Pin JST XH 2.54 Pitch Connector Cable and Base
Quick Info:
- Wire Type : 26AWG
- Pitch: 2.5mm±0.05
- length: 15cm
Rs 25.00 – Rs 75.00 -
Jumper Wire Male-Male 20cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Male 20cm
Rs 6.00 -
Jumper Wire Male-Female 30cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Female 30cm
Rs 8.00 -
Jumper Wire Male-Female 20cm
Quick Info :
- Connector : Male to Female
- 1 Cable : Rs. 6
- 1 Set (40pcs) : Rs. 240
Rs 6.00Jumper Wire Male-Female 20cm
Rs 6.00 -
Jumper Wire Male-Male 30cm
Quick Info :
- Connector : Male to Male
- 1 Cable : Rs. 8
- 1 Set (40pcs) : Rs. 320
Rs 8.00Jumper Wire Male-Male 30cm
Rs 8.00
-
Mini DC 3A Motor PWM Speed Controller
Quick Info :
- Operating Voltage: DC 4.5V-35V
- Control Power: 90W (maximum)
- Size: 30mm x 26mm x 14mm (Without Handle)
Rs 290.00Mini DC 3A Motor PWM Speed Controller
Rs 290.00 -
Keypad Flexible 16 Keys
Quick Info :
- Arduino and Raspberry Pi compatible
- 16-key membrane switch pad has 8 pin female header on end of flat cable
- White sticker on back can be peeled off for adhesive mounting
Rs 290.00Keypad Flexible 16 Keys
Rs 290.00 -
HX711 Load Cell Amplifier
Quick Info :
- Operation Voltage: 2.7V-5V
- Operation Current: < 1.5mA
- Sample rate: 10Hz
- Simultaneous 50 and 60Hz supply rejection
- Available Load Cells 5kg, 10kg or 20kg
Rs 290.00HX711 Load Cell Amplifier
Rs 290.00 -
NE555 Adjustable Pulse Frequency Duty Cycle Module Square Wave Signal Generator
Quick Info :
Main chip: NE555
Input Voltage (VCC): 5V-15VDC
Input current:~100MA
Output amplitude: 4.2V V-PP to 11.4V V-PP. (Varies with VCC voltage)Rs 280.00 -
Flame Sensor Module
Quick Info :
- Operating Voltage : 3.3V ~ 5.5V
- Infrared Wavelength Detection : 760nm ~ 1100nm
- Sensor Detection Angle : 60°
Rs 280.00Flame Sensor Module
Rs 280.00 -
-
-
MP1584 Mini 3A DC to DC Step down (Buck) Adjustable Module
Quick Info :
- Input Voltage: 4.5V – 28V
- Output Voltage: 0.8V – 20V
- Output Voltage Adjustment: On-board potentiometer
- Output Current: 1.8A (typical), 3.0A (max).
Rs 275.00 -
Reed Sensor Module Magnetic Control Switch
Quick info:
- Operating Voltage: 3.3V to 5V DC
- Output format: Digital switching output ( 0 and 1 )
- LEDs indicating output and power
Rs 250.00 -
TP5100 Lithium Cell Charging Module
Quick Info :
- Model: TP5100
- Input Supply voltage (V): 5 ~ 18
- Programmable charge current: 0.1 ~ 2 A.
Rs 250.00TP5100 Lithium Cell Charging Module
Rs 250.00 -
Rs 220.00 – Rs 250.00
-
Infrared Speed Sensor Module
Quick Info :
- Working voltage: 3.3V~5V
- The output form: Digital switching outputs. (0 and 1)
- Pin Configuration : VCC, GND, Dout and Aout
Rs 250.00Infrared Speed Sensor Module
Rs 250.00 -
Soil Hygrometer Humidity Detection Module
Quick Info :
- Operating voltage: 3.3V~5V.
- Adjustable sensitivity (shown in blue digital potentiometer adjustment)
- Dual output mode,analog output more accurate.
- A fixed bolt hole for easy installation.
- With power indicator (red) and digital switching output indicator (green).
Rs 250.00 -
5V 600MA USB Output charger step up Power Module
Quick Info:
- Input voltage: 0.9V – 5V;
- Output voltage: 5V;
- Output Amps : 600mA
Rs 250.00 -
5V USB Output Charger Step-Down Power Module
Quick Info :
- Input voltage: DC 6-24V
- Output voltage: 5.1-5.2V
- Output current: 2A
Rs 250.00 -
IRF520 MOSFET Driver Module
Quick Info :
- Voltage: 3.3V, 5V
- Output load voltage :0-24V
- Output load current: <5A (1A need to add more heat sink)
Rs 250.00IRF520 MOSFET Driver Module
Rs 250.00 -
NRF24L01 2.4GHz Transceiver Adapter Base
Quick Info :
- It can be used with NRF24L01 wireless module
- Add core nRF24L01+ Breakout Adapter with onboard 3.3V Regulator
- Onboard 3.3V voltage regulator accepts your Arduino +5V supply and provides 3.3V for the attached nRF24L01+ module
- Allows for easy connection to nRF24L01+ modules
- Small power on SMD LED indicator
Rs 250.00NRF24L01 2.4GHz Transceiver Adapter Base
Rs 250.00 -
1 channel 5V DC Relay Module
Quick Info :
- Channel : 1
- Coil sensitivity = 5VDC
- Maximum Contact capacity = 250VAC/10VDC
- Maximum Current capacity = 10A
Rs 250.00Rs 390.001 channel 5V DC Relay Module
Rs 250.00Rs 390.00 -
-
NTC Thermistor Module
Quick Info :
- Operating Voltage: 3.3V DC to 5V DC
- Output Current : 15mA
- PCB Size : 32 x 14mm
Rs 240.00NTC Thermistor Module
Rs 240.00 -
IR2155 Self-Oscillating Half Bridge Driver
Quick Info :
- No. of Channels : 2 Channels
- Driver Configuration : Half Bridge
- Power Switch Type : MOSFET
- No. of Pins : 8 Pins
Rs 230.00 -
-
MT3608 Mini DC-DC Step Up/Boost Module
Quick Info :
- Input voltage range 2.5 to 24V
- Output voltage range 5 to 28V
- Output current of up to 1.5A
Rs 230.00MT3608 Mini DC-DC Step Up/Boost Module
Rs 230.00 -
ULN2003 Stepper Motor Driver Board Module
Quick Info :
- High Voltage Outputs: 50V
- Inputs Compatible with Popular Logic Types (5V TTL – Arduino Compatible)
- Relay Driver Applications
Rs 230.00Rs 390.00ULN2003 Stepper Motor Driver Board Module
Rs 230.00Rs 390.00 -
MJ2955 PNP Power Transistor
Quick Info :
- : PNP
- : 60V
- : 15A
- : 115W
Rs 225.00MJ2955 PNP Power Transistor
Rs 225.00 - : PNP
-
Rocker Switch SPST 6 Pin
Quick info :
- Position Numbers : 2-3
- Terminal Numbers : 6
- Contact Type : SPST
- Rated Power : 250V 15A / 125V 20A
Rs 100.00 – Rs 220.00 -
-
USB Male to Male Cable 30cm
Quick Info :
- Type : USB A 2.0 Male and Male
- Cable Length : 15cm
Rs 220.00USB Male to Male Cable 30cm
Rs 220.00 -
-
-
Vibration SW-18010P Sensor Module
Quick Info :
- Working voltage : 3.3V ~ 5V
- Output type: Digital switching output (0 and 1)
- Wide voltage : comparator LM393
Rs 220.00Vibration SW-18010P Sensor Module
Rs 220.00 -
KY-005 IR Transmitter Module
Quick Info :
- Operating Voltage: 5V
- Current Consumption: 30-60mA
- Frequency: 38kHz
- Wavelength: 940nm
Rs 220.00KY-005 IR Transmitter Module
Rs 220.00 -
KY-022 IR Receiver Module
Quick Info :
- Chip type: VS1838B
- Operating Voltage: 3.3V to 5V
- Current Consumption: 1.5mA peak
- Receiving angle: 90 °
- Reception distance: 17m
Rs 220.00KY-022 IR Receiver Module
Rs 220.00 -
MAX485 RS485 to TTL module
Quick Info :
- Working voltage：5V
- Connect to 2P terminal on board, for wiring of RS-485 to communicate
Rs 220.00MAX485 RS485 to TTL module
Rs 220.00 -
SVF7N65CF N Channel MOSFET
Quick Info :
- Drain Source Voltage (Vdss): 650V
- Continuous Drain Current (Id) : 7A
- Drain Source On Resistance (RDS(on)@Vgs,Id) : 1.4Ω@10V,3.5A
- Power Dissipation (Pd) : 46W
Rs 210.00SVF7N65CF N Channel MOSFET
Rs 210.00